refer to this page here for the image.
[URL]
It is the highest to the top photo that appears to be Carlton from the fresh prince of Bel-air.
The website uses a blackish color for the background and when you roll over a comment it turns a bit brighter.
When I view the image source it shows the image being completely white with the facial lines shown.
I got very close to recreating the effect but to no success.
I saw this effect in a book about yearbook designs and thought it was amazing and took a picture in the hopes of taking it home and trying to figure out how they did it. So far, no luck. I've found some tutorials about how to make a picture look like it is made of text, but this doesn't seem that simple. Any ideas? Am I just missing something?
View 6 Replies View RelatedI found this image on an inspiration gallery, but I have seen these little swirls everywhere. How would I go about making these?
View 4 Replies View RelatedI'm looking to recreate this color toning effect in my own images but I can quite put my finger on it, I've tried almost every possible split toning combo in light room and countless numbers of curves and gradient adjustments in Photoshop and color layers with all of the blending modes, masks, everything.But I still can't get my image to look like these ones. More specifically I'm looking for those brownish-red shadows/ darks with those warmish skin tones. URL....
View 2 Replies View Relatedhow to recreate a stamp effect?
View 6 Replies View RelatedI want to recreate the Clarity effect but in Photoshop CS6.. I know I have it in Lightroom and Camera Raw, but for academic purposes I need to create the same effect but using ONLY Pohotoshop CS6...
View 2 Replies View RelatedHow would you create a text effect like there is in this image. I need to recreate this in a different design but not sure how to do the multi warp effect.
View 3 Replies View RelatedInterested in how to recreate this ceramic glaze effect in the most realistic way possible.
View 3 Replies View Relatedwhat do you prefer?
View 2 Replies View RelatedI am trying to recreate the page excerpt effect illustrated below, with jagged triangles on the border of the form.
I was going to simply make some squares, rotate them, and paste them in a line and merge them down onto the paper layer. But I figure there is probably a more effecient way to create it.
Neat Image did not transfer over fr Elements 10 to 11.
View 4 Replies View RelatedHow can we recreate the below border effect (not the center content, but the outer border)? In particular, we'd like to recreate the effect whereby the border fades out half way up the content area, and there appears to be a slight gradient which also starts at the bottom and fades out half way up?
View 4 Replies View RelatedThe edges of this fabric are semi transparent. The grey colour to the area where the arrow points is caused by the photo's original background. Now I'm wondering is it possible to recreate the transparency so that the colours from a new background will show through. I've tried colour to alpha but that makes most of the image transparent.
The rest of the image is mostly black and greys with a splash of red. I would post the entire image but it's copyrighted - DA stock model - so I don't want to break the rules.
I'm running Gimp 2.8.4 on Ubuntu 13.04 Linux (64-bit) and I'm trying touse the "Bevel and Emboss" layer effect on an image which I copied fromanother image. Here is what I've done:
1. Loaded image 'A' into Gimp
2. Selected a portion of it
3. Used "/Edit/Copy" to copy the selection
4. Used "/Edit/Paste As/New image" to create a new image from the selection
5. In the new window for the new image, "/FX-Foundry/Layer effects/Bevel and Emboss"
6. When the "Bevel and Emboss" window opens, I accept the defaults and click "Ok"
The filter starts to run and then stops with an error message. Here is the message I get:
------------ START ------------------
Bevel and Emboss Message
Error while executing script-fu-layer-effects-bevel-and-emboss:
Error: ( : 1) Procedure execution of gimp-selection-layer-alpha failed on invalid input arguments: Item 'Pasted Layer copy' (87) cannot be used because it has not been added to an image
----------- END -------------------
I would like to re-create the effects used in this image. Would it be possible to create this in Photoshop or do I need 3D modeling software?
I have been trying but I can't seem to get my shapes to look that three-dimensional. Also, how do I get these types of effects with color and texture? The color effect that is used in the triangle I would especially like to replicate.
How to give your image an HD effect? I searched the web and came across a youtube video:
[URL].....
I tried this method on my newest image I made a couple days ago...and this is the result. (In Order Before and After.)
I'm looking to recreate the filter on the background image (stadium) from the image below. It is creating a light blue hue, but still maintaining certain colors in the picture, like the green turf.
View 2 Replies View RelatedI am trying to figure out how to make an image, for example, an animal image, have a cartoonish effect to it. The cartoon option in Gimp does not do what I wanted it to do so there is probably something else I am missing. Here is an example.
[URL] ...
The fur on the wolf does not have a realistic look to it. How do I make an image have this effect?
I would like to learn how to apply the shine/reflection effect which is on the top corner of this image.: [URL] .......
View 4 Replies View RelatedI want to create an effect on my image where the image is ripped from behind and the ripped pieces are turned to the front like the power that ripped the material came from behind.
An example would be AC/DC Razors Edge album cover.
I found some tutorials but they are just for ripped paper. I want to be able to turn those ripped edges anywhere I want like real paper or some other material in real life.
How do I get this effect?
[URL]
Basically I have 2 images, 1 is a texture background and the other is a face. I wanna create the effect that the face is blended into the photo just like in this one:
[URL]........
Take a look at the following site:
[URL]
For the background image halfway down, there's a totem pole sort of "merged" in with the color. But it's not simply an overlay blend mode or opacity change. It has essentially seemed to adopt an entire palette based on the background color itself.
I think I recall a way to create this effect in Photoshop, but in GIMP I'm stuck. How would one go about making that "color overlay", given any regular picture and a colored background? I'm doing this for a website, by the way.
I am currently working on a texture for a turtle that will be used on a model in 3ds Max. I am a moderate to expert level user of Photoshop, in my own opinion, but still have much to learn.
My question today is this. Is there a way to create an image and then use the brush to recreate it randomly over and over again on a canvas? This question is in regards to the scales I am making for the turtle texture. The brush has a whole slew of tools for changing the size, orientation, and scattering of the brush so I was wondering if it is possible to use my scale image with it somehow?
I have attempted to use the pattern stamp tool but it spaces them so far apart and there is no control like you get with the brush tool.
How did they do this background and how did they incorporate the logo in the corner so well?
View 6 Replies View RelatedI have been looking into polishing up some of my macro stuff by properly reacting to document settings and such and prettied something that was built for everyday use. It's a simple little tag adding tool:
To try it out just download the attached zip and extract the GMS file into: C:UsersYOUR USERNAMEAPPDATARoamingCorelCorelDRAW Graphics Suite X6DrawGMS
Then in CD go to Tools ==> Macros ==> Macro manager and launch the Show Form bit. If you have a document open and a shape selected it should work just fine.
I just started using photoshop again. I haven't used it properly since art classes a few years back and i've forgotten bits and pieces.
i could never make picture in this style of the attached one below quickly and whatever technique i had before i've forgotten so i want to know if anyone has a quick technique of turning normal pictures into this wicked pop-art flash style. I can tell it should be easy but extracting the layers of colour seems to be the hardest.
If I bring a raster image into Illustrator (CS5.5) and apply an Effect (Angled brush stroke) will the resulting image be a vector or raster?
View 4 Replies View RelatedI usually do mock in FrontPage as I can do it quicky and easily. I know you guys are yelling loud, why not in PS.. I am in the process of learning and once I have he mastery I promise PS will be my primary tool for even typing a document
I have attached an image, primarily with transparent layers and gradient. Please give me a step my step of how to achieve the same effects.
I frequently find myself recreating gradients created in illustrator using Photoshop. however, even when using the exact settings for color, opacity, and location, they never come out the same. is there some rule of thumb or some logic as to how those two applications create gradients and how to better approximate them?
View 5 Replies View RelatedRecreate my logo icon. I lost my original pst and only have the icon that I crop out of png logo. Basically I need to enlarge it to 1024x1024 and when its over the dark background, it has a lite uneven border.
Also here is my current logo.