GIMP :: Language Setting Windows 7 And 2.6 (2011)

Jul 12, 2010

I got a mail from a German in Saudia Arabia. He runs Windows 7 withEnglish as default language. He installed GIMP 2.6.9 and it comes upin Arabic which he can't read.

He sent me a screen shot which shows the menus of his mail program inthe back behind the Arabic GIMP. They are in German, but he says hissystem is running in English. Localisation Hell?

View 6 Replies


ADVERTISEMENT

GIMP :: Photoshop Brush Flow Corresponding Setting (2011)

Dec 16, 2011

I am reading some drawing tutorials for Photoshop and they talk about a setting of the brush called "flow". Is there a corresponding setting in GIMP and where it is?

Edit: After some additional searching I found that the option is called "incremental", but I also found that it doesn't work as described in the docs - it is not limited to the opacity set for the tool.

I am using GIMP 2.6.11 on Gentoo Linux

View 2 Replies View Related

Revit :: Changing Language Setting From German To English

Nov 3, 2011

I followed the instructions in the below link where I changed the Langue settings manually in Notepad.

[URL].....

But when I open Revit after this change, I get an error message and says the licence I have in not valid and I can only use the software as a trial version.  When I change back the language setting to German, this problem goes away. 
 
Is there another way to change the language setting for Revit?

View 1 Replies View Related

AutoCAD Civil 3D :: 2011 Section View Setting

Jun 13, 2012

I am just starting out in Civil 3D and we are using the 2011 version.  Anyway I have created cross sections along the centerline of a profile.  How do I get the elevations and offsets to show up without digits to the right of the decimal, in other words to the nearest foot (ie. 3820.00 = 3820, 50.00 = 50)? 

View 1 Replies View Related

GIMP :: How To Change Language 2.8.6

Oct 16, 2013

I just find GIMP2.8.6 and very interested in it.I just want to make it work in Japanese. I did try below things but still don't get success.

OS:Win7 64bit, English OS.(I added keybord so I can type Japanese too)
GIMP ver 2.8.6

I first uninstalled GIMP. I added variable "LANG" and value"ja" in envaromental variables for user variables and also system variables and re-start computer and re-install GIMP2.8.6. GIMP is still in English.

Again, I uninstalled GIMP.I had both English and Japanese in keyboard in Region and language setting in control panel. so I removed English key board. so now it has Japanese keyboard as default input language. Japanese(japan)-Microsoft IME.I restart computer and reinstall GIMP2.8.6. It's still in English.

Even I look preferance-Interface and language setting, there's only "System Language" or English[en_US] can be selected. no Japanese.Doesn't GIMP 2.8.6 show menus in Japanese?

View 3 Replies View Related

GIMP :: How To Change Language

Aug 31, 2012

1 - Whenever I start GIMP I get the following Problem Report: "file-pdf-load cannot be opened because of a problem." (Note that GIMP itself loads and runs, it's just this plugin "/Applications/GIMP.app/Contents/Resources/lib/gimp/2.0/plug-ins/file-pdf-load" that fails.)

2 - How do you change the language? The release notes say: "A question that often arises is how to change the UI language in GIMP, which has traditionally been a bit cumbersome. Not any longer, it is now possible to change the language in Preferences." But, I don't find that option anywhere in the Preferences of 2.8.2.

3 - How do I install the Help files for 2.8.2 on the Mac. I have searched and searched and find nothing.

View 7 Replies View Related

AutoCAD LT :: 2011 Won't Install On Windows 7?

Nov 28, 2011

When I try to install on my new computer I just keep getting a dialogue box that says "You cannot install this product on the current operating system".  I purchassed Autocad in about January 2011 and have a valid licence.  The setup program gives me no other options. I just downloaded the program files rather than buy a hard copy. 

View 8 Replies View Related

AutoCAD Civil 3D :: Using MS Windows DFS With 2011?

May 15, 2012

We are geographically spread out and need to come up with a way to have all Civil 3D files locally available to each office. There is a way to replicate the files to every office. Has tried DFS?

View 1 Replies View Related

3ds Max :: Windows Don't Work Properly In 2011

Jul 3, 2011

I 'm trying to create a window from the command panel( for example fixed) and firstly I can't create the width unless I go to modify nor can I add rails and panels.

View 2 Replies View Related

AutoCAD 2010 :: 2011 Crash On Windows 7?

Sep 12, 2012

i have atocad 2011 installed on my computer (64 bit), a HP Pavilion p6370nl desktop pc, and also have a new videocart: nvidea gt 640, but if start atocad, it starts, and close then. what to do? i already have reinstalled it and also repaired it so...

View 9 Replies View Related

AutoCAD Inventor :: Install And Use 2011 On Windows 8.1?

Oct 31, 2013

i am very desappointed that it is not possible  to install inventor suite 2011 on windows 8.1.

I have made the update of windows 8 and inventor does'nt not start, even with acomplet  new install.

in my school, whe have inventor 2011 and the new students can't install inventor 2011 on their new pc.

the school don't change the version of inventor while the pc will not change (win xp and 32 bits, not good for inventor 2014).

View 5 Replies View Related

3ds Max :: 2011- Slow Save Files In Windows 7

Apr 19, 2011

I just recently upgraded from WinXP64 to Windows 7 Ultimate 64 and everything is good… aside from the fact that everytime I save the files, it is realy slow

I never had this issue before (although when I think about it, I used to work on another Win7 station a few months ago and I had the same issue)

I think the reason is OS related as everytime I click on save, it “re-creates” the file from scratch… This is not much of a problem on small files… but I have scenes that are over 500MB each and it takes forever to save everytime (not that the scene unreliability is not enough!!!)

View 4 Replies View Related

GIMP :: Type Language Special Characters?

Feb 7, 2013

I want to type in gimp(using text tool) with some special characters from my native language like(ā, ē, č, ķ, ģ). If i try to do it in gimp I get á, é, ć, ḱ, ǵ. Are there some settings or plugins that allow me to type these non-English characters like I do it usually.

View 5 Replies View Related

AutoCAD LT :: Mouse Lag When Drawing Lines In 2011 / Windows 8

Feb 22, 2013

Just got my new work PC and I'm having issues drawing lines in AutoCAD LT 2011.

Much like other people, circles are fine, as is most everything else.  It's just the lines (and who uses lines when drawing things?).  So, as you can imagine, my frustration level is to the point where my head is about to explode.

Here are my PC Specs:

Windows 8
Intel Core i7-3770 3.40GHz - 8 CPUS
Memory - 16GB Ram
AMD Radeon HD 7770
2GB GDDR5 Memory

And this is coming from an old Dell that ran 2011 like a champ, the computer just got old and died.

I can't see any reason, component wise, why the CPU can't handle it, and, since it's just on lines, it leads me to believe it's a software issue where 2011 LT isn't playing nicely with Windows 8 or some other component.

Could it be that it's just time to get with the times and upgrade or is there some workaround?

View 7 Replies View Related

GIMP :: Type A Text In Greek Language On Photo

Jan 28, 2013

while trying to type a text in Greek language on a photo. I have to tell you that i have done in the past many times this job (type Greek letters on a photo for watermarks etc) with the same program and the same computer until two days ago!

I checked the input method, i resetted the values inside the options from gimp preferences , i uninstalled the program twice and reinstalled it, i removed all the app Data for the specific software but still doesn't work. When i try to type Greek letters , i get strange symbols that i cannot paste here! It pastes normally the characters that i wrote on. I use gimp 2.8.3 and my OS is Mac OS Lion 10.7.4

View 2 Replies View Related

AutoCAD 2010 :: 2011 Windows 7 64 Bit Fails After Update Of MS Dotnet 4

Mar 5, 2012

I updated a working cad station with the lastest pathes. It loaded the new MS Dot Net framework 4. Now Acad crashes if you open it, see below. If you click on an existing drawing it opens and you can work with no problems.

My question is - Is Acad 2011 compatable with the new DotNet 4? The fault module below is DotNet. The old drawings were created using 3.51 DotNet so it looks to me it tries to use the dot net 4 on new drawing.

Problem signature:
Problem Event Name:                        APPCRASH
Application Name:                             acad.exe
Application Version:                           24.1.208.0
Application Timestamp:                     4dbf9c16
[code]...

View 9 Replies View Related

AutoCad 2D :: LT 2011 On Windows Vista - Hatching Makes PC Hang

Jul 13, 2012

I have a serious problem when hatching in AutoCAD LT 2011, it's making my PC hang but only when I'm using the 'Add: Pick points' command. It's so bad that I can't even call up the task manager to stop the process and I have to switch it off and on again to get it working.

I've never encountered this before with earlier versions of AutoCAD, is there a way around this? It's driving me nuts!

I'm using AutoCAD LT 2011 on Windows Vista.

Since opening my most recent backup file I think I may have found the cause.

I had inserted a .jpg image (150 x 150 @ 8KB) that I was using to trace around it and it was these tracings that I tried to hatch. I have since deleted the image and now the hatching causes no problems.

View 9 Replies View Related

AutoCAD Map 3D :: Setting To Ensure That Hatch Windows Comes Up?

Mar 6, 2012

I've just tried making a hatch, and notice that it no longer calls up the window that it used to call up in the older versions-- 2009 and earlier, for me.Is there a setting that I can set to ensure that the hatch window comes up?

I rarely use the default type/pattern name and scale settings, and I prefer to select my boundaries, instead of selecting a point within an area.

View 3 Replies View Related

GIMP :: 2.6.11 - Cannot Edit Text (2011)

Mar 21, 2011

I am using Gimp version 2.6.11 under Mac OS X version 10.4.11.

I am having a problem that is driving me to distraction: When I close a file and open it again, it is impossible to edit the text. Please note that before saving the file, I have no problems editing the text--so I have already passed hurdle.

It wouldn't be so bad if it was just a word or two, but I am in a situation where I will have to delete several paragraphs of text and re-type them in order to fix a small typo. With my typing skills, it is likely that I will make another typo in the process. And, of course, I don't remember what font I was using, or the type size, etc. etc.

View 2 Replies View Related

GIMP :: How To Change Image Background (2011)

Sep 3, 2011

I have upgraded from centos 5.6 to centos 6.0 to have all of thefeatures of GIMP. How can I change my imagebackground by using GIMP ?

View 3 Replies View Related

GIMP :: Text Won't Enlarge Past 30 PX (2011)

Feb 27, 2011

I am a new Gimp user and have just started working on my first project with this application. Unfortunately, I ran into a roadblock almost immediately. I am unable to make text any larger than 30 PX. I can enter larger sizes than this in the Text Tool window, but any value greater than 30 has no effect. It doesn't matter whether I am trying to change existing text or am setting up the Text Tool for entering some new text. Selecting different units for the text size makes no difference in the maximum text size.

Gimp 2.6.11
Mac OS 10.4.11

View 2 Replies View Related

GIMP :: Tool Options Box Hidden (2011)

Jan 29, 2011

My 'Tool Options' Box has always been on the left of the screen - at the bottom of the 'Tool box'. I clicked on something yesterday while using the Tool Options Box and somehow moved it. There is now a message there that says 'You can drop dockable dialogs here'. I've tried various things but can't get the Tool Options box back. It's lurking underneath the main Tool Box. I can drag it out and use it, but afterwards it hides again. I know this has to be a dead simple problem but I just can't seem to correct it.

View 2 Replies View Related

GIMP :: 2.7 Does Not Detect Input Devices (2011)

Dec 14, 2011

The problem occurs since the GIMP requires GTK+ version >= 2.24.7 (Around November 25).

Currently I have to date the latest versions from Git of babl, gegl and GIMP. Gtk +-2.24.8, glib-2.31.2, pango-1.29.5.In Edit > Preferences > Input Devices > Configure Extended Input Devices only shows "Core Pointer". Do not show my mouse or my Genius tablet, which before the version I had mentioned they appeared and everything worked.

In Gimp 2.6 everything works tooI tried deleting the ~/.Gimp-2.7/ folder but the new generated "device.rc" file only shows "Core Pointer".My distribution is Kubuntu Oneiric 11.10 64bit.xserver-common, xserver-xorg-core = 1.10.4

View 3 Replies View Related

GIMP :: How To Apply A Stepping Curve (2011)

Mar 16, 2011

When I create a curve to apply to an image, GIMP gives me only two choices: a freehand curve and a smooth curve. I need to apply a stepping curve (piecewise flat) and I am out of luck because there is no such option.

View 12 Replies View Related

GIMP :: Use Of Lens Distortion Filter? (2011)

Apr 3, 2011

I need to correct distortion from my 18-200 mm lens for my Nikon D80.

I can experiment with the controls until I get what looks reasonable,but it would be easier if I could find recommendations for settings of the lens distortion filter at different focal lengths for the lens.

I used to use a Panorama Tools plugin for gimp for which I found such recommendations, but I can't get that plugin to work with recent versions of gimp.

Of course I can experiment by photographing a grid at different focal lengths and different subject distances and using trial and error, and create my own tables.

Finally, where can I find a description of the the algorithm that the filter uses. If I had that, it might simplify things. Usually these algorithms apply a polynomial (usually cubic) correction based on the radial distance from the center of the image. The parameters set the coefficients of the polynomial.

View 1 Replies View Related

GIMP :: How To Save Image As Displayed In 2.6 (2011)

Jun 24, 2011

I've got a white UI button with 3D shading and transparency. The white button looks great. I want a red button, so I turned off the green and blue channels (and left on the red and alpha channels). The red button looks great.

A red button is being displayed under GIMP. When I save the red button as a PNG, the button saves as white rather than red. How to save/export to file using GIMP 2.6?

View 4 Replies View Related

GIMP :: UFRaw Default Settings (2011)

Jul 15, 2011

I'm using the UFRaw plugin to GIMP for importing RAW images. However, if I do any adjustments for a particular image, UFRaw will save that as default when I import the image to GIMP.

is there a way to turn it off?

View 5 Replies View Related

GIMP :: Using Lens Distortion Filter (2011)

Apr 18, 2011

There used to be a pnorama tools plugin which allowed one to entercorrections for specific lenses which I was able to find on the web.That worked very well. But I haven't been able to find that plugin forrecent versions of gimp.

There is a lens distortion filter, but you have to use it by trial anderror. I haven't found any specific recommendations to use forspecific lenses anywhere. And in some cases, nothing I try works. Iattach an example below. It was taken, I believe with a Nikon 18-55 mmlens at 18 mm. You will notice that there is no distortion at thesides but significant barrel distortion as you move in from the sides.No combination of major and edge correction that I've tried does anygood.

P.S. I understand that ahd I shot raw with my Nikon, I might havebeen able to do the correction more easily using ufraw. Also, it mightbe possible using hugin to correct the distortion. But I would like tobe able to do it with gimp if I can.

View 4 Replies View Related

GIMP :: Changing A Text Layer (2011)?

May 11, 2011

I'm having trouble accessing text layers in a logo I am trying to make.

Each time I create text, it gets put into its own layer; that seems to be the way GIMP does things. I'm fine with that. However, once I've completed making a text layer and moved on to creating a second text layer, I can't seem to get back to the first text layer to make changes, such as the colour of the text or the size of the font.

The window for the graphic indicates that there are several layers but I can seem to get back to any previous layer. I don't see any menu options for accessing one of the other layers. PageUp and PageDown don't show me the different layers. It's as if the layer's content, colour, font, etc. can't be changed once I've started a new layer.

How do I access the layers that I created before the current layer?

I am using GIMP 2.6.11 and running on Windows XP Pro with Service Pack 2.

View 5 Replies View Related

GIMP :: Maximize Display Window To Fit The Image - 2.6.11 (2011)

Jul 7, 2011

I used to be able to maximize a display window and then make the image fit the window and finally shrink the window to fit the image. This seems to have changed recently. What are the equivalent keystrokes to accomplish fitting the image to the window and then shrinking the window to the image?

View 1 Replies View Related

GIMP :: Bold Versions Of Some Fonts Fail (2011)

Feb 21, 2011

At some point - I'm not clear when - something changed with my fonts(Linux - Slackware64 13.1). Now I cannot select, for example, the boldor italic version of DejaVu Sans. The appear as Regular.

- I tried to install the newest package for the dejavu fonts,

- ran mkfontscale

- ran mkfontdir

- Though probably unnecessary, ran fc-cache

First tried to 'reload fonts' (button in fonts dialog) in Gimp, thentried to restart gimp entirely. (and from a terminal to check for anymessages with --verbose).

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved