Illustrator :: Use Eyedropper To Pick Up Gradient Color?
Nov 15, 2013
How do I use eyedropper to pick up a gradient color? I have a color that has 45% opacity on it and I want the exact code of that color. If I use eyepicker, it will only pick up the original color (with 100% gradient). I tried using colourificator. Illustrator picked up that color but when I applied it to the object, it became a different color.
Is there any other way to pick up the exact code of colors that has an opacity? If I am to find the color that has an opacity manually, how would I find it in the color picker?
Below is an example:
1) First circle does not have an opacity.2) Second circle has a 45% opacity on the stroke, and I tried using colouricator to pick up the color3) Colourifator picked up the same color, but when I applied to the third circle, the colour is off.
View 1 Replies
ADVERTISEMENT
Feb 28, 2013
I have been scrolling through this forum and google, and have not found an answer.My Illustrator CS5 has been working all day, and I went away from it momentarily to pack some boxes for moving and the eye dropper tool started picking up colors that didn't exist in the placed image i'm grabbing from.(clearly not black within that circle...)
I "found" a solution on this site where you go into your eyedropper options and make sure your appearance boxes are checked, and they weren't so I did that, and now the eyedropper tool won't pick up any color at all. I have a project deadlines that require this program, and i've tried just about everything but re-installing.
Here are the way my settings are now:
View 2 Replies
View Related
May 4, 2009
I'm trying to pick up color from an image using the eyedropper tool. But it only will pick up white as a color and fill the other object with white, and not the actual pixel color I am trying to grab. This doesn't always happen but I can't figure out why it is happening in this instance.
View 11 Replies
View Related
Nov 11, 2013
How to set my eyedropper tool so that it picks up the result from several layers objects with transparency or different blending modes.
View 3 Replies
View Related
Nov 3, 2012
The background is a gradient mesh(ignore the crosses). I used eyedropper tool(shift-click/normal-click both gave the same result) on the background and it gave me a strange result. As you see the back ground is blue-to-black gradation but the color picked is green-ish from nowhere.
View 8 Replies
View Related
Oct 3, 2012
I know how to use eyedropper to pick up colors and save them into a palette. could I export the colors I picked up (one by one) and save their RGB values into another file directly. Suppose I picked up 10 colors, I want the RGB values of these 10 colors could be retrieved by a single time. Now I have to type these RGB values into another excel sheet one by one.
View 2 Replies
View Related
Jun 25, 2013
I've placed an rgb image and on top of that a vector square which I wanna give the same color as the bright green one in the rgb image. So I used the eyedropper tool on that bright green color. But as you can see it give a more dull greenish color. The document is in rgb mode. I would expect this more when I was working in cmyk but I ain't. Why isn't the eyedropper tool picking the bright green color? The image is in rgb, illustrator is in rgb, in photoshop I can see the bright green color in the rgb image. So why isn't illustrator using this bright green color with it's eyedropper tool?
Turns out the eyedropper tool only works correctly (while illustrator is in rgb color mode and the image placed is also in rgb), when the image placed is embedded and not just linked. After I dragged the image on the page and go to Links to have the image embedded and then use the eyedropper tool, I get the exact same color.
View 2 Replies
View Related
Aug 28, 2012
I have CS5. The bugs and broken features in AICS6, make it unusable in my workflow.
I am specifically concerned about the inability to drag global color swatches from the color panel to Gradient stops in the Gradient Panel. I use this method to update a gradient color because I find it MUCH faster than option-dragging to duplicate a stop color, then deleting the unused stop. Since I do this constantly, I find using CS6 very tedious.
View 4 Replies
View Related
Mar 3, 2014
I've been having this problem for a while with Illustrator CC but not with older versions. If I use the eyedropper to pick up a color, it captures that color and acts like it is applied but object/text continues to stay the older color. With text I have to use the type tool, highlight all of the text, and then select a color. This process if very annoying when I need to highlight and change several text boxes at once. I would like to just be able to click on the object/text and use the eyedropper tool to capture whatever color I need.
View 6 Replies
View Related
May 30, 2013
When I run the script for an object selection, I want each object to have its color set to the underlying color as if I had used the eyedropper tool. Is this something that can be scripted?
View 1 Replies
View Related
Nov 30, 2013
What i do is use the direct selection tool and click an anchor and then click the eyedropper tool on that anchor point What is happening is the the outline color is being selected. So i found out Illustrator CS6 you have to hold shift while clicking the eyedropper. I tried that and still can't get the color of the underneath layer, the fill color stays white? Here is pic:
As you can see in the navigator window, the shade of red is that of the outline and not the apple underneath the outline. I tried shift+eyedropper and white is the only color that get's sampled.
View 6 Replies
View Related
Sep 3, 2013
how do I create a gradient using my own colors? I've recently upgraded form CS3 where I was able to just drag a colour swatch onto the gradient slider to set the colour. Now I can't do that. If I try with one of the default colors it works no problem but if I create my own swatch then I get a circle with a line through it saying I can't do it.
View 5 Replies
View Related
Sep 10, 2013
Is there a way to, as in Photoshop's effects gallery, create a color-overlay on an already-done gradient in Illustrator CS 5.1? I've already done the gradient and I have my color, but can't quite make it work.
View 2 Replies
View Related
May 14, 2013
Imagine a radial gradient that goes from red in the center to transparent. Then cut it in half. Then on the bottom, I need it to go from blue in the center to transparant. Also radial. How do I do this in Illustrator? I want it to look like it's all the same radial gradient... just red on top and blue on the bottom. I've mocked it up in Photoshop below. But I want to know if I can do this in Illustrator.
View 14 Replies
View Related
Aug 14, 2013
Whenever I try to save my .ai file as a .pdf, all the gradients turn white, no matter what settings I use. What its supposed to look like
What it saves as
View 6 Replies
View Related
Aug 10, 2013
How do I add a "Gradient Sliders'" Colour to the Swatches?
I've tried dragging everytihng I can, with no luck.
How do I then take swatches from Illustrator and open them in Indesign?
If you think of the Gradient Sliders as end points,
And why does Illustrator's "help" file refer to them as "stops" but they're called sliders inside the app?
View 9 Replies
View Related
Aug 9, 2012
I would like to change the gradient on the attached to a darker yellow. How do I complete this change in color? I see that I can click on Color and an eyedropper appears but that doesn't get me to the existing colors so that I can change to bit darker yellow.
View 4 Replies
View Related
Aug 8, 2012
I have button drawing for web in Adobe Illustrator format. I'm trying to get fill settings to create the same look with CSS. I can't find what color to use and gradient settings.
View 1 Replies
View Related
Sep 3, 2013
I am working with scripting in Ai, fill gradient color in TextFrame. I search in this forum but the other topics fill color to path or line. For now, I can make a gradient color, but I don't know how to apply it to textframe.
View 6 Replies
View Related
Sep 28, 2012
Is there a way to change an object's fill from a gradient to a solid color that is the average of that gradient? What I want to do is have a grid of squares, select them all and apply a colorful gradient to them as a whole, and then average each square's color so I end up with a pixelated look. Kind of like the mosaic filter in Photoshop, but in vector.
View 3 Replies
View Related
Aug 30, 2013
I often do website images for developers. The problem i am having is matching the web color from a color pick in ps. I have used a method where s i take a screen shot on my MAC and then pull that into PS cs5 (I have cs6 also) and pick. Then i export for web (png or jpeg).
This method gets me inconsistent results.
View 3 Replies
View Related
Sep 20, 2012
All I can find online is to highlight over an area to select multiple mesh points. That will not work in my case. I can't tell illustrator to select same color, the way it does with fills and strokes? I want to change the color and I have to click on every single point again? Ridiculous.
View 3 Replies
View Related
Dec 14, 2012
I create gradients all the time and i'm wondering if there's a quick way to create a gradient based on the current selected object's fill color. For example: I have selected a box with a fill color of BLUE. I go to the gradient panel and see that what the gradient will be if I click on it (that is usally based on a default gradient WHITE to BLACK, or it comes from the most recent gradiented object I touched). So I click on it and the gradient is activated with the stops being not BLUE. What i want is... if i select a box with a BLUE fill and click on gradient - it will create a gradient with both stops being the same BLUE as the fill color. This would be very convenient because instead of clicking on each stop, shift-eyedropping the the blue color from a duplicated box, it would instantly start with the blue-blue gradient for me to tweak (in the case below for a button i would make the higher stop lighter and lower stop darker).
It's somewhat useful to select an object with a gradient to "copy" that gradient, select a new object, click on the gradient panel and have this new object take on that exact gradient. But most of the time i'm not copying gradients but i'm creating new ones, and it makes more sense for me to create a gradient derived from the fill color.
View 14 Replies
View Related
Oct 18, 2013
I have Illustrator CS4. I have created an object with the Blob Brush and filled with gradient color. When I try to add the object it will not be gradient, only a new object with a solid color. Does this not work in CS4?
View 2 Replies
View Related
Jun 17, 2012
How do I apply an eye dropped color directly to a Gradient Shape? Why can't I just do it like I would when applying a flat color with the Eye Dropper?
View 13 Replies
View Related
Apr 18, 2013
My black color slider is stuck as a multicolored gradient. The file was originally in RGB mode and I've seen it happen before but usually if I change my color mode to CMYK the black slider bar goes back to normal.
Any way to fix this with illustrator open? It doesn't go away unless I close and re-open illustrator. I don't think that it affects my output colors...
View 1 Replies
View Related
Dec 3, 2013
Is there any way to sample all of the color points with the gradient mesh tool all at once rather than using the eyedropper one by one on each point??
View 8 Replies
View Related
Jun 2, 2012
I did some battery wraps for a company and they are being printed in China. The background is the default cmyk gradient "copper" and one is "silver" in AI. They are asking me to provide the Pantone or CMYK color code for these colors. Since they are a gradient I am not sure what to tell them.
View 4 Replies
View Related
Aug 30, 2012
if I bring a photo in to Photoshop, at that point I have just a layer and the eyedropper will work just fine selecting which ever color I want from that image. However, if I then bring in and place a second image into photoshop, so that now I have two layers that I'm working on, the eyedropper will not select any color on that new image. Obviously I'm doing something wrong, but can't figure it out. I just want to be able to select a color from that second layer image.
View 3 Replies
View Related
Feb 11, 2013
My eyedropper started picking the wrong color! I ahve reset and reinstalled PS - and still have this problem. No matter what color I click the eyedropper on, it picks a shade darker than what I want. Like I said, I am running PS CS6 on OS Mountain Lion.
View 5 Replies
View Related
Nov 4, 2004
I am trying to use the eyedropper tool to select the font color, but when I click on the eyedropper tool, the font color box disappears.
View 4 Replies
View Related
