Lightroom :: Creating A Poster In Contact Print Module
Feb 13, 2013
I've been able to use the contact print area in earlier lightroom programs to create nice grid posters of events, characters in a play, etc. without any type under the images ie frame #s etc. I'm stuck in LR4 and can't get rid of the type and also can't seem to expand out the images to fill the white space in the poster to have just a grid, perhaps with some dark lines around the images.Is there a way to do this in LR4? or do I have to do the whole thing in Photoshop or in design.
View 1 Replies
ADVERTISEMENT
Jul 18, 2012
Can you change the order of images in contact sheet in Lightroom 4 Print module?
View 2 Replies
View Related
Nov 25, 2012
In LR4 print module the print and print one tabs are greyed out and I can't reset.
View 1 Replies
View Related
Mar 4, 2013
Lightroom 4 consistently crashes every time I attempt to print a contact sheet containing over 12 images. Any less and the task is completed without error, any more and it inevitably crashes.
My workaround has been to export the images and create large contact sheets in Photoshop CS6, but this takes twice as long. This is a daily task and is significantly disrupting my workflow.
View 2 Replies
View Related
Nov 20, 2010
When it's time to print and save contact / index sheets, Lightroom enters another dimension.
Workflow as normal up to this point: Import (with 1:1 previews) a folder of NEF+JPGs, maybe a hundred or two. Edit, rename and export. Enter the Print module and setup (for the thousandth time) a contact sheet showing maybe 30-50 pics per page.
Select "Draft Mode Printing" and hit PRINT and sit. The "preparing print job" progress bar appears and starts to tick off images, at about 10 seconds apiece. In LR2 this *entire process* took 1-2 seconds. So, an hour and a half later, my contact sheets are ready. I could hand-draw them faster.
It does it in LR3, LR3.2 and LR 3.3. It *never* did it in LR1-2.7.
Mac OS 10.6.4
2.66 GHz Quad Core MacPro
8GB RAM
View 4 Replies
View Related
Apr 1, 2013
I am trying to print contact sheets in Bridge using keywords and/or star ratings from Lightroom. I'm doing that because rendering is incredibly slow if I try to do the same thing in LR even when I choose 240 ppi in the menu.
In Lightroom, I have selected "automatically write changes into XMP. For the folder and subfolders I'm working with, I have selected all of the images and hit command S to write all of the images into metadata. I've done this with the whole folder and with all of the subfolders as well. None of the star ratings show up in Bridge.
When I open Bridge, some of the folders show the keywords while others that I have processed the exact same way do not. All of the images are NEFs shot with at Nikon D800.
I've also tried opening and closing Bridge as well as purging the cache.
I'm on a Macbook Pro early 2011 running OS 10.8.6.
View 4 Replies
View Related
Nov 1, 2013
I wanted to create an A4 borderless print in my canon mg6150 from within the print module. I can do a borderless print using the canon easyprint.
I go into page setup and the properties of my printer and set the page layout to borderless and click OK.
However, I am unable to set the margins to zero. When I go back into my page setup and check the page layout, it has reverted to normal so it has ignored my setting.
View 2 Replies
View Related
Jan 7, 2014
All was working OK and the printer is showing ink cartridges almost full In the Library Module the print review is fine.
Switch to Print Module and the print review is now blank (100% white)
Pictures no longer print
Windows 7
Espon Artisan 835 printer
LR5.3
View 1 Replies
View Related
Mar 27, 2012
When I construct a multi image contact sheet and send it to my printer the file is aborted. Mac Pro, 15 GB ram, OSX 10.6.8, Epson 7890. LR4.
View 2 Replies
View Related
Apr 1, 2012
I cannot seem to reset the print template screen while in the " Print " module. It has adopted the smallest pic size with three times the normal border. I wish to reset to full screen in print module
View 1 Replies
View Related
Oct 14, 2012
How to ADD (almost) white Border around photo(s) to print in print module (not for creating a JPEG) WITHOUT TRIMMING the photo?
I dont understand why I'm so stupid not to be able to acheeve this simple task with Lightroom WITHOUT TRIMMING the image (altering it's proportion and cutting away photo-content)
(on light-gray backgrownd for instance, to use as cutting indications. I know how to use cutting-indications for images i print without a border)
(i do not whant to use workarounds, the kind of preparing "identity plates", a new one each for infinite variations of proportions to use as fullblown-up backgrounds..)
View 1 Replies
View Related
Mar 13, 2013
My "Print One" button in the Print Module of LR3 is not activated. What is amiss and how do I reactivate the button?
View 1 Replies
View Related
Jun 29, 2013
I am trying to print a 16" x 20" photo through Lightroom's print module. I am using an Epson 3880 printer and 17" x 22" paper. I have done this in Lightroom 4 with no problems. Now I am getting a print that is 16-3/8" x 20-1/2". I have the cell size set at 16" x 20" and borderless printing is turned off. I also checked zoomed to fill. This has also happened on a couple of 12" x 18" photos.
View 2 Replies
View Related
Nov 1, 2012
I get a pop up of "Save Files To Folder", but no file names are present, so "save" does nothing. I have all the boxes checked in Print Job, e.g. print to Jpeg file. I have searched, re-read Kelby etc. and come up blank. I have a profile entered for a custom lab.
View 1 Replies
View Related
Dec 6, 2012
A few weeks ago I tried to print from the print module and instead of a picture showing up, there was a white space. I have uninstalled and reinstalled LR 3 times.
View 2 Replies
View Related
Dec 27, 2011
When I try to print a JPG from the Print module in LR 3.6 (and tried it also with 3.5), it does not always recognize the resolution settings. Most of the time (and I can't see what makes the difference) it prints the JPG to a 96 ppi resolution regardless of what setting I use for resolution.
View 6 Replies
View Related
Feb 10, 2014
I want to print a photo in 5x7in.I have a Epson Stylus Photo PX710W printer. I select it from Page Setup button.Then i select the paper size as 5x7in (13x18cm)
But i couldnt set the margins in same size.Left, right and top can be set as 2,8mm. minimum but bottom can set to 3,2mm.Zoom to fill and rotate to fitt both are selected.
Cell size is: 121,0mm. maximum size.
Cell widht is: 172,1mm. maximum size.
I uninstalled my Printer's drivers and software and reinstalled it, but nothing has changed.Then i reinstalled Lightroom but no changes.I use the latest Lightroom 5.3
View 2 Replies
View Related
Nov 26, 2012
I am trying to add new Epson ICC profiles to my lightroom4 print module. I downloaded them from Epson but I do not see them in my ICC list that exhists in the print module uner Other for color managment
View 2 Replies
View Related
Nov 25, 2012
get message in header that Libary Not responding. Cannot even get print to open - get the loading "circle" have waited a long time.
i have win 7 64 bit. 8 g ram
View 2 Replies
View Related
Jan 22, 2012
When I set a margin with the Print module (Lr v3), does it also include the "page bleed" dimension the printer requires for properly printing the bottom of the page?
The problem I'm having is with printing landscape prints and the left & right margins not being equal. I cannot find anything about the page bleed dimensions for my HP B9180 printer and maybe it varies a bit (1mm?) from one B9180 to another(?) In any case, is there a systematic approach for determining the page bleed for a printer? I imagine the only way to accommodate for the asymetry is to account for it in top/bottom margins, correct(?)
View 3 Replies
View Related
Nov 4, 2012
MBP Late 2011 running OS X 10.8.2
16 GB ram
300GB+ free
I last printed about a week ago. Trying to print now results in an immediate crash. Tried multiple photos from different cameras and different catalogs. Different printers including printing to pdf all crash immediately. Repaired disk permissions. Reinstalled the app. Reinstalled Mountain Lion, uninstalled (to trash, empty trash, shut down and reinstall, no dice).
Can print from MS Word no problem. Photoshop Elements 9 prints photos just fine.
Crashes in a variety of low to mid thirties thread (lowest I have seen is 28, highest is 35) but I have not checked every crash report for the thread number.
View 2 Replies
View Related
Jun 18, 2012
want to add text twice in print module, seems only option is identity plate and it cant be duplicated?
View 2 Replies
View Related
Oct 15, 2013
Is it possible to zoom in on the page you are creating in LR4? I intend to make a poster apx. 50x80 cm with a lot of small photos on it. Without a zoom it will be difficult to position each little photo correctly
View 2 Replies
View Related
Mar 21, 2012
When I try to switch to the Print module in LR 4, the program locks up. I am using Windows 7.
View 2 Replies
View Related
Dec 12, 2013
using lightroom 4 in print module only filmstrip is grayed out and will not print, it is normal in other modes
i just upgraded the catalog to Lightroom 5 and i have exactly the same problem.
View 2 Replies
View Related
Feb 20, 2010
Whenever I try to enter the print module Windows tells me Lightroom has encountered a problem and needs to close. The print module worked fine some weeks ago, but now it doesn't. Everything else seems to work fine.
First thing I tried was to relaunch and optimize my catalog which didn't work.
I then tried to reinstall LR 2.4 with no luck. I then Downloaded and installed 2.6, still no luck.
I had cleaned the registry after the print module worked last time, so I reloaded the registry with those values, still no luck.
I then deleted Lightroom 2 Preferences.agprefs and let LR relaunch to create a new one. Now the print module works.
As I am not using the default catalog I went into preferences and pointed LR to my catalogue and then relaunched again thinking the problem was solved. But when I tried to go into the Print module LR crashed again.
I figured that since the Print module worked with the empty default catalog the error must lie somewhere in my catalog. I therefore went back and tried using one of my backup catalogs, but LR crashed again when I tried to access the Print module. I even went back and tried all my backup catalogs and a couple of the oldest ones does not cause LR to crash when going into the Print module.
I'm on Vista with 4 gb of RAM, using dual monitors, and I've tried reducing the resolution and using only one screen as well.
So, my question is what could possibly go wrong inside a catalog file that would cause LR to crash in one module only? And why is it that the backups saved even the month before I last used the print module also causes the problem? Seeing as how I've been using that very same catalog and having a working print module?
View 6 Replies
View Related
Apr 26, 2013
Out of nowhere, the 'Save As' function isn't available in the Print Module. I have updated to 4.4, restarted Lightroom, etc. I can still export the images, just not save as a jpg.
View 19 Replies
View Related
Jul 25, 2012
I am trying to print a landscape oriented image. I choose an 11 x 17 paper size (entered as a custom size) to accommodate the print.
In Page Setup I choose landscape mode. On screen the paper is landscape but the image is vertical. When I choose vertical mode, the paper is vertical but the image is horizontal.
I try to switch width and height in Manage Custom Sizes but it only makes the opposite happen from the above scenario.
When I print, the paper is vertical with half the image printed horizontal.
View 3 Replies
View Related
Dec 12, 2012
When going from any module into the Print Module, Lightroom crashes. Another thread suggested using a new catalog without any templates. I did and the application did not crash. Unfortunately, Lightroom is now booting into the print module with the catalog that is causing it to crash. From previous threads it sounds as if the issue was print templates. How do I delete the error causing templates?
View 4 Replies
View Related
Mar 21, 2014
The filmstrip is dim in print module. Everything else is visible.
View 3 Replies
View Related
Dec 27, 2011
I am trying to produce postcards from one single image with Lr template 2-Up Greeting card, but can apply identity plate only once. How can I use identity plate twice on one A4 sheet with 2 images, so each image is with the same text?
View 1 Replies
View Related
