That's the gif. In the upper right is the white corner I need to get rid of. It shows in every frame of the gif
I don't know where to begin. I've tried selecting it, and making it transparent, but that doesn't seem to have any affect, so I think it might be deep-set into the image in some way. It's not just white paint on top of the layer.
Right after one makes a selection, say by using the Rectangle SelectTool, is presented with handles that allow altering the selection.
If one then selects another tool without deselecting is being deprivedof these handles while the selection remains active thus rendering himunable to alter the selection in that fashion.
Thus forming my question: is there a way to make these handles to(re-)appear on a non-freshly created selection?
I know how to blend selection edges of a selection in Gimp 2.8.2, but if I have only one side of a selection that needs blending, what should I do?
Lets say that I have a grey box on a black background and only want to blend the left vertical edge into the background.
Every time I make the second selection in a picture with the lazo the first selection disappear. what can I do to fix it?
View 8 Replies View RelatedHow do I outline a picture or shape with a path and make that path have a transparent background?
View 2 Replies View RelatedI just downloaded paint.net, it looks like it will be a big upgrade from PC Paint, which I currently use. There's one important feature in PC Paint that I can't seem to locate, though: declaring the background of a selected area to be transparent. In sequence, it looks like this:
I use this function quite a bit, and I figure if it's in PC Paint, that it would certainly be in paint.net - I just can't find the spot.
I open a jpg image in PS, use a quick selection tool to select what I want and then I'd like to make that selection 80% transparent. How do I do that?
View 3 Replies View RelatedWhat I want to do is make a row of five small thumbnail images that blend into each other. I've got them on five separate layers, and I just want to be able to select the edges of the pictures and create a horizontal gradient that makes the very outer edge almost 100% transparent, and the inner edge of my selection 100% opaque.
View 1 Replies View RelatedI'm trying to make an image with 2 layers: one is a circle that I'm using as a background (and everything outside the circle is transparent) and the other is a selection that I've copied that I want to paste over the background. Is there a way to make it such that the selection I'm pasting will only cover the background image and if any parts of the selection that I'm pasting go outside the background image into the transparent parts of the image that the transparent section will remain transparent?
I've been doing it an ad hoc way of just erasing parts of the layer that I'm using to paste and checking for transparency underneath but that's pretty time consuming. I assume there's a better way?
Also, vice versa: is there a way so that if I have a selection that has transparent sections that I paste over a background, that the selection I'm pasting will have it's transparent sections not overwrite none transparent sections of the background? I mean, outside of using magic wand to select everything except the transparent sections and just pasting the parts I selected using magic wand over.
When I have a backgound selected with the Magic Wand Tool or the Quick Selection Tool and I try to delete it, instead of getting the white and gray checkered background, it brings up a "Fill" splash screen, why? I'm just trying to make an image transparent so it can be moved from one image to another.
View 1 Replies View RelatedI'd like to take a transparent PNG and turn it into Art like in this picture... how would I go about doing so?
View 3 Replies View RelatedLet's say I open a jpg and I want it to be transparent when I erase. Can I do it without exporting as a png and then loading it??
View 4 Replies View RelatedI need a script that can do this: [URL]
Also, How do I get the background to always be transparent?
I made a selection, I did what i needed to do with it but... how do I get rid of the selection now?
View 2 Replies View RelatedI tried to get into the IRC to ask this question but I kept getting a 404 message. My question is....is "filling with transparent" the same as "tinting"? (explanation: In the image editor that Photobucket used to have I could change the color of something in a picture without losing the original shading, etc. They no longer have that image editor so I am looking for an Open Source program that is easy to use and has that feature.)
View 4 Replies View RelatedI have followed about a dozen tutorials on how to make a background transparent and it seems as though I am doing everything right but... When I go to import my new image to PrintMaster it gives me a warning that the transparency may turn black. It does darken the transparency and has a noticable rectangle around the image that should have a transparent background. I have tried exporting the image in every form possible and nothing seems to work.
View 1 Replies View RelatedI created a transparent digital signature png from a scanned original handwritten signature. It works fine for adding a signature to pdf documents with a white background.
For those times when the background is other shading/pattern, say a 'grayscale' looking shading/pattern...I want to 'adapt' the background of the signature.png to that of the pdf.
So in practice open the pdf, select an area that has different shading/pattern up to the clipboard, and make the background of the signature the same as that in clipboard; with hopes the background will 'blend' into the pdf.
I got an irregular shaped image and I wish to get rid of the white canvas background underneath it.
I used lasso to outline the image.
However, when I right click, the lasso will not disappear.
I want my mouse to come back.
the steps to make the background transparent
I have seen several instructions on how to fade a picture to transparent. How I can fade a picture to the exact color of the background, i.e. the edge of the picture disappears and smoothly transitions into the background color? All fading I have tried sofar still leaves an edge of the picture visible, contrasting with the background.
View 4 Replies View Relatedremoving a transparent watermark that I found on some scans.
The transparent watermark is located on the lower left corner, there's also a small watermark on the lower right corner.
I'd like to know how to remove these watermarksAttached File(s) Jewel Case - Front.jpg (140.38K)
Number of downloads: 27 Disc.jpg (84.23K)
Number of downloads: 13
I have spent some time trying, in PaintShop Pro 7, to create an image with a transparent background to use as a layer over an underlying jpg.
I have now done it in Gimp, and tried it over another image in Gimp - it works. But when I export the image either as a GIF or as a JPG there is no transparency when I paste it over another image in PaintShop Pro.
Perhaps it would be easier to do the whole thing in Gimp, but it would be convenient to be able to do it in PSP too.
i have been trying to import an image (png) with a transparent background into blender as a plane. all gos well until i unselect the plane then there is a blackish gradded border around the image. the image works fine in all other applications just not with blender. i have fooled with all the settings i can with gimp but i'm stuck.
View 3 Replies View Relatedwhen I use the brushes, I get different shapes in solid white colour , I want to make the colour more transparent, how to do it?
View 6 Replies View RelatedI have scanned in some red coloured Chinese characters. They were on white paper. Now I want to make the 'white' disappear, because it ist not quite white, and when I print I get a shadowy block around the characters. If I save a .png, can I tell it to make white invisible, transparent?
View 3 Replies View RelatedI am kind of new but can paste , copy things .
I am trying to add some text onto a semi-transparent box , onto a Gif .
Using a script called - animstack - I managed to get the text in all the 180 layers but without the semi-transparent box .
Animstack is a script/app which automates due processes.
how to work with Animstack. I also have GAP installed.
Using Gimp 2.8 portable.
I wanted to create transparent icon.i created it and i can see black&ash rectangles around the image, this confirm that as a transparent image.But after exporting it to jpg or png White color background is coming when i see it in photo viewer.
How to avoid that white background, am i doing a correct method?
I want to generate a transparent embossed text watermark .png file that can be batch-applied in Lightroom. I get how to apply a bump map to an image inside GIMP, but I haven't figured a good way to get an otherwise transparent .png with just the watermark.
Ideally, this would be totally transparent except for lit areas (white, at varying degrees of opacity) and shaded areas (black, with varying degrees of opacity). In GIMP, I can apply a bump map to anything opaque -- lightening and darkening the color, I guess -- but I can't apply it to a transparent layer.
If there's no straightforward way to do that, I imagine I could bump map onto gray, turn the resulting light grays into a mask for a white layer and the dark grays into a mask for a black layer. The content of the watermark will change, so it would be outstanding if there's a simpler way to do this.
i want to be able to use the fussy select tool to remove the Background of a picture so i can paste it over another picture, but whenever i delete the background it doesent become transparent, only into the colour ive recently used
View 8 Replies View RelatedI have an image that I want to paste a question mark over. I found this clipart question mark. I would like to fill in the regions of the symbol with grey translucent color.
View 6 Replies View RelatedI have an image I want to cut the white space out of and make it transparent. I can use the magic wand tool to highlight everything I want to remove, but when I hit delete on my keyboard nothing happens.
It's originally a JPG image with a white background that I am pasting into GIMP.
I attempted to magic wand what I wanted to keep and then to copy/paste it to a new document, but the image is too intense to highlight it, it is much easier to just highlight the whitespace surrounding it.
I need to make the background transparent, so as usual, I used the fuzzy tool and then, tried to cut the background out, but it actually cuts out more parts then I need it to(it cuts out other parts with similar colours), so is there a way that I can pick a colour specifically and then cut the part with that colour out?
View 7 Replies View Related