I can't get the crop tool to crop in Custom mode. I unlock the lock and set to Custom and relock the lock. As soon as I begin the crop it reverts to Original. I've restarted.
View 1 Replieswhen I select the crop tool, my image disappears during the entire crop process. I can only see the image in the preview pane. Why is this happening? I am using the most current version of Lightroom, and I am on a PC.
View 1 Replies View RelatedHow do I set the crop tool in Lightroom to crop only one aspect at a time (e.g. - vertical). Right now all crops do a vertical and horizontal at once.
View 1 Replies View RelatedI'm using LR 4.4 and I'm trying to do a custom crop (I have done this a million times) 12.75" x 10" and it won't take it. However, if I go to the Print module my picture dimensions are showing correct so I go to print and it prints a totally different size. Is it a bug with 4.4 or with me?
View 2 Replies View RelatedOperating system is Windows 7. LR 4.3 installed.
View 8 Replies View RelatedI cannot remove old settings/measurements from Lightroom 4.1 crop custom settings panel. I thought it was supposed to remove old ones as new were added this is not happening.the panel is full and I cannot remove to add new.
View 1 Replies View RelatedI would like to able to clean previously entered custom crop ratios.
View 1 Replies View Relatedmost of my crops are set for custom. i want an 8x10 print. if i change the aspect ratio from custom to 4.5/8x10 it screws up my crop completely. that means that i cannot upload to an online website, be printed automatically and have it come out the way it want. but can that custom crop image be printed 8x10 manually?
View 2 Replies View RelatedIs there a way I can save a custom crop preset to apply to images on import on Lr3.5?
View 4 Replies View RelatedIn the old days, one could just use the crop tool and, while drawing crop lines, check the perspective box if you found that you needed to change the perspective. With CS6 if you start with the crop tool, and find you want to change the perspective, you have to change tools to the new perspective crop tool. In the process, you have to tell the newly opened dialog box that you don't want to crop, to get to the perspective tool, which now has reset to its defaults. You've lost your cropping and you have to start over.
View 9 Replies View RelatedDoes LR 5.3 have a crop tool?
View 9 Replies View RelatedI'm new to Lightroom - my workflow sees me crop a batch of photos one after the other. In LR every time I accept a crop and right click to move to the next photo I need to use the R key or choose the crop tool to do the same cropping to the next photo and the next and the next etc.
Is there a way to keep the crop tool active as you move through images?
I have a large number of RAW photos from a Canon 7D which are destined for use in a Premiere Pro CS6 project.
I want to crop each of them to the preset 16x9 1920 x 1080.
What I would like to happen is that when I open the photo in the develop module and press the R button to open the Crop and Straighten tool, that the Aspect 16X9 crop overlay is selected be default, rather then the "original".
This would save me a lot of mouse clicks...
Or perhaps it's possible to assign a keyboard shortcut to that particular aspect so I can press R and then something else?
how do i use the crop tool to make a square that i can move around the image to crop?
View 1 Replies View RelatedI have AC 2010 LT. I have added a printer which is actually a driver for a laser cutting machine. I have been able to add the cutom media size of the machine. I cannot get that size to stick with the printer name. Every time I choose that printer I have to reset the media to the custom size.
View 4 Replies View RelatedI'm cropping a few thousand pictures, and the crop tool is just sluggish.
Changing the crop or moving the picture behind the crop is jumpy, sometimes it needs seconds to change the display, which makes cropping pain to work.
Even after the picture is loaded and the lightroom rested some time, cropping is sluggish, which should not be, since the picture is fully in the memory and moving it around should be easy for the computer.
So how can I get the crop tool to move faster?
I'm using a Win7 Core i7-2600 with 16GB Ram, LR catalogue on Intel SSD, images on a fast SeaGate HDD, AMD Radeon HD 6800 grafics adapter, 30" (2560x1600) display. The files are NEF from a Nikon D800E, but the files from my D700 are slow, too.
I can't find the aspect ratio crop tool in my Lightroom 4. Is there someplace in the settings I can turn that option on?
View 1 Replies View RelatedI cannot find and apply the Leveling Tool in the Crop function. Where is this tool and how caqn I apply it?
View 1 Replies View RelatedThis is a sudden change of behavior in Lightroom 4.4, Mac OS 10.7.5.
In the past, when I chose the crop tool, with the locked icon in the locked position, when I adjusted the crop, the crop was constrained to the original aspect ratio of the photo. Now, no matter what I do, the crop is kind of "partly" constrained. That is, I start with a vertical image, then drag the crop down so that the crop rectangle has a horizontal aspect ratio, I can drag up on the horizontal crop rectangle so that the original aspect ratio is no longer preserved. Until the aspect ratio has gone horizontal, the original aspect ratio is preserved. It doesn't matter if the lock is locked or unlocked, or whether I hold the shift key or not.
Here's an example:
at this point, the crop is still vertical, with aspect ratio constrained. It's still "as shot" and the padlock icon is locked
Here, the crop is now horizontal, but the aspect ratio is still constrained, "as shot" and still the icon is locked.
Now, things have gotten wonky. When the right edge of the crop hits the edge of the photo, it's possible to drag it upwards. The aspect ration is no longer constrained, and even though the padlock icon is locked the aspect is now "Custom"
As I said, this is new behavior which I have never seen since the version of Lightroom included the crop tool (I started at Lightroom 1.0). Like they all say "I haven't changed anything", but something obviously has changed. I don't believe this is correct behavior, or the behavior I've been used to for years. Is there any way to think this is the correct behavior?
I noticed it sometimes happens on some (most) photos, but not all, and will seemingly randomly start/stop working properly on photos that weren't/were working just minutes before.
The "Done" button that appears at the bottom when using the Crop & Straightening tool and others has suddenly disappeared. I thought it was a full screen issue but cycling through F doesn't restore it.
View 2 Replies View RelatedI am currently in the process of testing LR4 and use a LR3 library that I converted to LR4.
If I rotate an image from (or to) landscape/portrait I cannot use the crop/rotate tool anymore by pulling the edges. The control sliders work, but not the active corners. If I put the image back to the original position, things work like a charm.
Running Lion/16GB/i7
I am a labtech at a community college and look after 48 mac pros in which the students use the entire creative suite. (I only mention this becuase any answers need to consider variations in system settings or photoshop settings. college students get into everything!)
But the issue is when you select the crop tool and enter a custom constraint and crop
The image size is sometimes a full 2 inches off of what you set as a crop?! I havn't run into this before
[I do know you can use the drop down box and use {size and resolution} but I want to know why it doesnt work under custom and unconstrained]
using the crop tool to highlight a picture and crop the sides?
View 1 Replies View RelatedI am missing a crop tool which can rotate the crop rectangle. Similar to photoshop's tool. I found no way to rotate the crop rectangle in gimp. How do you cut out something from an image if it needs to be rotated while cropping? I tried rotating first then cropping but it does not give me enough precision so I end up with transparent areas at the border.
View 5 Replies View RelatedI'm new to LR4 and after I move the photo corners to use the crop tool, the white hand doesn't appear when I hover over the photo to then move it around....
View 5 Replies View RelatedThis is related to AutoCAD 2005 only:
I have a custom menu file which is NOT located in the support path but rather is on a server drive for all AC 2005 user's to access. When I load this menu in AC 2005 and then restart, it is gone and has to be reloaded. This is happening for all 2005 users in this office. With AC 2009 we use CUI and that custom file is also located on the server, not in the support path, but the 2009 machines are working fine. It is only the AC 2005 users who keep loosing their menu item each morning.
I have done extensive searching on this and it appears to be a common problem but the thing which is also common to all the posts and articles I read on it is that none of them offer a resolution which actually works.
As a pro, I crop all my photos.I normally use the forward arrow to move through each image, but with the crop tool the forward arrow doesn't work for advancing to the next frame.It only adjusts the crop.This is extremely frustrating for me as it slows down my workflow.
Is there a one key shortcut, within the Crop Tool -- that permits us to move forward from frame to frame?I wish the forward key worked for this within the crop tool!
Is there an easy answer or a way to format something in Lightroom -- so I can have a one-key method to advance frames within the Crop tool?
Just recently upgraded from Photoshop CS5.5 64bit to Photoshop CS6 64 bit. Crashes when using burn tool, crop tool, or dodge tool?
View 2 Replies View RelatedWhat causes the hand tool on CS5 illustrator to stay on and you can not take it off or use any other tool?
View 3 Replies View RelatedWhen I click once on a tool to choose it, the tool's options (ex. the 3 options of the lasso) stay displayed so that I have to re-click (anywhere) before I can use it. This by opposition to the normal behavior of PS that is when you click on a tool it is choosen and you can use it right away. I must have change a preference but I can't find wich. Photoshop CS3 extended (10.0) on Mac
View 12 Replies View RelatedThe problem with the ruler tool is that when I select another tool the former DOES not stay visible. something I need.
For example, I make a measurement with the ruler tool, then select the move tool and the mesurement made dissapears from the document