CorelDRAW X6 :: Paragraph Text Crashes Each Time When Try To Save A Change?
Apr 10, 2013
Starting yesterday, I copy/paste text from Word to x6 paragraph text box, save, all fine. But when I attempt to edit that text box, entire program crashes each time I try to save a change.
Sometimes I can make a single change -- add a return -- and save before crash. This is a nightmare. I've relied on Corel for years and suddenly a 5 minute job has become impossible to complete after a day and a half of frustration.
I'm using Win7. This problem started at about the time I added a logitech c920 webcam. The logitech software won't work at all with my system. Logitech says the wacom tablet is the problem.
I've uninstalled the logitech AND restored my system to pre-webcam condition (so they say) but the Corel text bug persists.
View 16 Replies
ADVERTISEMENT
Apr 2, 2013
I just installed CorelDRAW X6 on a new 64bit Win-7 machine. When I try to use keyboard shortcuts to cut and paste paragraph text in a document I created with X5 on my old 32bit Win-XP machine, CorelDRAW crashes. I need to be able to work with my old X5 (and occasionally, older) files. Is there a fix for this, or do I need to go scrap X6, and put X5 on my new machine?
View 8 Replies
View Related
Sep 4, 2013
I converted a DXF file to a Corel Designer file. This DXF file also has some dimensions which turned into paragraph text. This paragraph text is turned by 90 degrees. The font size is rather small, so I increased it by some points. As the paragraph text frames were now too small, I tried to increase their size. However, the text frames always jump back to their original size.
I experimented a little bit and noticed that this is only, if the text is turned by 90 or 270 degrees. If the text frame is not turned or turned by 180 degrees, you can change the size of the text frame. Additionally this problem arises only, if the option "Expand and shrink paragraph text frames to fit text" is activated (in Tools | Options | Workspace | Text). Sometimes some text frames were adapted automatically, when I changed this option. However, I do not know when which text frame was changed.
Corel Designer X6, service pack 1
View 2 Replies
View Related
Feb 1, 2013
I have designed a C# application to To Print I Cards Of School. Here I am sending data from my application to a CDR FILE (Already Created ) Which Contains ADDRESS Text Field..Now I Need to Print Address(which contains 60 characters or more) on this Text field .
I Have Used The following c# Code.. To Replace Address text field that contains text 'Address '.....
s.Text.Replace('Address',"Text To be replaced .......")...here s is Active shape...
This Works Fine But How can i WRAP TEXT....of Address field.
View 2 Replies
View Related
Apr 27, 2011
I'm perfectly happy with the TrueType font (BankGothic Md BT), but all the style settings change to the T1 equivalent every time I close, and when I open the file again the T1 text does not show up. I can go through and reset all the styles, then re-apply them, but it wastes a lot of time.
View 1 Replies
View Related
Nov 12, 2013
Corel photopaint crashes each time you try to save an image with W 8.1
View 2 Replies
View Related
Sep 18, 2013
Illustrator CC keeps crashing every time I try to save a file. My Creative Cloud is up to date, and I have a brand new iMac with 8GB Ram and the latest operating system. The average file size I've been working with is around 4MB, so not very big. I also make sure that I have as few programs opened as possible while I'm working in AI.
I've been talking to Apple Care every week, and even went back to the store to change my computer for a new one, but am still having problems.
View 6 Replies
View Related
Jul 29, 2011
I removed text from a rectangle and that message keep displaying in that rectangle.
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
View 4 Replies
View Related
Oct 30, 2012
Is it possible to get paragraph text Headline (Title) & body text applied by style at one click without selecting each separately. If yes, how we can do? If not possible, will it be possible in update or next ver. 7
View 1 Replies
View Related
Apr 28, 2011
how to curve text within a shape, as paragraph text, not artistic text? (See my attached image.)
I have drawn the shape, inserted the text as paragraph text, but the text always wants to sit straight. I am so frustrated as I can find a workaround in either Corel or Adobe CS products. I have tried using artistic text in Corel, but have to do it line by line - and this brings other problems, such as I cant justify each line with each other, and sometimes a character jumps up relative to the other characters and the entire paragraph does not taper in...so this is not a solution, apart from the fact it will take me FOREVER to insert line by line....I would like to treat the text as a multiple line paragraph, and follow the shape.
View 14 Replies
View Related
Jun 4, 2012
In the last 2 days Corel has decided to start changing Artistic Text to Paragraph Text when I copy & paste it across documents, completely changing the font, size & colour of what I am copying.
I've just done a factory reset & it's still doing it.
I don't recall doing anything that would change a setting.
The text I am copy & pasting are disclaimers that are all set on 1 document & I copy & paste them to a proof as needed.
View 4 Replies
View Related
Aug 20, 2012
When I copy properties from one paragraph frame to another, only font and its size is copied, not paragraph settings (spacing before/after paragraph, bullets, indentation etc.). I never had problems with this - it started a couple of days ago (the update??).
View 2 Replies
View Related
Mar 28, 2012
I've been using CorelDraw X3 for a while now and whenever I have copied and pasted artistic text is has simply pasted over itself in the same place for me to move wherever I want to.
Yesterday I copied some artistic text and when I hit paste it pasted as paragraph text, in a different size and font and in the center of the page. Have I accidentally and unawares changed a setting?I know I can get around this by duplicating instead of pasting but it is frustrating as it is a feature I use constantly.
View 4 Replies
View Related
Jan 18, 2013
I am taking a pdf file into coreldraw home & student X6 to edit and change layout from landscape to portrait. When it opens the paragraphs are either objects or artistic text, so when adjusting the bounding box the text stretches instead of wrapping. I have tried both importing the file as well as opening it. What am I doing wrong?
View 6 Replies
View Related
Oct 4, 2012
I have AutoCAD Mechanical (but only use ACAD), and now every time that I try to change the color of something (line, circle, text...) my AutoCAD crashes! {This is very frustrating}
Currently the only way of changing colors is through Layers.
View 5 Replies
View Related
Aug 1, 2013
When resizing paragraph text, the default is that the shape size changes, but the text properties stay the same, so if it was a 12 pt before, it will be a 12 pt after.
IF you hold ALT while resizing, it will reduce the size of the text and move tabs so that it gives the same appearence as before. This is great. A 12 pt might be reduced to an 8 or 6 pt or less.
BUT if you select the paragraph text with a bitmap OR an Object that completely overlaps it. Holding alt looses the ability to maintain perspective and proper proportions.
I can reproduce on video if you need me to.
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
View 8 Replies
View Related
Jul 26, 2012
I have created a A4 size leaflet, there I put a three column paragraph text layout (font used: Arial; 11pt), now I to reduce the leaflet size, so if I transform the entire design by grouping all object along with the text but text size is not reducing...the font size still 11pt.
View 3 Replies
View Related
Oct 17, 2013
I'm trying to change the tabs on a paragraph of text but my tab window floats. I need it to be tied to the block of text. At the moment, if I move across the page, the tab window will no longer be above the text I'm trying to edit.
View 7 Replies
View Related
Feb 25, 2012
I am typesetting an A4 document using paragraph text. When I get about a third of the way down the page the computer slows right down and gets worse and worse as I go on. I have reformatted my hard drive and reloaded Corel draw but am still having the same problem!
View 8 Replies
View Related
Feb 12, 2013
I need to import DXF files to Corel, but when I import them, the text appear as paragraph text, not as artistic text...that's not a problem if the paragraph text includes all the text...but it do not do that. Some texts appears as paragraph with red lines (so it is not possible to see it, as well as not possible to convert directly to artistic with Ctrl+F8). Also, some paragraph text appear as 2 lines instead of just one, because it do not feed in wide but yes in height.
I would like to import the text directly as artistic...or as paragraph,but with the same appearance of the original DXF file.
View 15 Replies
View Related
Sep 2, 2011
I have been able to do a text wrap which works great. However, I need to be able to move the boxes along with the paragraph if, say, I change the beginning and causing the entire thing to shift.
So far when I enter anything and the boxes are just inserted with text wrap the words move together but leave the boxes where they are. I can move the boxes along after words by just pushing the down arrow but that means I have to go through and move each one which is time consuming and frustrating.
Is there anyway to perhaps insert the box directly into the paragraph so that it is all one thing?
Or is there another way to make this work?
View 7 Replies
View Related
Aug 15, 2011
The paragraph text always shows a black dashed border (or red, when part of the text is not shown). Sometimes it is very difficult to evaluate a design/layout, when the borders are shown. So I searched an option to hide this border, but did not find any. How to hide this border?
View 3 Replies
View Related
Oct 25, 2012
i'm new to this, is there a way to split a paragraph text per line but will still be an editable text?
I have to select each line, cut. then paste each for me to do it, is there an easier way to do this?
View 2 Replies
View Related
Nov 13, 2012
CDR X6 leading.PNG
There are years since I worked in CorelDraw. However, recently I got a project from a client. I have to implement 14 languages translations into a document. The work is, so far, Copy/Paste from MS Word, paragraph by paragraph. I didn't find a better way, yet.
At a point I run into a problem. Inside a Paragraph Text frame the text has a strange leading, or something (See attachment).
View 6 Replies
View Related
Nov 23, 2011
I have a document of 300 pages or so of flowing text which I wish to edit into chapters.
Ideally I would like to select the start of a line of text and place it at the top of a page where it will then stay without breaking the paragraph links, as in Word (this also maintains the word count across the whole document).
Alternatively, could I simply break the paragraph links? When I attempt this now with Arrange/Break Paragraph Text, all that happens is
that a new page with an unlinked text frame appears, but the 'before' and 'after' pages are still linked, which defeats the objective.
The only way I've found to divide the document up is to copy it whole and then delete pages before and after the required chapter breaks and then reassemble them into one document, which is pretty laborious.
I'm sure I'm missing something really basic here.
View 8 Replies
View Related
Apr 30, 2012
Many times I am unable to see the dotted line of paragraph text handle while editing in it. Why it is so. I am using coreldraw x5
View 1 Replies
View Related
Jul 23, 2011
Is there a way to pick exact colour for para text and apply to the rest of the text? I tried the Eyedropper tool but can't seem to do this for paragraph text. I can pick exact sample but can only apply to the rest of the text body.
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
View 6 Replies
View Related
May 31, 2012
I go to Tools > Options > Paragraph Text Frame and untick 'show text frames'. I then go to Document and tick 'Save options as default....'. Restart. No change, I still see a red dotted line around the text frames. How do you turn these off? If I can't do that, can I at least change the colour?
View 9 Replies
View Related
Mar 21, 2008
is it me being picky or expecting too much. How come this useful feature of horizontal & vertical scaling of paragraph text fonts still haven't been implemented as of CorelDraw 14? All the other illustration packages support this feature and Corel just never seem to care about it.
View 6 Replies
View Related
Aug 17, 2011
I am doing a job with columns of donor names (originating from a Word file). Most of the lines space just fine but occasionally there is a 'phantom line' for want of a better term, sort of like I've gone from single spacing to 1.5 or so.
The thing is my paragraph text stats don't change... I highlight good lines - they show as 100%, I highlight the troublesome section, it shows as 100% and there is nothing in the Word file to show that this originated there.
As the job needs to get out the door, I'll just cut out the offending bits, make them artistic text and drop them back in to fit properly. WIth more than a thousand names this is getting pretty old pretty quick.
View 3 Replies
View Related
Apr 15, 2013
why the bounding box is so wrong when exporting paragraph text as EPS and placing it in InDesign or opening in Photoshop? See screenshots below. Text is being convert to curves in the EPS export dialog box.
At one point today, I was exporting an entire 8.5x11 page with a small block of paragraph text in the middle and it came into InDesign at 10x11".
Draw 16.3.0.1114, Ghostscript GPL 8.64
View 6 Replies
View Related
