I recently created a logo for a website in coreldraw. It was a black and yellow taxi sign. When I exported to png 24, and put it online, it did not look quite black, more like a bit brownish actually. Opened it in photoshop and sure enough, instead of #000000 my black is now #373435 ...
I need it to remain black. I made sure I chose black, and it looks black in CD, but again, export to png 24 and it's no longer black.
I recently just got the X5 version of Corel. I have been having problems holding the brightness of my colors when I export to web in a png format. All of my colors look dingy compared to my original drawing. I found a good black on my 256 shades of gray palette that looks the same after you export. Is there a color palette that will hold the brightness of the colors better than the rest when exporting for png? Or is there a better way to get my drawing as a transparent background and keep my colors bright?
View 1 Replies View RelatedCDX5: Whatever color I select for fill or outline is now set as the default color for fills and outlines without expressly setting it as such. Until now when I left or right click a color with nothing selected it allowed me to set it as a default fill or outline color for graphics, artistic text, or paragraph text. It does not do that now.
Is this a "feature" that's been added that I somehow enabled? In any event, how do I turn it off?
I've been noticing in PS CS that when i SFW (save for web) or just plain 'save as' the colors always end up a bit lighter than the original. I have no idea what is going on, i've never played with the settings so I'm not sure what changed, and i thought it might have been the color modes (mode = RGB, working proof setup = cmyk) but nothing seems to make a difference. It could be that the document mode is RGB and i'm working in a proof setup of CMYK, but I don't know enough to tell. I would play with it some more, but I don't know what is default and what isn't. Its really a pain to have inaccurate colors when exporting, especially when working with gradients or light colors, where they are subtle already.
View 6 Replies View RelatedI recently started working with the new adobe cc programs. I haven't encountered these problems before. I have created everything using CMYK and used no images. I checked the colors in InDesign CC and the colors looked washed out as well. I checked overprint view and the colors don't change in Illustrator.
The left is a screenshot of Illustrator and the right is a screenshot of PDF.
Adobe CC uses synced color profiles so the colors should be the same across all adobe products right?
Im having trouble exporting images with High ISO (3200+). Colors aren't coming out the same as the edit version in Lightroom.
Images are coming out brighter after export. Here's an example.
Image was shot in ISO 6400. Other images shot at higher ISO are also coming out brighter.Clearly a huge difference. Its quite disturbing.
I'm exporting a CorelDrawX5 file as an EPS so it can be opened in Router VCarve software. All the lines of the artwork in the CDR file show up as solid lines before being exported.
After being opened in the Router software as an EPS, the lined artwork shows up in pieces. I've never had this issue before with the Vcarve software or Corel, but I even tried rebuilding the files from scratch, and it still happened so I'm thinking its a corel issue.
I am using corel x6 and out putting to laser engraver/cutter, router and water jet. For laser engraving in particular i am have trouble getting a reasonable image. It ends up being pixulated. An it is odd as some times i am engraving one inch square area and some times 2 feet square. The relationship between DPI and size seems to be broken and i can not figure out why. I am normally working with vectors but some times i need to engrave with a bit map. So i will export the vector to a bit map then import the bitmap into a new document and output to the laser. I output to the laser directly from with in corel 13. It is when i import into corel that i can see that the bitmap is pixulated. if I export at 1200 dpi it is better but not good enough. For an 11 inch square out put i think it was a 43 mb file. [URL]....
View 4 Replies View RelatedI'm having some bother when exporting graphics to web with CS3. Photoshop keeps replacing my colours.
View 4 Replies View RelatedHow do you export from coreldraw to illustrator without it cutting up compound paths?
Currently if you have text that has been converted to curves, all of the letters with counters (or holes in them like O, P, B etc) get cut in half. Surely there's a way to stop this?
Which exporting method/format do you use to export your CorelDRAW projects? I'm talking about exporting web projects for Web purposes so the default colors of my doc are RGB, the default resolution is set to 300 dpi.
I tried many combinations, but the only way to get EXACTLY the same image as on my screen, is to do a "print screen" and then paste it on any photo editing program with no background, and save as JPEG.
I calibrated my monitor with Samsung's Natural Color Pro, and I added the created profile to "RGB profile" in "color settings" (so I don't use the standard sRGB profile).
Another information, I exports my projects to .JPG format, maybe I'm wrong? I use .JPG because the results are acceptable and the exported file size is low compared with other formats.
First of all I don't use the "export" option from the "file" menu anymore, because after a few attempts and combinations with this option, the results were just AWFUL, even when I opened the .JPG file on the same computer on which the project was created (so in theory it should be OK on my screen but not necessarily on other computers with sRGB, or custom calibrated profiles). I think it is because CorelDRAW embed my "Samsung Natural Color Pro ICM" profile, which won't display the image correctly on computers with other color profiles installed.
That's why the tool I use to export is "export soft proof" in the "color Proof settings", clicking "preserve RGB numbers", also in .JPG. With this option I have the possibility to embed another color profile, for example sRGB or even AdobeRGB to the project, and the results are acceptable but... they STILL look slightly different from what I have dispalyed on my screen. And here I think the main reason is "background color" option. I cannot uncheck it, or set to "no background", and I have noticed that the chosen color influences the look of my project. So with white color background it will be a little "washed out", with black it will be to dark etc..
With .PNG format I also don't get satisfying results, I tried with different settings combinations, still the colors are washed out with no saturation, maybe I didn't figured out yet how to set it properly?
Finally, I can get a perfect result (in that sense that as far as I can see, it is identic with what I have on my screen in CorelDRAW) with .BMP format, but first I don't know if this format is compatible and adequate for Web purposes, and second the files are pretty big after such conversion, even after decreasing the resolution to 96 dpi.
I am trying to export my file to a jpeg o that i can print out my file on a Walmart Photo center & I am having no luck.
View 8 Replies View RelatedOne of our tech writers has a handful of screenshots (mostly JPEGs and TIFFs) that he wants to use in a manual. However, the customer requires that the graphics provided to them be in .cgm format.
Despite all of my attempts (using CorelDraw X5) to import the bitmaps and then save as or export to .cgm, the customer says the files are "blank" and unusable. When I try and open the .cgm files I created using a web-based file viewer, the graphics show up as completely black. I have opened known good .cgm files with this same viewer, and the graphics show up as expected.
I have tried all of the different options avaialble to me (to the best of my knowledge; to call me a novice with Corel would be an understatement), with no success. Am I missing something? Or is there some other way I should try and accomplish this?
I need to export on a regular basis parts of a X6 file to eps. The files are huge an can contain all sorts of filter. They are all powerclips, some with shadows and transparency and symbols containing JPG's.
When i export the first part of it most at the time it works well, exporting the second set I am ending up with only half the data. If I copy and past into a new document and try from there I might get lucky or some other parts are missing, if I reduce the size by 50 percent same thing.
When I export my CDR file to EPS, which I've done thousands of time, it seems to export, but when I try to open it, I get an error "The file.......is an unknown format and cannot be opened". When I look at the file profile in my documents, I can see that it says "0 KB"
I can open up older EPS files from my documents fine, but not able to do that now.
Normal
0
false
false
false
EN-US
X-NONE
X-NONE
MicrosoftInternetExplorer4
I created a vector design in Corel X6 using a vector powerclip in the design. I would like to be able to export it as EPS and AI but when I do this and view it. the powerclip portion of the image separates from container. The power clipped image is just sitting on top of the image that it was clipped to. Is there a work around for this? I want to keep my image intact.
I'm attempting to print a picture for a present and I can't get file printed like Corel X6 displays it. I'm using a Deskjet printer. What are the correct settings for a quality printing?
View 13 Replies View RelatedI ve been using Corel for years, but i always have an issue when exporting the file to jpg,png,bmp formats
I always get 1 extra pixel when exporting. E.g. my selected area is 1000 pixels wide, and when i try to export i get 1001.
Read a few info about bleeding settings, but i cant make it work. I currently use X5 and my Page settings show Bleed 0%
I export simple text to .ai file format for my vinyl cutter to cut names. However, after importing into vinyl cutting program, the letters are split. The 'o', 'a' and 'e' all have a vertical line through them. However, when I export from X3, there is no issue.
I have checked export settings, converted to curves etc, but nothing works. why this occurs on X5 and not X3.
I seem to be having a problem upon exporting the file to a PDF, which is very image heavy. All of the images in the file are at least 300 DPI if not much, much larger. However, when I export to PDF the image resolutions are very low. When I sent it to the printer (who does not accept CorelDraw files so it has to be PDF) they remarked upon the low resolution and you can tell the quality is terrible on the proof. When I print a copy of the brochure on just our color printer at work (same size as the brochure...it is not larger) the images are completely fine. What am I doing incorrectly?
View 12 Replies View RelatedI want to create my own colors.I want to name with the name (word), as are the other colors (for example: cyan, magenta, Dark Brown ...).I want to create for example: Coca Cola Red or Ford Blue
I have Corel Draw X3 and Windows 7
I have the problem to export the file either png or jpg to the exact 330x250 px. The thing is it exports to 330x249!! and I cant upload the design. I know how to export because any other sizes work fine e.g. there is no problem in exporting to 331x251 px, but can't export to 330x250.
View 3 Replies View RelatedI have a vector image in CorelDRAW X6 which i recently purchased. If i export the image as a JPEG or png at the original size the file is fine in the export preview screen. If i reduce the size of the image and than go to export it, the image is very poor, even tho it is still a vector format and haven't exported it.
I never had this issue in X5 and it seems that X6 doesn't hold the resolution when i resize it.
Whenever I export a vector containing blend groups from CDR x5 to AI , the corresponding AI file does not contain the blend group, rather a simple group of 50 objects that have to be deleted and the blending redone in illustrator.
View 9 Replies View RelatedProgram: CorelDraw X6 64 bitOS: Windows 7 SP1 64 bit
I have problem when exporting selected only artwork to eps. The artwork itself contains standard fill objects with no strokes and no special effect on each object (drop shadow, powerclip, etc). On EPS Export dialog I change nothing, just clicked OK button.
The problem is there is no sign if the process success or fail.The file created only have zero bytes.The File>Exit menu is dimmed.When I try to close the document, it say:
Some of the documents could not be closed, because tasks are being performed in the background. Check the status bar of each opened document to see what tasks are being performed and their progress.
I can't close the document and exit the program, so I have to use Task Manager. Also if I continue to edit the artwork, i.e. selecting an object inside a group, the program crashed.
The Windows Crash Report:
Problem signature: Problem Event Name: APPCRASH Application Name: CorelDrw.exe Application Version: 16.0.0.707 Application Timestamp: 4f4c60a4 Fault Module Name: ntdll.dll Fault Module Version: 6.1.7601.17725 Fault Module Timestamp: 4ec4aa8e Exception c0000005 Exception Offset: 000000000005386a OS Version: 6.1.7601.2.1.0.256.1 Locale ID: 1057 Additional Information 1: 91e0 Additional Information 2: 91e002aff0b00b72d21810f7f6e3ec21 Additional Information 3: df3c Additional Information 4: df3c618bdba74b45b8aca9fde7c3e7c7
I want to export a Corel draw X6 picture, with its layer and objects, to continue to work on with an Ipad.
I'm willing to buy any app that allow me to do the job on my I pad, unfortunately, I don't find the format or app to do this. I tried Ink pad, it imports PNG files or JPG files, but I loose the objects and layers. I tried to import as SVG files, although I got a vector picture, I lost all colors, and result is very bad.
Any format and app that may be used with some Corel draw format ?
I´ve made a collage with a lot of pictures with a page size of 120 x 80 cm.
I wanted to print a poster of the same size in snapfish, and they accept only JPG files. So I exported the collage to JPG with the best Quality I got.
The poster was printed, but the quality is poor. How can I export it in order to get good results?
I printed the poster the same size in my HP Printer (5 years old) with lot of A4 pages and the resolution of each page was much higher.
Printing the poster is expensive, that is why I really would like to reach the same quality with a JPG file.
Using CorelDraw X5 with Roland ColorRip 2.2?
I'm having trouble with my print/cutable files not exporting properly into ColorRip 2.2. When I open the EPS file I see the art but the cut lines aren't the "marching ants" that normally show up. The lines appear to be part of the art. It was working when I saved in PDF but now thats not working either. This has worked for years, since iv'e used both. This appears to be a new problem. (I rebooted my computer. But to no avail.)I wonder if I have to re-enstall CD X5?
When I export an Eps file to my other program, the color is off quite a bit, and sometimes changes the color completely. How do I fix this?
View 2 Replies View RelatedIs there a way to export certain objects from a file with multiple objects?
View 3 Replies View Relatedwhat I want to achieve is a jpg image, with one of my vector designs over the top of it, for use on a website.
This is how I have been doing things so far. Opening cdr file, containing the vector that i wish to use importing the image, then reducing its size positioning the vector over the top of the image adding perspective to the vector selecting both using the pick tool (dragging the selection square around both items) then selecting export for web.
This has worked for dozens of pictures so far. The problem is, my exported file is way too big, at 900kb. However, if I just export the image, it is 39kb. If i just export the vector, it is 25 kb. Yet when I export both it comes up at 900.
