Every-time I upload a picture on the internet after export it to JPG, PNG or any other format, even after working with RGB/only web colors and exporting for web and devices, I get the same result: An image with terrible colors.
View 9 Replies
I'm on Illustrator CS5 and are trying to export my artwork to a PDF format in such a way as so others with illustrator cannot open the file and access its layers and pull out the artwork etc.
I click File, "Save a copy", choose PDF I thought that is what unchecking the "Preserve Illustrator Editing Capabilities" would do it, but when I uncheck it I still have access all the layers when I open the PDF.
Is there another setting I am missing etc? I've tried saving the artwork as a jpg, and doing print export to PDF but I just cant get the same crispness at the optimised file size like I was when doing "Save a copy".
Am I missing a setting or, do I need to do something else to the artwork before saving the PDF?
At my old job, when I exported sketches, it would automatically go to jpeg as jpeg was on top of the list. Now, I have to scroll through a lot of different formats looking for the jpeg format and of course, this takes up valuable time.
I make tech sheets in Illy at my job and need to export just about everything I do in jpeg format, for the benefit of others. I tried looking through the menus, but haven't found the answer yet.
I remember that there is something to set before doing a psd export from illustrator, but don't remember.Of course i activate the option "with layer" in the export window.Working with CS6.
View 3 Replies View RelatedI have an MS Word 2011 document with an Excel pie chart embedded.Double-clicking the pie chart will open it in Excel 2011.Copying/pasting the chart into Illustrator CS6 results in an uneditable bit image.
Previously, with Word 2008 and Illustrator CS2, this worked perfectly. Mind you, I had tons of excess empty paths and such to scrape out, but still, after a couple of minutes' scraping, I had an editable .ai file ready to be cleaned up, captions typeset, and colors edited for export to .eps and placement in InDesign
In fact, right now I've had to jump over to my old iBook G4 to open my old copies of Word 2008 and Illustrator CS2 in order to do this so I can get this job out the door.Is there any way at all that I can get an Excel 2011 pie chart into Illustrator CS6 as a vector image?
I've tried the shift-click on "Copy Picture" method, but the pie chart still appears as a bit image, and the text is turned to gibberish. Saving the chart as a pdf returns the same results.
At this point in the project, asking for the raw data set and regenerating the pies in Illustrator isn't an option -- and besides, I've had to do that before. Oh, the pain.
I inherited a document (yes, you heard correctly) that was designed in Adobe Illustrator (I have the CC version). This is a 10 page document with a lot of text and fake tables. Why the original author used AI for this document but now, I wish to convert this document into a more appropriate tool.
I don't know, perhaps I shouldn't be surprized that AI doesn't have much in the way of text based exports (except PDF and pure text)... PDF isn't ideal because it outputs blocks that are out of order, making it difficult to copy and paste into another editor.
Ideally, my preference is either HTML, MS Word, FrameMaker, Robohelp, CHM, or Dita. Is there a super-secret method to export an AI document into one of those formats?
I am using a Canon XA10 camcorder, when I upload the footage to my pc the files come in as .mts file format. When I import one of the clips into AE it does not come in at the correct size of 1440 X 1080.
View 1 Replies View RelatedI want to upload a picture of myself..the system says .. its too big... WHAT? how can that be... check it out.. [URL] of which I customized with Paint.NET.
I resized it to comply with the 150 x 150 size requirement ...guess what?? the system doesn't like my picture.. It not that outrageous ..as a matter of fact I think some people may like it..I also want to use it as my avatar.. then I found out that avatars can only be 120 x whatever..so I gotta resize that but not until I can figure the photo upload out....
What to do ..I did that.. system must be broke....not my fault , I just don't know where else to place this type of question.. when I saw the topic " QUESTIONS" that was my que.. why the system thinks my 150x150 pic is too big I rechecked the the size and according the Paint.NET is good to go..
How do i upload pictures a want to edit for my prop editor .
View 1 Replies View RelatedWhen I want to upload pictures into Lightroom 5.2RC the window is black and no picture is shown. This was also true for Lightroom 5. The same pictures are imported into LR 4 without any problems.
My system: 27" IMac newest generation, 16GB Ram. Uploading from a Ricoh GR, Fuji X-Pro 1, Fuji X100 directly or from a Hama cardreader USB 2 or 3.
How do I upload or export photos to the web so others can view them, I have more than several, so e-mail is not an option.
View 6 Replies View RelatedIs there or is it possible to create a plugin to directly upload a picture from within Paint.net to Twitpic, Twitter, Facebook and other kind of social network?
View 5 Replies View RelatedMade a simple type and shape design with a solid backdrop. When I tried to export via save for web to jpeg with high settings, it came up online with subtle but visible alterations. Behind my shapes are speckled like dust, it looks super low quality.
I tried using ps to save instead, I even tried removing the backdrop and remaking a whole new document and just moving select items over, then recoloring..which was not the best attempt but same result.
I'm not exactly sure what her color settings should be to avoid this. Im working at 6500 x 6500 right now. Here's a visual of the up close issue. All over its less quality. And Im saving at top jpeg settings in RGB. I really don't want to tell her she has to begin all over again.
on my website [URL] I've created the costum header and put there logo whic I created with adobe photoshop cs5.1 and when I scroll down the titles of pages down of them crosses the header text.
The logo text is in JPEG format. I've tried PNG and some other formats but doesn't work. Which format I need to do the photo to make a solid background not to be crossed by anythig?
How to change the format of the picture? When im saving the photo and sending it to my phone i cant open it up it says its the incorrect format? How to change this?
View 5 Replies View RelatedI have lots of picture tubes from an old version of PSP. I now have PSP X5. What is the correct format for the pictures? I have both psp and tub.
View 2 Replies View RelatedI am trying to view a pic that is in eps format I was told to try photoshop trial.
View 3 Replies View RelatedWhen I try to save an image and select the picture format like tiff or jpeg ps always saves the picture in the wrong format. for example I choose jpeg and in the save window the picture has the wrong format (ending). It is saved in the format which is shown in front of jpeg which is .iff? I have already deleted the preferences but the bug stays the same.
View 3 Replies View Relatedhow do i save a copy of a raw picture into jpeg format.
View 8 Replies View RelatedResolve the problem with export to PLT format? Since one day my X5 starts export objects larger than they are to PLT. Ex. text which should be 200mm wide is in PLT 250mm.
View 4 Replies View RelatedI am trialing the DG&P of xara. I am creating embroidery files in another software. I need to import in .emf. Most of my clipart, etc that I use is jpeg or png. I am wanting to take those into a program, create the vector file, and import to the embroidery software so that I can manipulate/simplify how I need to to create the stitch out. So, when I am in xara and I bring the image in, I select all and choose export in the .emf format....I figured that out. But, when I bring it into the other software I have a blank page. So, I figure I am missing something. Is there a quick way to convert the outline I bring in (in png) to vectors so that it can export and be manipulated in the other software in .emf? or do I trace the file in xara as I would in the other software, have a rough sketch, and then export? Where is the best info on what to do? I am pretty good at following tutorials and lessons but before I buy I just want to make sure it does what I am wanting it to do.
View 9 Replies View RelatedI am trying to export a .max file as .sat and it locks up Studiomax. I am new to this (.sat) format and know virtually nothing about what I'm trying to do. My client wants a .sat or step file...that's all I know.
View 9 Replies View RelatedHow do i export my 3d model to .igs format using 3ds max 2011. I used the export option to create an igs file but its giving me a file with .xlo file format. I need to import my model in ansys for analysis work but i couldnt make a igs file. The funny part is, even 3ds max cant import .xlo file after it was exported.
View 5 Replies View RelatedI am currently using Revit Architecture 2012 and am trying to export a project file in a .fbx format to start using Autodesk Showcase which I just downloaded a free trial for. For whatever reason, Revit won't let me export any file in a .fbx format. Instead of being able to click on that as an option, it's greyed out. Is there an update I need to download or an fbx plug-in I need to get to utilize the fbx exporting function??
PS: I've put myself in the 3D view which I know can be an issue of why the fbx export function is greyed out.
I have created a map using some DTED files and now I need to use it in 3ds max, so I must export it in .fbx format but I'm not able to do this, because Autocad says to me that I must convert the map in 3D object. What I have to do to export the map in .fbx format??
View 4 Replies View RelatedHow can I upload updated Pantone colours with CS2?
View 3 Replies View RelatedIn order to read and edit a picture taken in RAW format by a Nikon D7000, using Photoshop Element 8, what should I do? Any plug in that I should download?
View 1 Replies View RelatedI have a few MOV format videos that I need to rotate and re-save with PS CS6. I've never tried video editing with Photoshop, and this must be the most basic of basic starts in my next career as a film producer. I assume I just go to Image > Image Rotation as one does with image files? Then when I export the video, and select QuickTime MOV format, the resulting file does not actually have any video in it -- only audio. And despite having no video apparently, the file size is huuuge.
I have QuickTime viewer installed, but do not have a licence for QuickTime full version. Is that it?
Shall I just export to mp4 and be done with it? I would prefer to be consistent... so that I have all MOV files (I won't have to rotate / edit all video files, only some).
I have a created a video using my Sony XE105 handycam in HD and edited it successfully using X2.
I can then export it to WMV format and view the file in superb quality in windows media player. However, when I try to export into FLV format, I get the message about converting and it sits at 0%. I have left it for over a half hour without any movement before deeming it as having "hung" and trying again.
I'd really like to export movies in FLV format rather than WMV?
I have been using Xara Designer Pro 7 for almost a month now and love it so far, but I cannot seem to export graphics in the PSD format. I never had this problem with Xara DP 6. When I go to export, I have tried it both ways, as "Selected Images" and "Entire Page" and all I get is a blank image.
I would really like the PSD export to work because I design web pages in Xara and then bring them into Photoshop Elements 9 or Photoshop CS5 or Fireworks CS5 to slice them up for html pages. This worked great in Xara Designer Pro 6.
I know this probably an issue for Xara support, but I figured I would ask here first because I might get a quicker response. Maybe I can doing something wrong? Do I need to do something with layers?
I m trying to use ivy generator. It supports obj format. I created a box in max. I exported to obj format. When i go to the ivy generator then the box is different. I tried normal. But its not working.
How can i export to obj format properly?
