is it possible to create realistic 3D tooth model in Illustrator CS5?
I need something like this:
but everything i can get by using 3D extrude and bevel is this:
As you can see the biggest problem with this is the tooth root, it should be narrower than the top of the tooth.. Here is my path:
Should I do this with some other application, such as 3Ds max, blender etc.. (with which i'm not so familiar unfortunately..)
How to create a 2D drawing (standard mechanical engineering drawing) of one tooth of gear such as below image?
[URL] .......
Was just wonderin if theres anyway to create a gold tooth in my mouth on a pic i have of myself. And was also wondering how to put myself in a picture that im not really in!
View 1 Replies View RelatedAttached is a picture of a surface that a client provided. I would like to model the tooth that is shown in the pictures. I am having problems understanding how to achieve this result.
View 9 Replies View RelatedThe picture I am working with has a white spot on the tooth, I suppose from the flash that I can't seem to remove.I have photoshop cs3.
View 9 Replies View RelatedI want to draw helical gear in autocad 2010. How to draw helical gear tooth frofile in autocad.
View 6 Replies View RelatedI am printing to a Brother laser printer and a Kodak inkjet using logos in a size I have never used before. None of the content is postscript, none of it should have halftone, and none of it is bitmap-based. I have resized simple CDR and AI vector line art logos for clothing care from large size (about 4") down to 0.25" for a project I am working on. Uniform fill in black is used and some of the logos have outlines and some do not. When I print the tiny logos on the laser printer, even with a DPI or 600 or 1200, some (not all) of the lines have a noticeable saw tooth appearance under magnification, instead of smooth. Fonts that are around 5-point print with clean lines. When I print on the inkjet printer with the same DPI settings, the logos appear smooth under magnification. There may be a hint of a saw tooth, but it is barely noticeable. Font that are around 5-point print with clean lines. Perhaps I went beyond the capabilities of the laser printer, but I question that because the fonts print cleanly with much finer lines than in the logos. Note that I did notice a 45 degree halftone appearance in laser printed text with a uniform fill that was much larger than the logos, even though it is not postscript. This did not occur with the inkjet.
how I can make these logos have crisp solid lines in the tiny size I am using? I'm not printing separations. I haven't found any settings in CorelDraw X5 to fix this.
I want to make the tooth profile of spur gear specially for sugar mill roller pinion which have big teeth.
View 2 Replies View RelatedI am drawing a gear and now i need to connect points to draw involute for a gear tooth: [URL] ...
Points are numbered. I'm trying to draw with a spline, but i don't know where to put last point of a spline to draw an exact involute - like for example - if i would draw like this and press enter - i would get this spline: [URL] ...
But if i would move cursor in a different direction and then press enter - i would still get almost identical spline, but still, not the same: [URL] ...
So how do i draw an accurate involute? Maybe i should draw one more point and then stop drawing spline?
The attached file shows a gear tooth profile that I need to sweep along the lines shown. The problem is those lines are not all parallel to the UCS The tooth profile is a region.
Is there a workaround to make this happen? I used to do this all the time in 2008.
I couldn't attach the file 'cause it wss too big so I saved it as a PDF but now I can't attach that because it is not a DWG
How do I attach a PDF?
I have generated a gear set using inventor. Now I would like to 3d print the gears. I have uesd the export tooth shape to get the true tooth profile. now I am attempting to use the coil feature to generate the helical tooth. The problem im running into is in the coil tool I can only give it a Revolution and height dimension. The hight is the width of the gear, but I am having a problem converting the helix angle to the "Revolution" perameter. I have read other posts and they say that it is Helix angle / 360. I have tried that and then compared it to the original gear generated by inventor and it is not even close. I need to do this on in internal gear and match it to an external gear.
View 2 Replies View RelatedI'm trying to make a rainbow.
I'm using the line tool but when I drag to create a line the line appears but then when i click to create another line it disappears.
I can't create a new layer, I'm trying to trace an object. The "create a new layer" button is grey and doesn't do anything when I click on it...what can I do?
View 2 Replies View RelatedI am trying to create 30 name tags, what is the best way to do this? Do I use 30 art boards and paste the graphic in each, then go through and add the names to each? Or is there a way to create a template that I can apply to each, so if I were to make changes to the graphic I wouldn't have to change all 30? I'm fine with typing all 30 names just trying to eliminate some time if I have to make any changes to the graphic.
View 4 Replies View RelatedWhen trying to create a new file, I get the following prompt and AI hangs and stops opening existing files."Can't create a new illustration. Problems occurred while saving the print file. -1".
View 10 Replies View Relatedcreate a transparency?
View 5 Replies View RelatedI have created letter V using Pen Tool (two paths :). How to combine/cut/erase/ to get nice shape of end
View 9 Replies View RelatedCreation method of the arrow added newly by CS5. It is two that I do not understand.
How should AIPatternHandle of an arrow be acquired? I found AIBeautifulStrokesSuite::SetArrowheadOptions. However, there is no telling where beginSymbol and endSymbol should be acquired from.
Another is the creation method with an arrow of PathArt. I tried AIBeautifulStrokesSuite::GenerateArt. However, the divided arrow has been created in this API.
I am using CS4 on windows. I have followed all of the sugestions on this site (this is the exact effect that I am seeking!) and for the life of me none of it works.[URL] I've worked in one layer, have tried a layer for the color box and another for the text, I have tried grouping the text box with the color box as well. I figure there is a step in the inital layout that I am missing, but I'm not sure.
View 12 Replies View RelatedI am trying to create a gear in Illustrator. I have the wheel part down, but when I add the teeth and try to unite them by selecting the whole picture using the pathfinder tool the whole thing warps.
View 8 Replies View RelatedI'm using illustrator CS5 and i want to create an art brush with applying this texture in it. i zoom it in > it is consist of small squares with different colors
View 3 Replies View RelatedWhen trying to create a .ps file in Illustrator CS6, the saved file location defaults to the startup drive.
I have to navigate each time to where I would like the file saved, unlike previous versions of Illustrator which would save subsequent files to the last folder used.
In InDesign you are able to create links from one page of a document to another. They are called hyperlinks on that program. However, it seems that all the forums talking about using hyperlinks in Illustrator are speaking of using URLs to an online site. I was wondering if there was a way to create a link from one art board to the another with a clickable function.
View 1 Replies View RelatedI have been trying to create a 3D pyramid using Illustrator CC. All the tutorials I have found have been telling me I need to create a custom bevel, but the Bevels.ai file is not in the plugins folder as it used to be. How do I create a custom bevel in Illustrator CC?
View 9 Replies View RelatedI am relatively new to Illustrator.
I am trying to create a simple 3D map, but not with the default iso settings. It's actually a remake of a map made many years ago on a squar grid using a rise of 1 and a run of 2 (all done by hand on graph paper). This creates an angle that is 26.5651°.
For iso, [scale: H=100%, V=86.602%] [shear: hoizontal axis -30°] [rotate: -30°] and so on, varying for the left, right and top. I have this working fine for iso.
My problem arose when I went to the 26.5651 angle. What settings should I use for the three sides (left, right, top)?
Is there any way to get the extrude and bevel tool to do work with my settings?
I want to create a set of lines.
If, for example, I create a line which I want to duplicate, I hit Cmd + Shift + M and I select the distance, then I hit Cmd + D to duplicate. There's no problem here.
But if I want to duplicate the line progressively, in which I want to add 1 cm each time I hit Cmd + D, is it possible?
For example, I create a line, duplicate it 1 cm horizontally, and then I want the third one to be 2 cm from the second, the fourth to be 3 cm from the third, and so on.
| | | | | | | | | | | |
I can do it manually, it's just very time consuming.
How can you create barcodes in illustrator cs6 .
View 4 Replies View Relatedi am trying to create a PDF using Adobe Acrobat file from illustrator file.
Anyone know how to do it?
In between, i need the file as compress as it can.
Can you make a Pen Tool path (white), and then, by using the Brush Tool, color it in automatically ONLY within the path's designated area?
Having the ability to do this would enable me to create "digital watercolor" images with texture. I would take the white paths, and then select a color and use the Opacity Tool to make the colors look like watercolor paint by using the Brush Tool. The issue is: can I make a color texture in any path?
I often have complex vector objects which contain paths and I want to create a path around the object.
I have tried Offset Path, but this command also offset the interior of the object. I have also tried Effect>Path>Offset Path, but the original path that I selected disappears and is replaced by the new offset path. I want to keep the original path and have an offset around it. I am a long time AI CS3 user.
My problem is that I create engravings of images and I want my machine to cut an outline around the engraving, the outline being X pts bigger than the engraving.
[URL]
Where to start creating a figure similar to the attached image.
I'm trying to recreate a logo for someone who lost their original files and I'm struggling to create this little 'stick-figure'. Is CS6 the best place to try this or would I be best looking at an different software.