I have been trying to make an Artistic Media Spray spray of three images and when I apply them to a shape, I get mess. I can do it fine with one image but when I try to use a few image it doesn't work. I have looked for a tutor and not having any luck.
View 7 RepliesIs there a way to use some of the pre-loaded brushes from Paint in Draw?
My list of pre-loaded brushes in DRAW is much shorter than the list in Paint. I'm specifically hoping to be able to use this brush in my Artistic Media in DRAW. Or do I need to create a new brush in DRAW? I would prefer not to have to work in Paint at all.
I just need a spray can that just sprays dots in DRAW (instead of the clipart type images that are part of the default).
I get a message the erase tool cannot be used on that object.
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
Draw just crashed as I was selecting different artistic media for the background of an image.I had opened the file by double clicking it... it was just the start of a simple rollover which just contained text and a squiggle with an arrow property at one end of the squiggle.
The foreground and squiggle are in the foreground on a layer. it has a linear gradient fill. going sideways. The text is a custom true type font called "Comic Book Commando" which I haven't had any trouble with.
In a separate layer, I had a simple short horizontal line that I was trying out different artistic media with. It's just a swipe that's pretty much horizontal. I laid it down with the "Artistic Media" brush that I selected from the toolbar which I have parked at the left vertically.I had the horizontal line selected with the regular picker tool. I have the artistic docker open on the right side beside the line of colours palette at the far right of the window.
I clicked on each artistic media types all the way down the list... and along the way I made 4 duplicates of the simple line and put them into separate layers that I then turned off the visibility and turned off the printing.
At the point Draw crashed, I had the simple line selected, and I clicked on the last of the paintbrush style artistic media from the docker (the ones with the paintbrush icon beside them)... crash.
The drawing is very simple. Basically, I was just going through the different artistic media options. I had a pdf open, a file explorer, and one IE browser window... none of these other programs were doing anything 'active' at the time.
i've a problem with the artistic media preview. The preview of the brushes are not shown. (See screenshot)
I'm using CorelDraw X5 15.2.0.686 on a Windows XP SP3 machine.
I create some curves with freehand or 3point curve or else (image on the left). Then I use the artistic media docker to convert it to artistic media. But the artistic media fill is empty.
So I right click on black to fill it, but it fill between the first and last node (image right). Weird.
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
the fonts wont change to artistic media. what i need to do.
View 3 Replies View RelatedThe artistic media width adjustment becoming unstable finding it difficult to control the width what is happening.
View 4 Replies View RelatedIs it possible to do pressure sensitive and choose your artistic media brush?
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
When I go to change the thickness of an artistic media stroke, it jumps up from .045 to .095 or down to 0.3, or similar sorts of jumps in either direction, when I want to make finer adjustments than that. I'm surprised that a program that has so many options and precise ways of doing things wouldn't allow that. Is there no way to accomplish that?
View 6 Replies View RelatedI made an elipse and changed it to arc.
Than I used artistic media tool to bold it but the arc get broken.
The arc I am talking abouth is Yelow. Red circle is showing a plece where arc get broken.
Can you apply tranparency to a stroke made by artistic media? his seems like it should be possible... I've been told to use the transparency tool for my type of transparency needs... but I can't find a way to get this to work. It would be handy... in PS, you just adjust the transparency slider for the object or layer. In Draw, how is this done specifically for an artistic media brush stroke?
View 1 Replies View Relatedis there a way to erase (like with eraser tool) the artistic media brush strokes ?
eraser tool works on every draw/shape/stroke but the artistic media tools. is there a workaround?
have to select an object under an artistic media brush object. i try hold down alt key when select the object under the artistic media object but it select the second object
View 2 Replies View RelatedIs it possible to create your very own brush or spray in Corel Draw x6 and save it for future work
View 4 Replies View RelatedHow do I get a normal brush or spray function? Now, when I release the mouse button, the lines turn into a fancy balloon image. I know that comes from the Brush Stroke List or the Spraylist File List, but how do I turn those functions off?
View 6 Replies View RelatedHow do I create a brush for spray effect like below?
View 2 Replies View RelatedDraw X6.4..if I make a line break in Artistic Text (Enter) I get a forced line break (as with Shift+Enter).In the X5 is still alright
View 13 Replies View RelatedI have expanded some artistic text say by 30%. Now I want to expend remaining all artistic text by 30%. How to do it.
View 3 Replies View RelatedI've got a bunch of filled ellipses scattered around a drawing, and I want to place numbers & symbols inside these shapes. But whenever I choose the text tool and click inside the shape Corel is 'automatically assuming' that I want to format as paragraph text, and then it's all over. The only way I can 'escape' the paragraph formatting is to delete the shape & start over.
Is there any way I can temporarily-disable paragraph text, or force the characters to be artistic text?
I used to be able to copy text from an email and a word document into Corel Draw 13 and easily convert it to artisitc text. Now it does not allow that.
View 4 Replies View RelatedA document with many artistic text line. Downsaved as version 12. Some lines get converted to curves, some don't.
All lines same font, same point size. Using macro to save. Saving manually has prompt to keep as editable.
through some difficulty I'm having in getting the leading (ie, line spacing) I want with artistic text, in CorelDraw 12? I have three lines of text, the first line of which has a font size of 20 pt, and the second and third lines having a font size of 13 pt. The default leading is greater between the first and second lines than between the second and third -- probably due to the font size difference. I would like to make the leading equal for all lines, regardless of font size, but can't figure out how to do that. "Format Text - Spacing - Lines" seems to offer leading only in relation to character height -- which automatically makes the leading between the first and second line larger (due to the larger font size used in the first line) than it is between the subsequent lines.
View 5 Replies View RelatedI've imported a logo to Corel Draw. The logo has several simple polylines. I'd like to convert them into artistic media in order to simulate calligraphic or hand made looking strokes. I pick the polyline, then I select Artistic Media from Effects menu. Then CD shows me the Default Strokes in a side docker window. I select any stroke.
The polyline changes, but I can't modify the stroke width spinner. Is there another method to convert lines to artistic media without redraw them over.
Is it possible to get the line thickness down of the calligraphic and/or pressure tools in artistic media? The minimum thickness seems to be .762mm (2.16 pt or 0.03"). I use a Wacom Intuos 3.
View 4 Replies View Related1. Artistic Media tool must draw in color! That's why we call it "Artistic" - first choose color, and then draw. It is natural.
2. After the object was created and COLORED by me, everything was fine, I try to reduce the size of the work and realize that I was forgot to mark "Scale stroke with object" option and there comes two problems:
2.1. I can't select multiple AMT-objects and change this COMMON option for them.
2.2. When I change this option FOR EVERY SINGLE OBJECT I previously made, it turns strokes back to black color!
And now comes the third and fourth problems:
3. Now I must SELECT OBJECTS ONE-BY-ONE AGAIN to re-color them!
4. And I have to remember every color for every stroke?!
I am new to Corel. I understand how to make media brushes but I can't figure out how to set the brush so it repeats and not simply stretch the brush out along the path. I made a simple chain link and I would like to stroke the path and have it come out like a linked chain.
View 14 Replies View RelatedIn the last 2 days Corel has decided to start changing Artistic Text to Paragraph Text when I copy & paste it across documents, completely changing the font, size & colour of what I am copying.
I've just done a factory reset & it's still doing it.
I don't recall doing anything that would change a setting.
The text I am copy & pasting are disclaimers that are all set on 1 document & I copy & paste them to a proof as needed.
I bought Corel X5 to design some 2D templates to cut wood in creating cabinets for a Volkswagon Bus Camper. An old VW Bus doesn't have a straight surface in it.
My objective is to take measurements inside the bus for each piece of the cabinet. Think of the inside roof for example... the mission is to create the front of a cabinet that goes from one side of the bus to the other. Thus, a straight line on the bottom and then an arc for the top of cabinet so that it will meet perfectly with the inside roof.
What is needed is to enter x,z coordinates into Corel Draw to define the shape, then plot the result on paper, verify by holding the paper to the actual roof, and then cut the wood using the paper template.I can see that a B-spline is needed, but I don't see how to enter the periodic x,z measurements in Corel to come up with the shape.
I need to make PDFs in PageMaker 6.5 that I can import into CorelDraw12. When making the PDF I have selected "embed all fonts" (I do not have the "convert to curves" option.) but the fonts are not being converted to curves. When imported all fonts display in Corel as artistic type or are substituted. Is there a way to convert fonts to curves in Pagemaker?
View 2 Replies View RelatedI know how to use the transparency tool to make and object partially transparent but is there someway to make an entire object transparent so that what you put behind the object shows through? I am using the symbol of our logo and want to put pictures behind it so that they show though.
View 5 Replies View Related