I am new to Corel. I understand how to make media brushes but I can't figure out how to set the brush so it repeats and not simply stretch the brush out along the path. I made a simple chain link and I would like to stroke the path and have it come out like a linked chain.
View 14 RepliesBrushes are wonderful tools.
I would like to be able to design my own artistic brushes. I understood tha I can drop an object or group in the artistic media docker and it becomes a custom brush or spray. I did it and it works well. nevertheless, controlling the size, spray spacing, etc looks like a bit tricky. Is there some reference where I could get more information on "how to make my own brushes"
I get a message the erase tool cannot be used on that object.
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
Draw just crashed as I was selecting different artistic media for the background of an image.I had opened the file by double clicking it... it was just the start of a simple rollover which just contained text and a squiggle with an arrow property at one end of the squiggle.
The foreground and squiggle are in the foreground on a layer. it has a linear gradient fill. going sideways. The text is a custom true type font called "Comic Book Commando" which I haven't had any trouble with.
In a separate layer, I had a simple short horizontal line that I was trying out different artistic media with. It's just a swipe that's pretty much horizontal. I laid it down with the "Artistic Media" brush that I selected from the toolbar which I have parked at the left vertically.I had the horizontal line selected with the regular picker tool. I have the artistic docker open on the right side beside the line of colours palette at the far right of the window.
I clicked on each artistic media types all the way down the list... and along the way I made 4 duplicates of the simple line and put them into separate layers that I then turned off the visibility and turned off the printing.
At the point Draw crashed, I had the simple line selected, and I clicked on the last of the paintbrush style artistic media from the docker (the ones with the paintbrush icon beside them)... crash.
The drawing is very simple. Basically, I was just going through the different artistic media options. I had a pdf open, a file explorer, and one IE browser window... none of these other programs were doing anything 'active' at the time.
i've a problem with the artistic media preview. The preview of the brushes are not shown. (See screenshot)
I'm using CorelDraw X5 15.2.0.686 on a Windows XP SP3 machine.
I create some curves with freehand or 3point curve or else (image on the left). Then I use the artistic media docker to convert it to artistic media. But the artistic media fill is empty.
So I right click on black to fill it, but it fill between the first and last node (image right). Weird.
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
the fonts wont change to artistic media. what i need to do.
View 3 Replies View RelatedI have been trying to make an Artistic Media Spray spray of three images and when I apply them to a shape, I get mess. I can do it fine with one image but when I try to use a few image it doesn't work. I have looked for a tutor and not having any luck.
View 7 Replies View RelatedThe artistic media width adjustment becoming unstable finding it difficult to control the width what is happening.
View 4 Replies View RelatedIs it possible to do pressure sensitive and choose your artistic media brush?
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
When I go to change the thickness of an artistic media stroke, it jumps up from .045 to .095 or down to 0.3, or similar sorts of jumps in either direction, when I want to make finer adjustments than that. I'm surprised that a program that has so many options and precise ways of doing things wouldn't allow that. Is there no way to accomplish that?
View 6 Replies View RelatedI made an elipse and changed it to arc.
Than I used artistic media tool to bold it but the arc get broken.
The arc I am talking abouth is Yelow. Red circle is showing a plece where arc get broken.
Can you apply tranparency to a stroke made by artistic media? his seems like it should be possible... I've been told to use the transparency tool for my type of transparency needs... but I can't find a way to get this to work. It would be handy... in PS, you just adjust the transparency slider for the object or layer. In Draw, how is this done specifically for an artistic media brush stroke?
View 1 Replies View RelatedI have installed X5 along with all service packs on my main PC (Win 7 Ultimate 64bt) everything works fine and has done since first install. To use media brushes I click on..
Artistic Media > Calligraphy (for example) in the drop down menu > select a nib style from the next drop down that displays 'samples' of the various nibs. All fine.
As I am having to also work from home too at present, I have installed X5 on my study PC. I try exactly the same proceedure on this other machine (similar spec but Win 7 Pro 32bt) with same service packs, same install disc etc.. and all I get is blank boxes, no nib previews. This happens if I am using standard Corel media or 3rd party brushes??
See screen grabs below:
Nothing shows up..??
... using default Corel media in default Corel directory..
... or 3rd party brushes.
I have tried un-installng and re-installing but no joy. All brushes work and display fine my office PC.???!!
Is it possible to make your own Natural (Media) Brushes and add them to your library?Anywhere a tutorial about this how to go about?And I assume that it should be possible to design your own symbols as well.
[URL]
is there a way to erase (like with eraser tool) the artistic media brush strokes ?
eraser tool works on every draw/shape/stroke but the artistic media tools. is there a workaround?
I use coreldraw mainly for pattern making (as well as graphic design) but I would also like to make fashion sketches.
This page has wonderful brushes that would be perfect.
[URL]........
But it is for Illustrator. (Bummer, I dislike that Illustrator is more popular despite that CDR is easier to use). I have yet to purchase the brushes as I am not sure how I can use them in CDR.
I would like to apply a transparency to some brush strokes. But when I click on a group of brush strokes, or select a single brush stroke, I can not start a transparency, or I get an error that there are too many objects.
I have some brushes that emulate smoke, but I would like to ad transparency to them.
can i make halftones from a cdr file to make printing offset plates?
View 3 Replies View Relatedhave to select an object under an artistic media brush object. i try hold down alt key when select the object under the artistic media object but it select the second object
View 2 Replies View RelatedI have a logo which appears in the footers of all of our technical manuals. Word recognizes it as a picture, and so our printer prints it in color, not black and white, so we are charged for the color copies.
I have exhausted my options in Word, and have been trying to create it as a TrueType font in DRAW, so word just thinks it's a symbol, not a picture.
The only file I have of the logo is a .bmp, so I've been tracing it to get it into vector form to manipulate. However, after all of my welding, combining, front minus back ect. ect. ect., I still can't get it down to the "1 object" requirement to make it a font.
Here's the logo:
I want to make a chevron pattern so an A4 peice if paper would be covered with symmetrical zig zag lines. How can I do this.
View 3 Replies View RelatedIve got Coral draw 12. What I want to do is to change normal text to a line so that my laser cutter can pick up the fact that its a line to cut and not an engrave. Or is that not possible? if so what program would i need?
View 5 Replies View Relatedarrows.jpg
I need to make lines of different thicknesses, with arrowheads. However, when I increase the line width the arrowhead should not be proportional. It need to stay a bit smaller.
Example: if the line is expanded to "Thick 3", I need the arrow keeps equivalent to "Thick 2" - for aesthetic reasons.I can do edit as I show in the bottom of the sample picture.
However, I need to build HUNDREDS of arrows of different sizes.Is there any way (Macro function?) permitting I enlarge/reduce line thickness and allowing me to edit the arrow without changing the line thickness?
Important Note: Is not enough I edit some arrows and save them as a kind of Template, then import them to work. The arrows have different ways in thickness and may be straight, curved, winding, etc.. Hence the need to edit the edges easily.
I was asked how to make a honeycomb pattern during the Meet the Master session on facebook. Here is a quick short tutorial on making patterns, specifically the honeycomb pattern in DRAW.
158110.aspx
Fluid - Richard Reilly
[URL]......
[URL]........
Corel X5 is getting better but Im having trouble making my files to jpeg, last version (X4) you can make your own percentage on making jpeg, right now, I dont know what kind of jpeg will I choose to make my file print on any medium. the choices are only Highest, High (80%), medium (50%) low (20%) and lowest at 0%, every time I choose some and make it CMYK version, the file was damaged and discoloration, how can I do it on coreldraw 15 like what im doing last time on coreldraw 14.
View 2 Replies View RelatedI see that one of the export file formats in X4 (I have CGS) is .SWF, the Flash file format. Can I create Flash animations in CorelDraw using vectors and/or bitmaps (JPEGs) and if so, how?
View 6 Replies View RelatedI'm having trouble making fonts using X4. I've found the export "ttf" filter, and the dialog opens for my first letter, which allows me to assign the ASCII position, and that works out fine. A TTF file is created, with that letter shown. However, when I try to export the next object for the next letter, instead of simply opening the assigning dialog for the next object, so as to add to the file, it goes to the dialog asking me to name the file, and when I do, Corel crashes.
View 14 Replies View RelatedI am still using Coreldraw X3 I will be purchasing X5 next month. I need to know how to make a greeting card in X3.
View 1 Replies View RelatedI have Corel 15. I want to take a picture and make it gradually go transparent from the middle of the picture to the top (using Photo Paint I guess), you know the thing with the checkerboard squares. Then I will put it in Draw and overlay some text across the top area where it has gradually gone transparent.
I do not want a sharp line between regular and transparent as if I cut a hole in the background and deleted the hole part. I want a gradual fade sort of transparency for the entire image. I have searched the internet for how to do this even using using Photoshop and there are not instructions available.
I am trying to replicate a jpg. This is the toe of a skate. I have purchased a new graphic and would like to put this same sparkle on the toe.
View 3 Replies View Related