Lightroom :: 4 And Photoshop CS5 Cut And Paste?
May 14, 2012
I've begun using LR4 for website photo editing, but I'm finding that I still need to move the LR modified images into PS for cropping, final size, and resolution adjustments. When I chose Photo>Edit in>Edit in Adobe Photoshop CS5, I've been selecting, "Edit a Copy with Lightroom Adjustments", which works fine.
However, when I cut and paste the resized LR image into another PS document, usually a master template, ALL of my LR adjustments dissapear and the photo is restored to its original settings. How can I keep all of the LR adjustments during a cut and paste operation within PS?
View 1 Replies
ADVERTISEMENT
Jun 25, 2012
I transfer my adjustments from lightroom to photoshop for additional editing. The adjustments show in the new Photoshop file. However, when I make a selection from that file and copy and paste it into a different Ps file, it does not show the adjustments. I even tryed saving the adjusted photoshop file as a jpeg and then opening it up and reselecting what I want.....Copy and paste it.....and the adjustments still don't appear on the different Ps file/photo. How can I keep the adjustments made in lightroom as a selection to copy and paste to a new file?
View 2 Replies
View Related
Nov 6, 2011
Having a problem with Paste and Paste as Block in the right mouse click drop down window.
In the right Mouse click drop down window the Paste, Paste as Block and the Paste to Original Coordinates are grayed out.
The copy with Base Point works, as does the Ctrl+V and Ctrl+Shift+V and repeat Paste Block from the recent Input drop down selection. Why the paste commands are grayed out?
View 5 Replies
View Related
Jan 21, 2014
I have corrected my saturation on a photo in the Develop module and would like to copy that saturation to other photos. I click 'copy' in the lower left and get the dialog to select my choice of settings, so I only check saturation. I then move to my desired recipient image and click 'paste' and nothing happens. Same result in Library module when I use Photo > Develop Settings > Copy Settings and Paste Settings.
I am using LR 5.3 on Windows Pro 7
View 6 Replies
View Related
Sep 4, 2013
I have an image from a 7D to which I have only applied Enable Lens Profile, Remove CA, Constrain to warp, Manual Vert Perspective and Crop with Constrain Aspect Ratio Switched off.
The cropped dimensions of this image is now 2763 x 4472.
If I copy all settings and paste to a fresh untouched virtual copy of this image the resulting size is 2752 x 4453. The shot is part of a bracketed tripod shoot in AV mode, if I copy and paste to the other two untouched images the resulting size is also 2752 x 4453.
View 4 Replies
View Related
Apr 4, 2012
What is the most efficient way to cut and paste a paragraph from Word and paste it as text in AutoCAD ?
View 9 Replies
View Related
May 30, 2012
I'm trying to take some writing from one image and paste it onto another photo.
View 1 Replies
View Related
Jul 28, 2012
Is it possible to copy and paste part of an image in one photo to another in LR4? I have a pc.
View 1 Replies
View Related
Jun 22, 2012
Recently upgraded to LR 4.1.The copy and paste settings and also synchronize setttings in LR 4.1 has stopped working. Rebooted, nothing new added.
View 14 Replies
View Related
Jul 12, 2012
I finally figured out why LR sometimes ignores the paste command and if not a bug, it is at least a problem that can adversely affect the unsuspecting user. Pasting a WB does not always work if both the source/target are both "As Shot", and yet the Temp/Tint are still different. It seems priority should be given to the actual numbers instead of the As shot status, which (in my case) could vary between cameras. The logic is a bit strange.
I can see how whether or not this is a bug is debatable, but it seems more useful to have it work the other way. There should at least be a message when the paste command results in no expected action (I expect the actual WB numbers to take priority over "as shot").
View 21 Replies
View Related
Mar 19, 2013
The question is basically when you copy the White Balance setting from one image and paste it into another, is the pasted setting an absolute value or a relative value?
For example... I import three RAW images, each shot with Auto White Balance.
Image #1 is a gray card and with a WB of 6500K.Image #2 is a product shot with a WB of 6000KImage #3 is a product shot with a WB of 6200K
Let's say I adjust the WB in Image #1 to 6400K - an adjustment of -100K from the "as shot" WB.
When I copy those WB settings from Image #1 to Images #2 and #3, will the target images get an absolute value of 6400K? Or an adjustment of -100K?
Would I have:
Image #1 = 6400KImage #2 = 6400KImage #3 = 6400K
... or ...
Image #1 = 6400KImage #2 = 5900KImage #3 = 6100K
View 2 Replies
View Related
Nov 26, 2012
So here's the problem: I am working for a photo journalist/traveling photographer moving his 8tb database into Lightroom 4.Now, for whatever reason, he wants the ISPC-metadata headline, the title, and the caption to be same for each picture. What I mean by that is not simply giving every picture the same exact name, but rather have a picture with the headline "Machu Pichu during Sunset" also have the title ""Machu Pichu during Sunset" and the caption "Machu Pichu during Sunset". So far I've done copy and paste between those boxes (I usually only have a headline) for every single picture, but as you might imagine, with 8tb, this will drive you absolutely insane. What I'd like is to have is some sort of Metadata preset telling Lightroom to just take the headline and copy and paste it to title and caption. Is there any way that is possible? This would really save me tons of completely redundant work.
View 1 Replies
View Related
Mar 12, 2012
Only just noticed this one since upgrading from LR4 Beta to LR4. First session developing a few shots taken over the weekend (.CR2 RAW files). When I only have a few shots, all taken in the same environment, I tend to just get the first one right and then Copy the Develop settings, and paste them onto each subsequent shot.
What happens on my 64 bit Windows 7 box - the first time I paste the settings to any shot, I get the task bar appear at the top right, which after a brief time changes to 'task completed' - but no settings have been pasted. If I then paste the settings it works the second time.
View 2 Replies
View Related
Dec 8, 2013
Lightroom 5.2 I have been trieing to copy and paste settings from one .dng file into the next in the develop module. I tried to copy (shift command c) the color temperature and tint and paste in the other file (shift command v) but nor Kelvin nor green magenta balance changes.
View 2 Replies
View Related
Mar 6, 2005
here is the starting text(3 laters total)
Now I want to put all of the text onto a new picture(just text, not the black background, you know what I mean).
But When I try to, I can only select one layer at a time, IE, the gold, the diamonds, etc.
and when i try to line them up on the picture, it isn't successful.
View 8 Replies
View Related
Nov 13, 2008
quick question, after you have cut an image out of one picture, And pasted it onto another, is there a way to alter the size of the pasted part of the picture?
I figured out you use the move tool to move the pasted part to where you want it but it's to big, i need to make the paste a bit smaller.
View 4 Replies
View Related
Mar 19, 2007
I'm new to CS2 been using Elements 5 and decided to make the move into the big stuff. Took several photos, the one I liked the baby's eyes were half closed. I have another photo where his arms moved...blurred; but his eyes are open wide. How do I copy the open eyes and move them onto the closed eye photo? I did it in Elements but want to learn how to do it in CS2.
View 9 Replies
View Related
Apr 23, 2008
I often take screenshots from my screen. I do this by hitting the 'PrtScrn' button on my keyboard. Then I go to PHotoshop, make a new image and paste, but it doesn't paste the recently copied screen that is in the clipboard...?
View 10 Replies
View Related
Sep 23, 2002
I recently started using ps7. Where are the cut and paste options. Like when I make a selection, how do I just cut it from an image, and paste it in another one?
View 11 Replies
View Related
Nov 15, 2012
When I copy a selection from one image in CS6 I am unable to paste it into a second image (same file format, TIF). The Paste command is grayed out. In CS4 I never had this issue. Running it in OS X Snow Leopard.
View 3 Replies
View Related
Jun 28, 2013
I created a selection around a face in one photo, then copied it and tried to paste it into another photo, but it won't paste no matter what I try. The photo I'm copying from is only one layer and I have the move tool selected when I copy. I even created a blank document to paste in that is the same size and resolution as the original photo, but it still won't paste into that either.
What could cause this? And how do I get it to paste again?
View 5 Replies
View Related
Jun 21, 2013
This is the first time it happend.. ?
View 1 Replies
View Related
Oct 2, 2008
I have two layered PSD files the same pixel size.
How can I drag and drop or copy and paste one layer from one doc to another but keep its original location on the "art board"? (X and Y coordinates).
View 2 Replies
View Related
Jul 28, 2006
I am having trouble with cutting out a part of an image and saving whatever I cut out as a different file. Meaning, I only want to save what I cut out.
View 4 Replies
View Related
May 15, 2004
Basicly what I have is a picture on one layer. But I want to take a part of that picture, cut it, and put it on another layer. However, when I use the lasso tool or whatever to select it, I hit Ctrl+X to cut it and Ctrl+V to paste it. It pastes it on a new layer but it's in the center of the image. I want to cut it and paste it in the same spot that I selected it. Is this possible?
View 1 Replies
View Related
May 14, 2006
Is there any way to paste guides, or, putting it another way, can I take an image, add guides, erase the image, keep the guides and paste in another image? Everytime I paste in another image I lose the guides. I want to know where I am in the second.
View 8 Replies
View Related
Apr 24, 2009
I am running Windows Vista Home Premium 64-bit. I am having trouble copying and pasting things. The issue is that after I copy something/Print Screen, it takes several pastes for Photoshop to finally realize the change. Basically, the first couple of times I paste, the thing that was previously copied gets pasted it. I don't know if it's making a difference but it switches the paste to the latest thing that was copied faster after I minimize and maximize back the program. It's extremely annoying especially because then I have to either undo each time/delete the layers. Plus, I do a lot of frame comparisons between different video sources and it's hard to tell whether the thing being pasted was changed or not.
View 1 Replies
View Related
Oct 17, 2005
How do I paste things I have cut out from a picture into another picture? When I try to do it I paste the picture in but its not movable (its just part of the picture).
View 5 Replies
View Related
Aug 22, 2006
How do I do a simple copy of one pixel and paste it to another place (I have zoomed in a lot) or if I have't zoomed in that close, copy some area and paste it to another place?
View 4 Replies
View Related
May 22, 2007
when I copy and paste sometimes the paste is put exactly where I copy from and sometimes PSCS2 (not got CS3 yet) pastes where ever it likes?
View 8 Replies
View Related
Jul 18, 2006
I've been doing PS for 10 years, it's time I learn how to do this... Paste in place? Anybody know how to do it? I'm running PS 7.0 on Windows XP. I make a selection, ctrl+x (cut), ctrl-v (paste) and it always pastes it somewhere other than where I cut it from.
View 5 Replies
View Related
