AutoDesk Smoke :: Finding The Transparency / Opacity Settings?
Sep 24, 2012Where do I find the Transparency/Opacity settings? I can't see them in either the Text Module or in Axis? Where do I need to look?
View 3 Replies
ADVERTISEMENT
AutoDesk Smoke :: Only Finding Discreet Fonts While Working With Text
May 2, 2011when going in to fonts, only Discreet are available. Assume it'a a Path problem, but not sure where everything is. Of, course, would like access to all fonts.
View 5 Replies View RelatedAutoDesk Smoke :: Way To Easily Select A Bunch Of Geoms And Change Their Transparency
Jul 12, 2012I have a Batch with 3 Action nodes inside. Each of these has multiple Geoms tucked away in groups.I only want to see some of the Geoms about half way through the clip.It's raised a few questions:
1) I can only think of animating their transparencies to make them appear at a certain point, is there some other way? Like if it was footage you could use the Timing in Batch.
2)I couldn't find a way to easily select a bunch of Geoms and change their transparency together, I could only do it by using Duplicate mode. But that takes all the parameters from the parent, what if you just wanted to alter one thing?
I could use an expression, but would I have to do that one at a time on all the Geoms?
3) What does the Parenting mode do exactly? can't you just parent thing while in Move mode? What does it add?
4) So I used Duplicate to link the Geoms to one in particular, it doesn't seem to have affected anything I didn't want it to (fingers crossed) and then used an expression on that to link it to a control axis for ease. Does that sound the easiest way?
5) And finally, I was just thinking it would be nice if I linked the transparencies to a control axis of some kind in the Batch, to affect all of the Actions. I half expected to find a 'Control Node' in the box Is there a particular node that would work well as a control axis?
AutoDesk Smoke :: Can't Save Custom Export Settings
Aug 30, 2013Is this a bug? I can't save a custom export preset. I set it up, hit save, give it a name then don't see it in the list.
View 2 Replies View RelatedAutoDesk Smoke :: File Export - New Audio Settings
Jul 17, 2012I'm working on Smoke 2013 on LINUX. There are new Options to export a File with Audio. Where can I read what each option is doing, because we had some mistakes on some Files because of the Audio.
How I can check my export setting.
AutoDesk Smoke :: Possible To Adjust Settings Of Red Files That Exists In Sequence?
Jul 13, 2011Is it possible to change the settings of red files that exists in a sequence?
I've tried altering the red import settings of a sequence that contained the same clip cut up and a sequence that contained red files and non-red files, but the change seem to only work on the original clips.
AutoDesk Smoke :: How To Prepare Data In Mocha Pro And Export Settings
Jan 30, 2013I have posted a new training video series on the Smoke Learning Channel.Mocha Pro to Smoke Interoperability
In these videos, you learn how to prepare data in Mocha Pro and export the settings into Autodesk Smoke. This includes Tracking Data, Masking Data and 3D Camera Tracking Data. It's a really good series to watch even if you are not using Mocha Pro with Autodesk Smoke.
You can view the video on the Smoke Learning Channel at URL....or you can download the video via iTunes. Just search for the Smoke Learning Channel.
You can also download the Media and follow along at: URL....
AutoDesk Smoke :: Proper Playback / Frame Rate / Project Settings?
Jun 26, 2012I'm trying to import some clips from Avid and the clips are playing back too fast.
In Avid, the clips originated as HDV 1440x1080i 59.94 fps. I transcoded them to DVCPro 1920x1080i 59.94fps. I exported the clips from Avid using "same as source."
In Smoke, I went through the library to select and import the clips. My Smoke Cfg settings are:
30i 1280x720@5994p, project settings 1280x720.
The clips playback as if they are running at 120% (best estimate).
in the Cfg template there are settings that are similar, such as 30i 1280x720@5994p and 1280x720@5994p. Is the "30i" for interlaced footage (ie HDV and uprezed SD)?
Smoke 2012 SAP SP1
Mac 10.6.7
AutoDesk Smoke :: Unable To Find Settings To Keep Broadcast Monitor The Final Output
Nov 13, 2012When I go into CFX/Action my broadcast monitor switches to the schematic view. Since I already have the schematic view on my computer monitor I want the broadcast monitor to keep the final output. I looked in the preferences but I can't find the right setting. Is there a away to do this?
View 1 Replies View RelatedPhotoshop :: Opacity And Transparency?
Apr 1, 2013When you merge two identical layers (with solid black-filled shapes) and with, say, 30% opacity both, the resulting layer will be a layer with 100% opacity but with 30% transparent black-filled shapes. How will you make this 100% opaque?
View 1 Replies View RelatedPhotoshop :: Transparency/Opacity
Sep 11, 2008How do i make a picture Transparent sorta?
View 1 Replies View RelatedPhotoshop :: Layer Opacity Vs. Transparency
May 8, 2006I was just wondering what the practical difference was between the Opacity of a layer and the transparency of a layer. They seem to have the same effect, but I reckon that Adobe wouldn't have seperated them for no good reason.
View 2 Replies View RelatedPaint.NET :: Preserve Opacity / Transparency When Merging Layers?
Jul 27, 2012So, as it says; I'm unable to preserve the apperance of my image as the Layers get Merged.
I have an Object which I intend to slap onto a background, I want the Object to be Faded from one side to the other with 1/4 Solid to the Left and the remaing 3/4 fading out to about 120-140 Opacity in the furthest Right Part.
I've failed to achive this when I use the Rectangle Selction to; select, copy, delete, make new layer, paste.
Repeating that process across the the 3/4 and then changing the Opacity Value of each layer in order to create a Fade effect.
Now here's the issue, when I try to merge the Layers the individual "Strips" change their Opacity Value as the Merge with the other Layers.
I want to Preserve the Appperance the Image have before the Layers are Merged.
I've tired switching Blend Modes but wihtout Success.
I've also tried to without seperating the Image into "Strips" in Layers, using the Gradient to cause a Fade, however it ends up fading all of the Image to some degree (and not just the 3/4), additionally I can't control the exact Opacity Value of the Fade.
Illustrator :: Transparency In Overlapping Objects Using Opacity Mask?
Jan 15, 2013I'm in the process of drawing a site plan which contains buildings, roads and wooded areas. I want to draw roads which go through the wooded areas. I want both the road and the woods to be opaque except where the woods overlaps the road (I want the wood to be partially transparent at the overlap). Example of the effect I want is shown below. I don't get this effect when trying to use blending transparency modes. I'm sure it can be done with the opacity mask but I've tried all sorts of combinations and not managed to get this effect.
View 9 Replies View RelatedGIMP :: Bind Number Keys To Specific Values For Opacity / Transparency Of Brushes
Apr 3, 2013I'm trying to bind the number keys to specific values for opacity/transparency of brushes, so I embarked for the shortcut key editor where I found that the "set transparency" does exactly the same as "completely transparent".
Is there a way to define what value "set transparency" sets it to? what I'm trying to do even possible with GIMP?
Paint.NET :: Clone Plugin That Has Opacity And Spray Settings
Sep 3, 2013The paint.net clone stamp does not seem one quarter as good as the photoshop clone tool.
Is there a clone plugin that has opacity and spray settings.
While I am asking, is there a airbrush spray plugin for paint.net.
CorelDRAW X6 :: Finding Adjustment Settings To Set Sensitivity For Selection?
Feb 9, 2013how to or where to find the adjustment settings in CorelDRAW X6 to set the sensitivity for selection?
I want the sensitivity for the Cursor to be higher to "easily" select objects. Currently, X6 appears to mimic Adobe Illustrator, which is not good.
AutoDesk Smoke :: Smoke And AJA Dual Stream Stereoscopic Output
Aug 29, 2013I know that the AJA Kona 3 card has 2 outputs. Can Smoke send one eye to one channel and the other eye to the other of the Kona 3 card? Dual Stream output is what I am really getting at.
View 4 Replies View RelatedAutoDesk Smoke :: Smoke And Sub-blacks / Super-whites
Feb 26, 2013Is there any way that Smoke can see/output sub-blacks and super whites? Can't find any way of seeing them on my scope, Smoke just clamps everything. It won't even see anything below zero in order for me to make a correction on it, everything seems to be clamped on import. I'm using ProRes HQ footage.
View 9 Replies View RelatedAutoDesk Smoke :: Best Plugin To Do Spline Warps In Smoke
Jan 16, 2014What is the best plugin to do spline warps in smoke?(need something like the distort in flame) I notice revisionfx don't make a warper for smoke on mac.
View 7 Replies View RelatedAutoDesk Smoke :: Importing And Using Alpha Channels In Autodesk
Oct 2, 2012I am experimenting with Smoke 2013 pre-trial and I am having issues with importing images and video with alpha channels.
1. If I have a layered Photoshop file or png with an alpha channel (a still frame lower third), I see that I can import it as a multi layered clip, but what is the best way to have it in the sequence to show up properly?
2. If I have a QuickTime in animation format or Pro Res4444 format with an embedded alpha, how can I import that file to show and cut it on a top layer to animate above my video?
AutoDesk Smoke :: Can Smoke Support OFX Architecture
Oct 18, 2012Can Smoke support the OFX architecture?
View 1 Replies View RelatedAutoDesk Smoke :: Selections In Smoke As In Combustion?
Jul 10, 2012Does Smoke have selection functionality similar to that of Combustion? As an example, you might want to selectively blur part of an image. In Combustion, you would draw a selection and then apply an operator above the selection to achieve this. I don't see a similar selection tool function in Smoke, but I imagine you could achieve the same effect by duplicating a layer and using a Gmask via the Wipe timeline FX.does Smoke not have a selection tool similar to Combustion?
View 3 Replies View RelatedAutoDesk Smoke :: Importing TWs To Smoke
Jan 10, 2014Whats the dealing with importing TWs to Smoke? I have a show that's 70% keyframed with timewarps and need a way other then baking the effect to bring it into Smoke. It's comming from FCP7 and we have Automatic Duck but neither the XMLs or AAF bring anything other then the first speed of the clip. Any way to retain the keyframes?
View 1 Replies View RelatedCorelDRAW X5 :: Unable To Keep Transparency Blend Settings
Aug 20, 2011So I'm creating some interface elements in Draw, and the shadow transparency blend settings always go out the window when I try to export my art as any type of bitmap. It just flips back to "Normal" regardless of what I've set it to be. Is this a known issue?
View 14 Replies View RelatedPhotoshop :: Pen Pressure Opacity (glitches) And Do Full Opacity Often When Try To Digital Paint
Aug 26, 2013It does it every 4-6 times which is really really often since you brush about 10 times every 3 seconds or so when digital painting especially when shading, lighting, blending, etc with brushing.
Why does it do this? I cant recall when it started doing this but I think it was either when I updated from CS4 to CS6 or maybe it just randomly kicked in. I already updated my drivers and re-installed my tablet.
CorelDRAW Graphics Suite X5 :: Transparency Settings - Change Size Of Center White Spot
Sep 14, 2012In X5 is there a way to change the size of the centre 'white' spot when using transparency or is it always proportional to the object size?
View 3 Replies View RelatedAutoDesk Smoke :: Run Flame Over VPN
Oct 27, 2013Is it possible to run Flame or Smoke over a VPN? I mean, is it possible to get a license over VPN?
Smoke 2013 Ext1
17" Mac Book Pro
OS X 10.8.5
16 GB RAM
AutoDesk Smoke :: Takes All The Available RAM
Aug 5, 2012I tried Smoke 2013 PR2 on my MacBook Air 11".
It uses all the available RAM that is 4GB.
Same experience with Smoke 2012 on my MacBook pro 13"".
Is that normal?
AutoDesk Smoke :: EXR Look Different On Import
Nov 14, 2011I have RED footage which I exported as EXR. When I import them back in, they look exactly like the RED footage. But when I import the EXR in Fusion, export it back out, and then import that EXR into Smoke, it looks brighter, although I didn't change anything in Fusion. (when I compare the EXR from Smoke and the EXR from fusion in my finder on my desktop, they look exactly the same). So what is Smoke doing with the "foreign" exr on import?I was also playing with the LUT settings. I get a result which is close, but I need to be exact.
View 6 Replies View RelatedAutoDesk Smoke :: Where To Set Context
Jun 27, 2012Where do you set context in batch in the 2013 prerelease?
View 9 Replies View Related