I've had no problem using Ctrl+C in CDR-X6 for copying text until I installed a couple of other programs, now Ctrl+C no longer works. I presume it's been hijacked by the other software.
View 14 RepliesI have a strange thing going on. I could swear there used to be the standard Browser control of - + and reduce box in the Top RH corner like in any window and every other adobe product. However, I got a virus it was hiding in Adobe reader. I believe I cleaned it as I scanned with two different virus companies. Both came up nothing found. Cleared my Temp folder, dumped trash after un installing AE. Re installed AE and still no window control?
Plus in my system start tray where my programs are where Adobe Master Collection Folder is I open that an my AE icon is a generic icon, although it will work as a shortcut.
The other thing is that it is evident in my task bar as a 'pinned icon' Here is a screen shot of AE with no + or - in top corner...
Win7 Pro Srv Pk1
3770k intel
z77 mobo
Nividia quadro 4000
All is updated drivers/versions
I also lost Adobe Reader as I had to uninstall as that was the Trojan file home. I stuck the disc in but did not see the icon to re-install.
as the place I work at recently upgraded their PS version to CS6 and basically rendered my Intuos 4 completely useless because of the damn Alt/Ctrl modifier, which seems to control the "drag to create a copy of the layer function" regardless of the tool you're using.
It might be specific for my region, but Alt+Ctrl or Alt Gr modifer is used in order to reach certain keystokes, such as ], [, @, so when by default the brush size function on my wacom is linked to a "[" (alt+ctrl+f windows function), my tablet completely flips out and starts sending a mix of Alt, Ctrl and Alt + Ctrl function controls instead of the [ which I'm trying to use.
Alt + w/e functions work just fine, but I can't use any modifer using the alt+ctrl+w/e combo that involves creating a symbol, even while using the keyboard. For example, I can use the alt+ctrl+z command to undo something, but if I linked my brush tool to a "§", which is invoked by calling the alt+ctrl+m windows command, it will act as a normal ctrl + m command and open the curves window.
I don't know what happened when i opened my autocad it looks like the image below Untitled.jpg
also if i will right click on the drawing space, nothing happens, but below or in the command window, i can, also for example i drew a line, and i want to redo, the "CTRL" function using ctrl+Z is disabled, what happened with this one?
How can we enable object selection on "Ctrl + Click" in CorelDraw X3
View 6 Replies View RelatedI really got used to the short cut of editing text pressing ctrl+left SHIFT + t , this brings me right into the
text box where I am able to quickly access all the text features, now since last update every time I make a text change in that window my text drops one line down and even though I will hit the cursor to front and back space it bringing it right to top when I hit OK it still drops my text one line down, this has become very annoying...
I love this feature but I am unable to bring it back to its original functional way. I did reinstalled corel , and yes I did reset the application still the same thing is happening.
looking for to convert multiply pages with text and graphics into vectors quickly.
View 4 Replies View RelatedI re-opened the desk top opened new file -like usual- and the menu bar was missing the property bar.
I can find it in the lay out and also file- right click-tool bar- standard, it comes up but covers the whole menu bar. How can I retrieve the original file set-up, where it s incorporated in the new file?
I have lost the installer that I purchased to upgrade to X4 when I bought a Vista computer. I don't remember if there was a new license key, but if there was, I have lost it too. I still have the old version that I upgraded from and its key, but it will not function on my now Windows 7 system.
View 1 Replies View RelatedI have a dwg showing both sides of a dinette. One side ("Left Booth") was grouped & then duplicated. The duplicate ("Right Booth") was mirrored and moved to the other side. I "UnGrouped" the duplicate ("Right Booth" - not shown in the attached clip), but I can not UnGroup the original "Left Booth" grouping. The original grouping has NO special effects (drop shadow, etc.), simply a group of lines, curves and rectangles. I can't find any "attachment" between the two.
How can I ungroup the "Left Booth" group?
i have 63 grouped objects - some of which include artistic text. I have worked with CD for a while now and have never had this happen. what have i done??
View 11 Replies View RelatedRe: CorelDraw X5 v 15.2.0.686 [SP3] + Windows 7 x64
After applying SP3 Draw X5's 'Edit bitmap' command is always greyed out, regardless of the bitmap selected — even when the originating file is a CPT.
At first I thought of a corrupted Workspace, so I reset Draw with F8 at execution. No dice. This makes me think there may be an odd Registry setting or ini file entry that Draw needs to 'find' Photo-Paint X5. Photo-Paint appears to have emerged from the update unscathed.
Possible to control (i.e.: set up & check the current value) the drawing scale directly from the command bars, without having to get deep into the Options menu (which is really unpractical and slow).
Actually there is a "Drawing scale" icon, but it allows to choose only among a limited selection of values: if the required drawing scale is outside this range (which happens quite often in my job), there is no alternative from the Options way.Moreover, if the scale is not included into the above-mentioned selection of values, the icon will not show the set scale value, but only a totally useless "Custom" string.
Is there a way to control the layer transparency in CorelDraw 5? We often have control objects we need to superimpose over the actual drawing object, but want to see through the control object (on a higher layer) so we can align the actual drawing beneath the control layer.
View 14 Replies View RelatedIs there any way to control how far out the color spreads into other sections of the mesh?
I'd like to take a class on how to use this tool
I need to use CorelDraw X5 the bigger the pain in the neck the issue becomes.
The tabket is a Wacom Intuos 3 an my pen is set up to have a right click for the lower side button, double click for the upper side button and single click for the nib. In all applications and Windows this works as expected but as soon as I run X5 I lose the right click and it takes several minutes to return after I have quit X5.
While using CorelDraw the only way to get a right click is to hold down the nib to bring up a pop up menu.
Is there a setting in the tablet driver (or CorelDraw?) that will stop this happening?
I have lost the CMYK and RGB color pallets on Corel, we have tried re-installing, but still nothing!
We need these color palletes for printing purposes.
I have lost the print preview after 6.2 update. Is there any solution or am missing something at.
CDGS x6.2 - v16.2.0.998Environment: MS Windows 8 Pro 64-bit OSHardware: Intel DG45ID, Core2 Quad CPU Q8300 @2.5 GHz, Memory DDR2 8GB
it seems like in the past whenever i made either artistic text or paragraph text color default, that was reflected in the control Text using the Dimension tool.
but no matter what changes i make in X6, it remains a chalky blue.
I have scoured the internet and am unable to find a calendar control or date picker that will work in 64 bit. I recently upgraded from X5 to X6 and I have several VBA macros that have date pickers. These macros are now useless in x6, which in turn makes x6 usless for me.
Does any option available to me that doesn't include downgrading Corel versions?
Every since I updated CDx6, Photo-Paint no longer allows for drawing or erasing in a straight line by clicking, pressing the alt key and clicking again. Instead a scale comes up that changes the brush opacity...What happened? I can't figure out what happened. See attached file. The red arrow indicates what comes up when alt is pressed.
View 5 Replies View RelatedI try to control the width between the border of rectangle and the edge of the text I put inside.
Is this possible with X4 ?
Using AutoCAD 2013 and TOL command to generate feature control frames. We set our lineweights based on layer assignments.
Problem is that when printing, AutoCAD seems to randomly assign a lineweight to the feature control frames. It can vary from what it's supposed to be (such as lineweight set for the dimension layer) or thicker than even what the object lines are set at. Seems to pick a random linewieght at time of printing for these elements (just the boxes, not the symbols/text itself).
Is there a setting we should be defining somewhere to force it to follow the lineweight of the layer that it has been assigned to? Known bug?
Using photoshop, I found this shortcut really helpful, especially when I just started learning layer masks. Then all of a sudden it stops working! I can't do this action anymore unless I go to EditStep Backward.
View 2 Replies View RelatedIs there a to access the Alt key screen functions (the quick Eyedrop, (holding Alt and click the color) and the Zoom in and Zoom out (holding alt alt and scrolling with the mouse wheel) with other key instead of alt, for instance the Ctrl key?
It is really annoying to me to deal with it, because in my shortcut configuration I use the keys "Q" and "W" to increace and decrease the size of the brush and the keys "A" and "S" to increase and decrease the hardness of the brush. What happens is that when I hold Alt to pick a color or to zoom, it calls the menu bar's shortcuts (it underlines the menu shortcuts) , so If I do so and press "S" it calls the Select menu, which is not what I'm trying to do.
In Gimp, the pick a color and zoom in and zoom out actions are configured to work with the Ctrl key instead of Alt, so the shortcut menus are not an issue. Is there anyway to switch it to Ctrl? Is there anyway to make the Alt stop calling the menu bar?
The issue I'm having is that, while using [URL] (ArtBee's 3D Box PSD), I cannot save the smart layer.
[URL]
Basically, as per the documentation instructions I'm supposed to press "Ctrl +F10" to render the 2 smart layers onto the projected box. Problem is, when I do it, nothing happens.
I've done it on CS6 with no problems, it's only after switching to CC that I cannot save.
While working in SolidWorks, AutoCAD, etc. performing ctrl+V launches PhotoShop. Repeatedly. This is in no way desirable. How do I disable the ctrl+v/PhotoShop relationship when not using PhotoShop?
View 3 Replies View RelatedIn previous versions of PS I could just move the crop area around freely, rotating and resizing it. But now it seems it always snaps to is default position and I need to keep the CTRL-key pressed if I want to move it around without snapping.
View 1 Replies View RelatedWhen i press Ctrl+D in ps6 to change my background and foreground
to black and white it does the white part right but it gives a combination 75+45+35+100 to give black and each time i have to change manually to get black .
I was trying to make a selection using the magnetic lasso tool and every time I get about half way done my screen goes blank. I can hit enter and return to the original screen but then ive lost my selection. I have used other tools to make a selection and have not had problems, only with the magnetic lasso tool does this happen.
View 9 Replies View RelatedI installed the other day Photoshop CS2.After a while working with it i wanted to select a layer but s the Ctrl+click command didn't do nothing. Anybody knows if there is another shortcut to do this?
View 4 Replies View Related