AutoDesk Smoke :: Verifying Integrity Of Existing Archives
Jun 17, 2013Is there a way to verify the integrity of previously created archives without loading them into Smoke?
View 1 Replies
ADVERTISEMENT
AutoDesk Smoke :: Failed Volume Integrity Check
Apr 14, 2011After lots of failed vic scripts in terminal, I finally got a vic to run (somewhat), here's the results:
Opening volume stonefs7 for integrity check ...
VOLUMEMGT : Using 7 as root partition.
Locking volume ...
Initiating integrity check ...
Extracting frames from /usr/discreet/clip/stonefs7/Viewstream/ExportIO.000.clib.
Extracted 0 frame.
Extracting frames from /usr/discreet/clip/stonefs7/Viewstream/editing.000.desk.
Extracted 0 frame.
Extracting frames from /usr/discreet/clip/stonefs7/Viewstream/Default.000.clib.
[code]....
AutoDesk Smoke :: How To Navigate Between Existing Keyframes
Sep 18, 2012I have been learning smoke 2012 (mac osx) for some days. I am FCP user, know Photoshop, Aftereffects, premiere pro etc etc..... However i have some small and big hurdles to work away smoothly with SMOKE.
1) Are MASKS available in CC (or color warper) ? ( to relight shot)
2) How to navigate between existing keyframes? (any shortcuts)
3) How to change a part of a clip.....eg. I want to replace a sky from one clip to sky of another clip...how do i go about it? (HLS key or masks etc..i have no clue)
4) In my last export (with lot of blur and motion graphics)..i was only able to export it as DPX and not as .mov file? (.mov was showing error) . Also....I always see some artifacts with my export...why does that happen?
5) Are there any SCOPES in Color corrector....for broadcast safety purpose ? (VECTOR,PARADE etc)
6) Is there any way in smoke .where i can finish and grade my SD clips so they look like HD standard. I mean even some of HD clips look substandard or lacking that vibrant,sleek look..... am i missing something while finishing them. I am not talking about increasing gain/gamma etc to make them look brighter and breach broadcast limits.Am i suppose add a light to the clip so that they look vibrant or any other trick to keep in mind, so clip look the way they should.
AutoDesk Smoke :: How To Add Small Registered Trademark To Existing Logo
Jan 7, 2013I'm trying to add a small registered trademark to an existing logo. I have the front and the matte of the logo which I take in to paint. While in paint, I add the registered trademark using the text brush within the graphics option. However, I can't seem to get the matte of the trademark and the existing matte of the logo to show up when I view the matte it's either one or the other - not together. So when I render, I'm not getting both the original logo and the trademark rendered with both mattes. For now, I've just composited the two in Action so I can move forward with my work but I would like to know how to do this in paint.
View 5 Replies View RelatedAutoDesk Smoke :: Smoke And AJA Dual Stream Stereoscopic Output
Aug 29, 2013I know that the AJA Kona 3 card has 2 outputs. Can Smoke send one eye to one channel and the other eye to the other of the Kona 3 card? Dual Stream output is what I am really getting at.
View 4 Replies View RelatedAutoDesk Smoke :: Smoke And Sub-blacks / Super-whites
Feb 26, 2013Is there any way that Smoke can see/output sub-blacks and super whites? Can't find any way of seeing them on my scope, Smoke just clamps everything. It won't even see anything below zero in order for me to make a correction on it, everything seems to be clamped on import. I'm using ProRes HQ footage.
View 9 Replies View RelatedAutoDesk Smoke :: Best Plugin To Do Spline Warps In Smoke
Jan 16, 2014What is the best plugin to do spline warps in smoke?(need something like the distort in flame) I notice revisionfx don't make a warper for smoke on mac.
View 7 Replies View RelatedAutoDesk Smoke :: Importing And Using Alpha Channels In Autodesk
Oct 2, 2012I am experimenting with Smoke 2013 pre-trial and I am having issues with importing images and video with alpha channels.
1. If I have a layered Photoshop file or png with an alpha channel (a still frame lower third), I see that I can import it as a multi layered clip, but what is the best way to have it in the sequence to show up properly?
2. If I have a QuickTime in animation format or Pro Res4444 format with an embedded alpha, how can I import that file to show and cut it on a top layer to animate above my video?
AutoDesk Smoke :: Can Smoke Support OFX Architecture
Oct 18, 2012Can Smoke support the OFX architecture?
View 1 Replies View RelatedAutoDesk Smoke :: Selections In Smoke As In Combustion?
Jul 10, 2012Does Smoke have selection functionality similar to that of Combustion? As an example, you might want to selectively blur part of an image. In Combustion, you would draw a selection and then apply an operator above the selection to achieve this. I don't see a similar selection tool function in Smoke, but I imagine you could achieve the same effect by duplicating a layer and using a Gmask via the Wipe timeline FX.does Smoke not have a selection tool similar to Combustion?
View 3 Replies View RelatedPhotoshop :: Archives In NEF Don't Open On CC
Nov 8, 2013my photos taken with my Nikon cameras (D3200 and D7100) don't open on .NEF format on Photoshop CC. The Adobe Camera Raw is updated (8.1 version) as the firmware of the cameras. I following the solutions for solving the problems write in the Adobe site (re-installed the Photoshop, delete de plug-in folder, etc), but the problem persist.The .NEF of the my old D40 camera open normally on program.
View 2 Replies View RelatedAutoDesk Smoke :: Importing TWs To Smoke
Jan 10, 2014Whats the dealing with importing TWs to Smoke? I have a show that's 70% keyframed with timewarps and need a way other then baking the effect to bring it into Smoke. It's comming from FCP7 and we have Automatic Duck but neither the XMLs or AAF bring anything other then the first speed of the clip. Any way to retain the keyframes?
View 1 Replies View RelatedAutoCAD Architecture :: Upgrade Existing Computer To Run Renders On Autodesk?
Mar 27, 2012Im currently in my second year at architecture school and have recently been learning how to render and do simple animations on autodesk. Being a poor student and only having an existing home computer, how to update my system so I would be able to run some simple renders on my computer?
I have attached an image below of my system details. My computer doesnt have a graphics card and I know I need to get that sorted.
GIMP :: Integrity Of Distorted Images
Sep 25, 2013Just started to explore gimp. Have an application for distortion effects, but need to know the following. If I create a square (jpeg) that is exactly 50% black and 50% white and then distort the image using, for example 'i warp' or 'whirl & pinch', will the colour proportions of the resultant image still be exactly 50/50?
View 2 Replies View RelatedLightroom :: How To Check Integrity Of Catalog
Mar 2, 2014Other than as part of the backup process is there a manual way to check correct integrity issues with the catalog?Lightroom 5.3 on Windows 8.1 (x64) for info.
View 2 Replies View RelatedLightroom :: 5.3 Fails Integrity Check
Jan 24, 2014I have been using LR5.3 since the update. For the past couple of weeks I've been having difficulty with backup. The error message is that it is failing the integrity check and won't backup. If I unchecked the integrity box, it does backup. If I check the integrity box it fails backup and say that the catalog is corrupt. When I restart LR, it does repair and I;m back where I began. This problem began cropping up a couple of weeks ago. I've reinstalled LR, I've done a full scan of my computer and still, it continues. I'm on Windows 7.
View 1 Replies View RelatedAutoCAD Inventor :: How To Check For Assembly Integrity
Feb 21, 2013I am working with a fellow Inventor user who faces determining if a set of assemblies, on the file system, are complete and not missing any parts, references, etc. Aside from opening each one in Inventor direclty and manually verifying if the design is at least able to resolve al parts, is there any way to automate or semi-automate this check?
View 6 Replies View RelatedAutoDesk Smoke :: Run Flame Over VPN
Oct 27, 2013Is it possible to run Flame or Smoke over a VPN? I mean, is it possible to get a license over VPN?
Smoke 2013 Ext1
17" Mac Book Pro
OS X 10.8.5
16 GB RAM
AutoDesk Smoke :: Takes All The Available RAM
Aug 5, 2012I tried Smoke 2013 PR2 on my MacBook Air 11".
It uses all the available RAM that is 4GB.
Same experience with Smoke 2012 on my MacBook pro 13"".
Is that normal?
AutoDesk Smoke :: EXR Look Different On Import
Nov 14, 2011I have RED footage which I exported as EXR. When I import them back in, they look exactly like the RED footage. But when I import the EXR in Fusion, export it back out, and then import that EXR into Smoke, it looks brighter, although I didn't change anything in Fusion. (when I compare the EXR from Smoke and the EXR from fusion in my finder on my desktop, they look exactly the same). So what is Smoke doing with the "foreign" exr on import?I was also playing with the LUT settings. I get a result which is close, but I need to be exact.
View 6 Replies View RelatedAutoDesk Smoke :: Where To Set Context
Jun 27, 2012Where do you set context in batch in the 2013 prerelease?
View 9 Replies View RelatedAutoDesk Smoke :: Exporting XML From FCP
Oct 29, 2012When I export a XML from FCP 7 all of my files come over and link but there is no video with my HDV files (1440 x 1080) all of my other files (Canon FX etc) come over fine.
View 9 Replies View RelatedAutoDesk Smoke :: HD To SD Down-conversion?
Jun 4, 2011What is the best way to downconvert 5D HD to SD?
I converted the h.264 files to uncompressed 10bit. Bringing in the footage and XML was fine, but as soon as I resize to PAL (the timeline was changed to PAL, as was the output on the AJA) the picture starts anti aliasing in detail areas. I have processed this with every filter in Smoke with no satisfactory result.
AutoDesk Smoke :: How To Import XML
Jul 7, 2013I am having issues for a long time regarding importing XML into smoke 2013. Will try and explain you in breif.
First When we try an import XML into smoke it just doesnt do anything, in the message history box it comes up saying FOUND 0 SOURCES.
Nothing gets imported at all. No footage is imported, nothing is shown in timeline as well.
Second For a different project when the XML does get imported, the videos get imported but then again nothing is coming up in the timeline and in the message history box we get the following error.
XML Validation Failed.
Cannot process unliked media.
we have checked all the import options to make this work, including max up level and the rest but nothing is working.
AutoDesk Smoke :: Better Interactivity In CFX?
Aug 16, 2013I must have changed a setting because today my interactivity in CFX has taken a hit, specifically when making Axis moves. The move doesnt register until after I have made a change in the Axis field.
I know there is a setting for this but cannot remember. Am not having the same issue grabbing Axis in viewer.
AutoDesk Smoke :: How To Conform XML From FCP 7
Jun 7, 2012I'm currently trying to conform an XML from FCP 7 into Smoke 2012 (Linux). The issue I have is that the files I want to conform with are MFX, however the files used in the FCP timeline are PRORES, therefore have a '.mov' extension. This means the Smoke is not seeing the MXF files due to the extension & the only way around it I have found, is to edit all of the '.mov' extensions to '.mxf' extensions in the actual XML. This works well, but is a complete nightmare, particularly as I'll have to do this for 13 half hour episodes!!!!
I have tried all the different combinations of Filename, Timecode, Tape, etc, but none work due to other metadata issues from the filming of the footage to it being delivered to our edit suites!!!!
Any way of making the Smoke ignore the file extension?
AutoDesk Smoke :: Deleting Fx History
Nov 22, 2012Can i remove the fx history ? for example i render a cfx clip. then i want to keep the render only and disconnect the relationship with its 'cfx history' . And is there any practical benefit of it ? You maybe will ask me : 'why do you wanna do it?' , my answer is " i don't know man, it just came across my mind .
View 3 Replies View RelatedAutoDesk Smoke :: Getting Depth Of Field
Apr 27, 2011Getting a depth of field result in Smoke 2012. A tutorial on this would be really beneficial for a new comer like me.
View 9 Replies View RelatedAutoDesk Smoke :: Can't Scroll Through Clip
May 12, 2011All of a sudden, I'm unable to scroll through clips with real time feedback. Did I turn on some preference?
Also, I've noticed that when I'm in Action, I don't get realtime feedback going to the broadcast monitor, but rather the image catches up upon pen up. I don't see anything about it in the options in Action or global preferences.
AutoDesk Smoke :: Output Resolution Of The CFX
Dec 6, 2012When applying CFX to the clip it ignores resolution of the project and the time line and creates a resolution of the whole CFX based on clip.
In other words 1080 clip in 720 timeline creates CFX with 1080 out node, ( all action creates in 1080 swell) and only then send 1080 output to timeline where it applying resize soft effect. I know i can change resolution of action, but a can't change resolution of output node ( the las node that feeds output to timeline.) Is there an easy way to work around to feed lets say 720 to escape resizing in timeline.
AutoDesk Smoke :: Where Is ProRes Output
Jul 12, 2012I'm on 2012 SP3. I'm able to import and work with ProRes 422 just fine. But when I go to output and choose Quicktime, no ProRes options appear. Do I have to set this up somehow?
View 1 Replies View Related