Lightroom :: Opening Files In ACR
Jan 22, 2014I am looking for the way to open JPEG and CR2 files in Adobe Camera Raw from Lightroom.
View 4 RepliesI am looking for the way to open JPEG and CR2 files in Adobe Camera Raw from Lightroom.
View 4 RepliesWhen I attempt to open any file in Lightroom 4 I get the following message: "the file named......is off line or missing", in develop the message is "the folder cannot be found".I can open the files in Photoshop 6 with no problem.
View 2 Replies View RelatedI have a bunch of bmp files that I made by scanning old 35mm slides. Photoshop opens them with no problem, lets me modify and save. Lightroom can't see them (NO photos found). LR does see tiffs made from the same bmp files. Do I take away from this that LR cannot deal with bmp files, or (I hope) am I just missing something basic?
View 9 Replies View RelatedMy previews are tagged with an ! and prompt a "this file cannot be read due to an error' when in Develop mode
View 9 Replies View RelatedI upgraded from LR2 to 3 a while ago, and recently, I've had an odd problem opening my lightly edited files into CS4. I just do command E on my mac, and they open right into CS4. When the image(s) open, they almost seem completely desaturated? I shoot a nikon D700, raw, copy the NEF files into LR3 upon import, do light edits in LR (white balance, recovery, tone curve, some adjustment brush...) and then will open selected files into CS4 for futher tweaking. Why these images are doing this? If I go back into lightroom and "reset all settings" and then open, the images open fine.
Here is a screen shot showing the image in LR (left) and then how it opens in CS4.
I'm currently running version 3.6 of lightroom and 11.0.2 of CS4
Opening my raw files in Ligthroom makes them yellow. Exporting my yellow files from LR tot Photoshop Elements gives them back their right colors.
Camera: Sony Nex 7
Windows 7
Monitor: Samsung Syncmaster 225BW
I have the trail version of LR. It seems to be nice software but....
Every time I open a RAW file into Photoshop CS5 from LR3, it automatically creates and saves a PSD or TIFF file. Is there a way to stop lightroom from doing this? When I used LR2, I saved these files only if I choose to. I always convert my files to jpg after I'm done editing in PS and don't need these huge files hanging around.
View 13 Replies View RelatedMy main user folder on the iMac is set to be shared (read/write, including all enclosed files) with my MacBook Pro. The job is a series of one-page InDesign files (they are newspaper advertisements). The IDD files contain a series of Illustrator files with linked PSD files.The idea is that we can both work on the .idd and .ai files in the same folder at the same time.
It's all working fine EXCEPT that whenever an .ai file is opened on the MacBook, Illustrator doesn't know where the linked PSD files are. We can update the link, but when the .ai file is then opened on the iMac and saved, the same thing happens the next time it is opened on the Macbook.
I don't want to embed the PSD files into the .ai files as sometimes I have to modify them and they can be linked to up to 20 .ai files.
G5 iMac OSX 10.7.5 / Macbook Pro OSX 10.8.2 / networked via FireWire cable / file sharing on, laptop user has Administrator status, all files are read/write, permissions include all enclosed files / CS6
Date/Time: 2013-04-07 14:58:28 +0200
OS Version: 10.7.5 (Build 11G63b)
Architecture: x86_64
Report Version: 9
Command: Illustrator
Path: /Applications/Adobe Illustrator CS6/Adobe Illustrator.app/Contents/MacOS/Adobe Illustrator
Version: 723 (16.0.0)
Parent: launchd [132]
PID: 10493
Event: hang
Duration: 0.83s
Steps: 10 (100ms sampling interval)
Pageins: 19
Pageouts: 0
I recently purchased CS6 and loaded it to my desktop PC running Windows 7 and everyhing is fine.
I recently purchased a new laptop and loaded a second copy to it (running Windows 8). When I process a RAW file and try to open it in PS6 about every 4th file does not appear in the PS6 workspace. The file details show in the top left corner, the background layer appear, I supposedly can save this file but I cannot see anything. When I close PS6 and re-open it and re-open the ACR file, then open to PS6 if works fine.
I have Photshop CS6 Extended but when I click on the .cr2 which is the RAW file I keep getting an error message "Could not complete your request because it is not the right kind of document"
I have tried installing the camera raw plugin Photoshop Camera Raw 7.1
Installation failed. Error Code: U44M2P7
CS5 won't open RAW (NEF) files from camera on list (Nikon D3000). My updates are current. What next?
View 22 Replies View RelatedI am running CS4. I have downloaded all recent upgrades. I have upgraded my camera body from a Nikon D90 to a D7000. Photoshop will not open the D7000 RAW NEF files. Jpeg files are fine.
View 2 Replies View RelatedYesterday, before closing down, I uninstalled P/S 7, CS2 and CS3 to gain space, but do not know whether that action is relevant to my problem. Today I find that JPEGs will not open in Photoshop, and in Bridge only by going through Camera Raw. Photoshop will open tiffs, while Bridge will open some, but not all tiffs, through Camera Raw only. This problem follows many months of trouble-free operation of CS6.
My operating system is Windows 7 Ultimate. I have downloaded the latest patches for CS6, and have set the Bridge Preferences item on File Associations to Default.
I am using win 7 and CS5. I have both JPG and RAW files; however all of a sudden when I attempt to open some JPG files, they somehow are vertically truncated only opening halfh the picture.
View 3 Replies View RelatedI was sent a file from AI for reproduction in .eps format. Corel X6 distorts the art on import or open. The same file given to me as a pdf is fine. Corel Draw's strength is it's import abilities, and I expected X6 to cope with anything Adobe could throw at it from current releases.
View 14 Replies View RelatedMost of the ai files I receive show to be compressed and I cannot do anything with them. I think I should be able to open them with CD X4, which is installed alone and also in a bundle with my Wilcom digitizing program.
Someone indicated that the two installations on one computer could cause problems, but it is convenient having both readily available.
i use corel x4at home load my files onto a flash drive ad ake them to work where we use x3 and i cannot open my cdr files.
View 1 Replies View Relatedwant to open raw files. Add on?
View 1 Replies View RelatedThis problem just started recently on my PhotoShop 7.
I try to open an EPS file that was created in Illustrator or Freehand (or any other EPS that is not a Photoshop EPS), it opens up
as a blank document, like a transparent layer (you just see the
gray and white checkerboard background).
This happens whether I try to open the file by FILE>OPEN or if I drag the EPS file over the PS7 icon.
I tried everything and looked everywhere but without success.
I had bought CS4 and Lightroom from Adobe.
My raw files ( nef as well as dng) open fine on it, however when they are converted, there is a mesh in front of the image.
My jpg files previously adjusted in CS2 also do not open properly with same mesh in front of them.
I cannot see open files in the workspace on cs3, the file will show thunbnail in the layers box but will not open in workspace.
View 4 Replies View RelatedI have two different psd files I cannot open. I last worked on these files May 30th. For each of them I completed a detailed mask, added a path and saved the files without changing the name. Today I went to work on my project and could not open either file.
When opening the 1st file I got this error message: Could not complete your request becaus the file is not compatible with this version of Photoship. When opening the 2nd file I got this error message: Could not complete your request because it is a not a valid Photoshop document.
I just bought a 50D and did a wedding. I have a new photoshop CS4. I just downloaded the most recent update. None of my RAW images will open in photoshop. They open in the Canon software that came with my camera, but won't open in Photoshop.
View 4 Replies View Relatedworking with Photoshop 7.
I have CS2 at home and have been having trouble getting certain 7 files to open in my CS2.
I have a question about opening a .dds file to make skin for a car in RACE 07.
I have already installed the NVIDIA DDS plug-in and it used to work on PS CS2. Now I tried it on CS3 and at first it said that it was an unknown file format or something (don't remember the exact error). So I first re-installed the plugin. When that didn't work, I copied the dds.8BI file from the Plug-Ins folder in the CS2 folder to the Plug-Ins folder in the CS3 folder on my external HDD. Then I had the same error on both photoshops: "Could not complete your request because the file-format module cannot parse the file."
Will Photoshop CS2 read these, or do I have to use another software.... If so, what software?
View 4 Replies View RelatedI originally installed the software on my second drive which is intalled in my computer casing. This is due to limited space I have on my "C" drive, this is where the file "MyPictures" are also found.
Through Bridge, I can go through the "mypictures" file without a problem, however, if I am in photoshop the minute I go through the "open" fil commande the window opens I see the files but the computer freezes and I have to shut down the program.
I have received many suggestions to which none have resolved the problem. I have moved stuff around and I am now able to fit on the "C" drive the program (Photoshop) and "MyPictures" onto it. It did not solve the program either.
I have a folder of about 3000 images to edit and they're all in EPS format. Not having Photo Shop on my computer, I turned to GIMP.
I located several sources on the internet, all calling for the installation of Ghost Scripts. After trying and failing, I did some more poking around and found that some users were having trouble with opening EPS files in the current version of GIMP, and solved the issue by installing a previous version.
Before I start flailing around with various versions, I figured it would be best to find a place where experts reside.
Even though they are saved as AI. On other computers it opens properly. The few files I can open, I can't select using the selection tool because of a clipping mask I cannot get rid of.
View 2 Replies View RelatedI am wondering how it may be possible to open PP CS 6 files with CS 4. There was an earlier listing to modify some code to change Version "25" to Version "24" for v5.5.
View 2 Replies View Related