I am UNABLE to use the tileable blur on ANY layer! it doesn't matter what layer or what is selected, it ALWAYS errors out as: "Unable to cut or copy because the selected region is empty."
I CANNOT get the error message to stop!
I am unable to copy a layer I have selected.
View 20 Replies View RelatedOn a new transparent layer, I have drawn a straight line with the pencil tool. I select the Box Selection tool to select the whole line that I just drawn. I switch to the Move tool and made sure to move just the selection.
At this point, I would think that I would be able to move the line but only the box that is shown by the Box Selection tool moves. The line doesn't move at all. However, when I tell the Move tool to move the selected layer, the whole canvas moves, including the line. Why can't I just select just the line and move it?
I'm looking for a way to select a rectangular region, then pull it from one of the center bar points to create a rectangle with a curve.Why?
Our company has a nice graphic that it paid for, and I've got a high resolution version of it. I want to create a graphic of some of our products, and instead of having the boring looking "stamp styled logo" at the top or bottom of my graphic, I'd like to add it in as a new layer, then bend it around the image.
I recently updated Gimp on my Mac Version 10.7.5. I can't copy and paste images from the Internet. Instead, I have to save that image, open it on Gimp, select all of it, and then I can paste it onto my work document. It's a huge hassle, and I'm sure there's a way I can copy and paste images from the Internet. When I try, it just says there is no image data on the clipboard for me to paste.
View 2 Replies View RelatedI want to move and rotate a selection but PS (CS3) gives the message it can't be done because the selected area is empty. However, if I rotate or move in the background layer or a duplicate background layer the whole image changes, I also move or rotate the backgroundstuff while I only wanted to rotate the selection.
View 6 Replies View RelatedThis is based on prior work with Adobe Premiere and switching over to Smoke 2013...
since you were asking for feedback on the editor UI from Mac users...
a) is there a cut button that allows to cut a clip into two at the current marker positions? (e.g. to repeat certain elements)
b) is there an easy way to add extra frames at the beginning or the end of the clip by holding the first or last frame? (very important, but cannot find how to do this). Ideally this would just require dragging the beginning or end of the clip somehow...
c) There should be an easy option to add frames by extending the last or first frame in the case of transitions. Is there one? On Premiere, there's an option for this, makes it much faster to add transitions if there is limited movement in the source material
d) is there a way to auto stretch a clip on insert into the timeline to the selected region? time warp and frame-hold options (beginning, end, both)?
e) why is it not possible to drag clips back into the media hub on the left? (e.g. imported an AAF with a bunch of clips, now want to store some of the clips for later re-use in another timeline or part instead of having to keep it on the timeline)
f) the zooming into the timeline is cumbersome - is there a way to draw a rectangle to auto-zoom into that area? Premiere has a little scroller at the boom to select the zoom level. very useful.
g) for timeline zooming, could you support gestures on the MacBook touch pad? If you push two fingers apart, the timeline should horizontally zoom in. Two fingers together should allow to zoom out. This is actually not just for the timeline. We need this in all views in Connect FX, Action etc. Would make working so much quicker. And it's really standard Mac stuff. (Two fingers without pushing apart could enable panning? And/or space + mouse movement to pan?)
I have a GIF image that I need to add something to, but I don't want to add it to every single individual layer. Is there a way to add it over or behind the entire GIF so that it remains static while the GIF's frames cycle - like a watermark or something?
Or if not, is there maybe a script-fu that copies and merges a selected layer over every other individual layer automatically, without messing them up?
I know I'll probably have to just end up manually adding it to each layer, (so many layers...).
Using PS Elements 11 I can easily selecte (quick selection tool or smart brush tool) an area of a photo that I want to adjust, but I'm adbsolutely stymied as to how to apply the adjustment I want to that selected area??? How do I do it??? I have the area selected (e.g. I've slected a very bright sunlit area of a photo) that I want to make darker ... how do it do that?
Or I've selected an area of a photo that, after using the composition tool, has a lot of serious jagged lines, and I want to blur/smooth that area ... I've tried every conceivalbe combination (max radius etc.) of the blur filter, but nothing seems to significantly blur the selected part of the image. I would have thought that, given a "maximum" blur "setting", it would be possible to blur a selected piece of image into a uniform monotone blend ... is that not possible?
I'm unable to select the fill region. I thought it's the invisible line not checked under VV but it is.
So what's causing the fill region that can be selected and highlighted.
I successfully created multiple hatch regions in a sketch on a section view in a drawing. I want to change or delete one of the hatch regions, but am unsuccessful. I clicked on Fill/Hatch Region and then selected the region that already has a hatch defined, but the dialog box does not show that these is a hatch defined.
If I click the hatch button it creates another hatch over the top of the current one and does not allow the current one to be deleted or changed. Of the four regions in my sketch, one works and the other three do not.
why I cant sweep this region. I have tried to flip ucs move region etc.
M10x20.dwgSweep.jpg
I have an assignment. I've done all the work until i reached the end of it which is adding 2 cylinders to a weird looking object.
I'm trying to put the cylinder which shares a space between a wedge and a region but I'm unable to subtract it.
i want to create an arch&design material in max 2011, put a map in the diffuse slot, make it non tile able and on map channel 2. i want to see the map in the rendering and see the base diffuse color around where the map is.
View 2 Replies View RelatedHow can I create a tileable line pattern like the one on the image? (Illustrator CS5)
Is there a more practical way than drawing and duplicating lines? When I do that, and fill a shape with the pattern, I see gaps between tiles. Do you remember the same pattern on Microsoft Word? I want to create that, on Illustrator. Which method should I follow?
Photo editing. How do I select an area within a .jpeg image so I can blur that selected area?
View 2 Replies View RelatedHow can I copy selected blocks with new name? or one by one but in fast way? I am doing that using BEDIT but doing one by one and talks long time.
View 9 Replies View RelatedI need to know how to blur smoothly. Whenever I try It comes out really badly and the edges of the blur area look to newbish. What I want is a blur line with a smooth edge -
View 6 Replies View RelatedWhen I croped image to make a background for my web, I couldn't return back to first size - history was empty. All layers(about 30) have 192px*1px now. What I have to do?!
View 2 Replies View Relatedhow do i copy selected files to CD
View 4 Replies View RelatedBasically, every icon in the toolbox has a large empty space to the right of it. The occurs both in single window view and in modal view.
When I resize the toolbox the icons keep this right space around them, always re-positioning so that most of the icons are not included in the toolbox.
The only way I can see all the tools is to reduce the width of the toolbox to one icon, then they all line up vertically. But I have having it set up like this, and even then the last few are cut off by the bottom of the screen.
I have gone through all the settings menus and can't seem to find anything about it. I removed GIMP with the --purge option and reinstalled; this fixed it for a day, now it's right back to where it was.
Attached File(s) snapshot2.png (22.72K)
Number of downloads: 3
I was using the Gaussian Blur around letters to contrast the background and getting a very wide radius with a very gradual but complete shift in intensity from the edge of the blur to the edge of the letters. That is to say, the blur effect would extend all the way out to the Blur radius fading to nothing and the brightest part of the blur was very near the edge of the letters and not far inside the middle of a letter. That was great!!! Exactly what I wanted!
Then I went to do it again and got the default behavior:
No matter how wide I set the radius in the Gaussian Blur it is still the same width, it is just more faded. And the range of the intensity is dramatically reduced, with the brightest part of the blur far inside the edges of the letters, no matter how much I grow the Alpha to Selection of the letters. Now I am very unhappy.
I tried Reset all Filters, but the 2nd behavior is obviously the default. So how did I do that??? How did I get the 1st behavior? How did I get the Gaussian Blur to extend out so much farther without overwhelming the background? The default behavior of a Gaussian Blur of an Alpha to Selection of letters that are substantially grown is that they completely overwhelms the background and there is hardly any gradient, it is just a uniform halo with little change in intensity.
I took so many pics of her in this outfit and this is only one that was half decent but its blurry.
View 1 Replies View RelatedHow can I scale an image without the image resulting to blurry edges?
What I want to do is simply scale my image in the same way when I zoom in it. Pixelation is not a problem.
The blur tool does not seem to be working like I thought it would work. I am using version 2.8.4.
When blurring a section of a digital painting or photo, it goes to a certain point and then does not seem to blur anymore regardless of how much I keep painting over the area with the tool.
When I apply a gaussian blur filter to the entire image, I can get much more blur to occur by choosing a large blur radius.
I would think my continuous painting with the blur tool would be the same as choosing larger fill radii in the gaussian blur filter. But, as I said the tool stops blurring anymore after a few strokes over an area.
I have tried changing all the different settings - Rate=100, Opacity=100, change the size and style of brush, etc.
I have a created a workaround for the problem by doing something similar to the trick for sharpening that is mentioned in the Blur Tool documentation:
-Duplicate the image layer a few times.
-Go to the duplicate layers and apply different levels of blur.
-Choose the Clone Tool.
-Select 'Image' and 'Registered' from the Clone Tool's control window.
-Activate the Clone Tool on the layer that has the amount of blur desired.
-Switch to the original layer and begin painting the blur with Opacity set to about 60 and use brush dynamics where pressure controls opacity.
This seems to work okay. But, it is a lot of extra steps to get the blur to go further than the Blur Tool allows.
It would be nice to have a blur radius setting in the Blur Tool's control window. Could that work?
My predicament: Sharp eagle in a noisy clear blue sky. Is it possible to free select around the eagle and apply the selective gaussian blur to just the sky in one step? As it stands I am only able to blur just the sky if I select it in two less than precise sections.
View 3 Replies View RelatedI am working with Photoshop Elements 11. I have a picture that I want to place into a banner. When I do this I find that the height of the picture is fine but it is not wide enough. BUT to the leftside of the picture the background is such that I can cut it out and use it to fill the space on the left and right sides.
I know how to do selections with marquee tool etc but not how to copy and paste a selected area. Is there a tool or method that will do this for me?
I selected a square region in a new layer, filled it with a single color, then tried to apply a gaussian blur to the square selection. The preview shows an inner blur on the square, but when I press OK, nothing happens.
View 1 Replies View RelatedI've created my business card using gimp a few times. I usually us Vista Print to print it. The picture resolution is at 300 but when I get the printed image it has a little blur around the wording (that's the best way I can describe it). It's not a clear print. What do I need to do to have a more clear image to print? When I see the image on my computer it's crystal clear... I just wish it would print that way.
View 2 Replies View RelatedI resized my image from small to large. It is now 600wx300l px (for blog banner). How do I remove the blur and clear it up? Is this possible?
View 2 Replies View RelatedWhen I rotate this one and I got blur version in nd version below. How do I avoid blur ?
Check this out below:
I want this:
to this: