I'm creating pin icons for a HTML 5 Map App... I want to center poing (0, 0) to be at the bottom point of the pin... is it posible to do that in Illustrator or do I have to maually edit that in the XML? If it's the latter..
View 1 RepliesIn Photoshop / Illustrator, when I create a polygon, and rotate it around it's center point it wobbles. When I scribe it inside of a perfect circle, and rotate it around the circle's center point it rotates smoothly. Basically proving that (at least according to these Adobe products) that the center point of a circle is different than the center point of a polygon scribed inside of it.
An image – the dots in the center are the corresponding center points according to Adobe:
[URL].......
This is incorrect according to basic math. Is Adobe aware of this bug?
How can I move the center point of an object?
View 2 Replies View RelatedI can't find a way to do this
I often need to repeat an action, such as resize an object proportionally from center (using alt+shift) or rotating for example. I get same object resized or rotated in same place and maintaining it´s center.
But when i repeat the action with control or command D on second object, it does not respect it´s center, while it seems to do it from first object´s center, so it moves.
Is there a way to set the center point for repeat or duplicate?
I'm trying to create a border similar to what you see here:
But I need it to be oval shaped. I tried using the blend tool, which works great around a circle but on an oval, the objects get scrunched together at the peak of the oval. How do you rotate and evenly space the objects around an oval?
I seem to have lost the center line cross hairs in Illustrator CS6.
I draw some shapes, then go to outline mode and the center lines are now missing. They used to work. Still have them in CS5.
Here are a couple of images that show what I mean.
Here in 5 you can see the center points in each shape
Here is a similar picture from 6 with the center points missing.
The center points do show up if I put my cursor over the shape.
I need to find a way how to insert a point or a * on the center point of a hole and put it on a different layer. The reason for this is - I am a CAD tech for a welding shop and we cut parts out of steel and we use the dxf file format for our plasma table to cut parts. For example : if i have a 1 inch thick plate and want to put a 3/4'' hole in the plate the hole will be distorted because the hole is smaller than the material thickness. For these situation we can use the plasma table to burn a point or a dot on the center point of the hole. But to do this the point or dot must be on a different layer in the dxf.
View 2 Replies View RelatedI am saving an adobe illustrator file as a jpeg for print at a photo center. When I export to save with a 300ppi, the photo center (Target) doesn't recognize the jpeg file. When I save for web, the photo center recognizes the file, but it prints very low quality (pixelized). Both jpegs are being saved at high quality.
View 12 Replies View RelatedI'm sure this is mind-numbingly obvious and I am overlooking it, but when I go to use the rotate tool, the center point of the rotation is defaulting to the center of the artboard, not the selected group of objects. How do I change that to default to rotating on the selection center by default?
PS. This is Illustrator CC (17.0.2) on a Mac running 10.9, if that is relevant.
I just want to know that how can I get the center point from a Sketch Object ?
View 1 Replies View RelatedHow to find the center point in auto desk Maya...I know use the center point but i can't find the point..how to find the exact coordinate of the 3d object created using auto desk Maya? [URL]...
View 6 Replies View RelatedI am using to export meshes to OpenGL ES for the Android. What I would like to do is place a rectangle with one corner at (1,1,0) and the other corner at (-1,-1,0) which represents the two corners of the Android screen in OpenGL ES. How would that best be done in 3D Studio MAX?
View 1 Replies View RelatedI have a character model I got from the Evolver site before it went offline.
I need to set the pivot point of the eyes to be at the center of their meshes so I can use it in Face Robot.
I do this by clicking on the eye object and "Affect Pivot Only", "Center to Object". This works but when I export the model as FBX the moment the export has finished my eyes have both jumped to the the floor and my pivot is still in the correct place. When I import the FBX into Softimage I see the eyes are now on the floor. I also have the same when I try to do the pivot point in Softimage [URL]....I am a competent modeller however a begginer when it comes to Autodesk's software. Is their some property on the model that could make it peform liek this, does it have something to do with the bones/skining?
i have spent the last 2 days trying to move an eye balls origin
I'm can't make a center point. how comes
View 5 Replies View RelatedIs it possible to find this center of ellipse by drawing, not mathematically by equation/formula?
View 9 Replies View RelatedHow can I put a light or a point on the center of a rectangle or a circle,and take the elevation from another shape as shown on this picture. aaaaaaoj.jpg
I have tried with Point Filters but the point isn't on the middle and the elevation that I want This is how I did it: [URL]
I have an Adobe Illustrator CS6 document with body copy set using 6.5 pt. Helvetica Neue LT Std. - Bold Condensed & Light Condensed.
After saving the file as a PDF in Illustrator using the [Smallest File Size] setting, closing the file, and opening the newly saved PDF in Illustrator - the 6.5 pt. text is now 5.53 pt. with a vertical scaling of 117.65%.
This PDF is for client review purposes - on screen or laser print - not for reproduction. We try to keep the file size as small as possible to make downloading and e-mail attachments manageable.
In this case, my client is opening the PDF in Illustrator to double-check the text point sizes for legal & regulatory purposes.
If I save the same Illustrator file as a PDF using other settings like [High Quality Print], the text size is unchanged.
I was able to repeat the issue using Helvetica LT Std in place of Helvetica Neue LT Std.
I have attached some screen shots for reference.
Illustrator Source screen shot
Acrobat PDF screen shot
I found this older thread from 2011 where someone had the same issue - but was never resolved: [URL] ....
If i open a new .psd file of any size and i have guide lock on, I get lock lines as i move and object twards the center of the canvas.
So how do you get ps to place guides (H&W) at the center of any doc.
The guides do not lock to a center when i pull them from the ruler. I can not figure out a way to make the ruler show zero at a center point and go =/- out from a zero center point like a number line either.
So, How do i find the center of a doc?
how to I get my center point to show up as a dot as it did in inventor 2010 so I can use it as a point to constrain sketches to?
View 7 Replies View RelatedI made a complex assembly from Solidworks few years ago. I imported it to Inventor 2012. How can I find the coordinate of the center point of the: a) parts/sub-assemblies, b) the complex assembly as a whole? Under Application Options, I have already checked: Sketch->Display->Coordinate system indicator. Under the assembly tree, I can go to the Origin of each sub-assembly/part and make the corresponding Center Point visible. However, I want the x,y,z values.
I copied and pasted a sub-assembly/part to a new assumbly file and then used VRMLout to export. When I imported the .wrl files to another application, the location of the parts/subassembies are not correct. I think they all became (0,0,0).
The screen shot below shows three coincident constraints and a projection icon on the origin.
looks like a projection icon - what does it mean?
I want to delete the three coincident constraints. But when I delete the coincident constraints there is no Sketch origin center point (the sketch origin center point is a square-yellow dot at the x-y intersection). How to delete or move the three coincident constraints with out deleting the sketch origin center point?
I need to find the center point of a viewport in modelspace. I am looking for a vb.Net example but I can't seem to locate one.
View 4 Replies View RelatedI imported some dwg blocks into Inventor with the idea that I use them in conjunction with other parts in an assembly.
View 8 Replies View RelatedWhen inserting a jpeg into a drawing is it possible to insert it via it's center point? I am inserting utillity drawings on to an OS background and if i could insert via the center point it would save me a lot of time.
View 3 Replies View RelatedI used to work with inventor in a class and now lets say i draw a circle of an arbitrary radius/diameter. I mark the center of the circle using the dimcenter command.
I draw a small rectangle around this center mark (this rectangle fits inside of the original circle.)
I want to make each side of the rectangle equally distant from this center point. Since I roughly drew the rectangle around the center point, all sides are not equally distant. How can I do this?
In inventor, I would dimension each side out (dimension from the center point to each side of the rectangle), and double click the dimension and edit the numbers. I would make all the numbers on each side two for example, therefor each side of the rectangle would be two units distance from the center point.
How to set a pivot point to the CENTER of a 3D object in AutoCAD 2014?
View 3 Replies View RelatedHow can I change the center point of the rotation in Paint.NET?
Both Layer Rotation and Selection + Move pixels with right mouse uses the center of the layer/selection as the rotation center (anchor) point.
way to redefine a point that was placed in a model with a "Center of Loop of Edges" command? Inventor doesn't seem to recognize type of placement unless it's been selected from the Point drop-down menu, but picking this in the midst of a redefine only creates a new point, it doesn't redefine the original point.
As it is, I've been forced to just delete the original point, create a new one and go from there.
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014
Dell Precision T1650
Windows 7 Professional SP1 64-bit
Intel E3-1270 V2 3.5GHz / 32G RAM
Nvidia Quadro 2000, Driver 331.82
Space Navigator, Driver Version 6.17.7
change all circles of a certain diameter in a .dxf file to points. I received the following lisp file. For the last 10-12 years it has worked great. We create many custom sized parts that could be cut on a plasma (utilizing the circles for holes) or punched, assigning a crosshair tool to the point. Now we are switching to a laser, and want to etch a crosshair at this same location. Our solution has been to draw the crosshair and copy to each required location. Sometimes this may be 20 to 30 locations. Now I would like to know if there is a way to replace all of these circles with a crosshair. This could be a similar lisp file, or an easier manual operation. I know that I can select all of the circles using the filter command and specifying the radius. But I don't know how to assign the 'crosshair' to these locations. (defun c:ctopt ( / ename cnt ss) (setq ss (ssget "x" '((0 . "CIRCLE")))) (if ss (progn (setq cnt 0) (repeat (sslength ss) (setq ename (ssname ss cnt)) (if (equal (cdr (assoc 40 (entget ename))) 0.025 0.005) ;use this line for a radius 0.025 +/- 0.00015 ;(<= (cdr (assoc 40 (entget ename))) 0.05) ;use this line for a radius of 0.05 or less (progn (entmake (list '(0 . "POINT") (assoc 10 (entget ename))(assoc 8 (entget ename)))) (entdel ename) )) (setq cnt (1+ cnt)) ) ) ) (princ) )
View 3 Replies View RelatedHow to move circle -centerpoint- to the middle of distance between two rectangles?
I am using autocad 2013.
I'm trying to stretch both sides of a bracket evenly from it's center point. How do I set the one (1) stretch action to stretch the two ends evenly with the parameter sets: stretch pair?
View 6 Replies View Related