it is possible to justify the text of a bulleted list in the same way as for a paragraph? I can do it in Microsoft Word but I can't seem to do it in Illustrator.
When I justify the text of a paragraph in Illustrator it works perfectly fine. But when I do it for bulleted text, it gets all weird.
I want the bullet to remain with the text like it would in a MS Word bulleted list.
View 2 Replies View Relatedhow to do a bulleted list in Photoshop 6? So that the second line of text in a bullet lines up where it is supposed to without having to put extra spaces in?
View 2 Replies View RelatedTrying to get a flag note (note# in a triangle) in a bulleted list (NOTES: field at top left of drawing).
Currrently, I have created a dynamic block (triangle with the number) and it's put in front of the applicable note but it's kind of a kludge.
I would like to use the Notes: field as an MTEXT, bulleted list. Some of the notes would have bulleted number in a triangle.
Here I would like to know how to make a bulleted list nest in CorelDraw x6?
Example:
A___ The text;
B___ The text;____1_ The text;____2_ The text;
C___ Text
t is possible to create numbered/bulleted text in photoshop, with indentation as it is done in MS Word.
Just something like the text that appears to the left of the image of that house. The image displayed shows the various components of a water distribution system for a single home which collects rain water and deposits it in a storage tank. The only text that I have written in photoshop is the title and the web address.
This is for some course notes but I wanted to replace the original scanned text (which is in dark blue) for some photoshop text in black colour. But I want the text with the same indent format. Can this be done in Photoshop?
there maybe opportunity to customize the numbered/bulleted lists in Text tool in Xara Designer Pro 7?
I am not sure maybe somewhere read that it is possible
I am setting a book in Indesign CS2.I use "Text frame options" > align > justify on all my pages. On a page that was so justified, I inserted a picture using the "text wrap". Soon as I did, the text stopped being aligned along the foot of the page (which looks rotten, because the facing page is justified and so the spread is now no longer aligned.
I tried to I use "Text frame options" > align > justify again, but now the option to align is now greyed out.
how to Full justify text within a text block so that the shorter sentences (ie the last line of a paragraph) don't Force Justify?
I'm using the correct justify (full), but it is stretching out the last line as if it's a force justify.
1. ctrl shift J does not work.
2. I can bring up the paragraph window. The Justify button won't engage. If I select an area of the text with a box tool it engages to click it but nothing happens.
3. I tried cut and paste in word.
I'm trying to create a Signature for my photos. The problem is, it's difficult to come up with a signature in the lower right corner that works with both portrait and landscape orientation. What I'd like to do is, "right justify" the text in the lower right corner.
Anyone know of a way to do that?
I am using PS CS on windows XP pro. The problem I've encountered is not being able to justify text. This particular text was created by just clicking the text tool and typing. I have another type layer that was created by drawing a text box and I can justify this type all day. Am I correct in that only type layers created by first drawing a text box can be justified.
View 6 Replies View RelatedI'm trying to justify the text but i'm not able to click on the option to do so. The text i've written so far i've had to press return to get to the next line cause i guess the margins are set too wide?
how do i specify the margins and secondly, once i've done this will i be able to justify the text?
So in Action, how do I set the justify for a 3D Text object?
I've moved on... But for the life of me I can not find the option to set the justify for 3D Text. I thought I had done this before in action, but I can't find the option.
I just made an object, specifically, a rectangle with 6 units of height and 30 of long. Now I want to write text in the middle of the rectangle, I was able o find the middle point using osnap and a diagonal line (the point would be 3 units of height and 15 of long) but when I start writing text (with dtext) the text starts writing from that middle point to the right, If its a long text its not in the middle it starts in the middle :/ what can I do so the text will be exactly at the center?
View 5 Replies View RelatedI Have A Circle, Is There A Command To Insert Text Into Centre Of That Circle.
I Can Do Enclose Text But Not The Above.
I'm transferring a 1st draft book from a PDF file by copying and pasting text and photos. So far, so good.
During the pasting process, I've selected to maintain fonts and formatting. Despite this, the text gets pasted with only some of the formatting and some correct fonts. But that's easily fixable.
All the text, now in X4, is Left Justified. The author has requested that it be Full Justified (looks better). When I select a paragraph and Full Justify it, the words/lines shrink further to the left. Altering the Spacing from the default 60% to 100% allows it move to the right, but not all the way to the right of the text box.
I've tried hyphenation. Still, there's a limit to how far right the text is allowed to go.Force Justify stretches it all out fine, but the spaces are too big between the words.
I made a new text box and typed in the same content that's in a paragraph of the pasted text. It Fully Justifies perfectly!
So, there seems to be some invisible 'barrier' within the pasted text stopping the Full Justify process from working properly.
The Text options appear to be: justify to the right, justify to the left & center. How can I justify left and right?
View 2 Replies View RelatedI have some text in a paragraph frame that I want it to be in full justify but when I apply it the spaces between the words get messed up, some of them become too small and in some cases the words get so close to each other that you almost can't read the text. Also the words in the last line get also very close to each other and that ruins my design.
I have tried inceasing the kerning but this affects the space between the characters too and I don't want that. What I need is a way to correct manually the spacing between the words. I tried doing so by increasing the word spacing from the "Paragraph Formating" docker but for some reason it doesn't work at all.
I am trying to align all of the text inside of a block and have it actually align the text instead of having it keep it original position (like when you use "Justifytext" command). For example: We use blocks for fire alarm devices that we insert into drawings. When the devices are inserted they look like this (Middle left):
15CD
TBD
TBD
1/4W
I can double click each line of these texts, have the eattedit window pop up, go to "text options" tab, click the drop down menu for "Justification:" and then choose my justification(middle right); then the text will actually move to align itself with my justification, causing my text to end up like this:
15CD
..TBD (Roughly like this, only perfectly straight vertically on the right hand side)
..TBD (ignore the dots, i had to insert them for the spacing to be correct for
1/4W this example)
When I type "Justifytext", select my block, choose my justification (Middle right), just the snap point moves to that justification without the text actually moving at all, causing my text to end up like this:
15CD
TBD
TBD
1/4W
Paragraph > Justify all lines does not work - why?
View 1 Replies View RelatedI want to create an Area Type box and have all of the text line up on both the left and right sides, so I use the Justify all Lines option.
1. After doing this, is there a way to adjust the spacing of the headline? I tried adjusting the tracking, though that didn't work. Is the only way to use a separate Area Type or Point Type for the headline so it is not affected by the Justify all Lines option?
2. Is there another way to acheive what I want?
Windows 7 Enterprise 64 bit
Illustrator CC 64 bit
Within Illustrator select text tool.Type in a few lines of text with carriage return.Select all the text in the paragraph..Go to paragraph panel..Select the justify icon...NO results...the paragrpah is not justified
I am trying to use LISP to justify text using TJUST express tool. I have different layers I need to justify differently - current code causes the error "extra cdrs in dotted pair on input". Or a better way to do it???
(setq N 0 ctext nil) (repeat (sslength ss) ;
begin loop (setq ctext (entget (ssname ss N)))
(setq clayer (cdr (assoc 8 ctext)))
(cond ((= clayer "LABELS")
(setq flag "Start") );
[Code]....
AutoCAD 2010
AutoCAD LT 2013
Revit Architecture LT 2013
Is it possible to Justify an entire schedule? It appears that my schedules have an anchor point that is the upper right corner. Is it possible to change it to the upper left corner?
View 3 Replies View RelatedHad do you activate the "Justify last left" in the Paragraph dialog box in PS CS6? It grayed out.
View 2 Replies View RelatedWhy does InDesign CS5.5 not justify paragraphs via style sheets setup to do that? And when is Adobe to going to learn about what designers actually do when formatting a book? It's implausible that after all these years they still leave us with so many extra mouse clicks and time wasting searches for things that are very simple to program.
View 2 Replies View RelatedWhen i type "qleader" and go to settings and then check the "Always left justify" option under MText Options it will not save. I go open up another drawing and have to do this again. Is there anyway for it to keep the setting?
View 4 Replies View Relatedhow to Wrap the text shown here. Obviously the Column labeled "ITEM NO." would be 1, 2 , 3 etc. So I would like that column to be smaller. When I make the column smaller, the wording disappears.
View 1 Replies View Relatedusing the list command used to pop up the grapscr text box, now it does not, is there a setting for that?
View 2 Replies View Related