Is it just me or has undo gone the way of the dodo in the stabilizer module? Please can it be resurrected. It is incredibly useful for when a track goes wrong and you just want to try a different tracking point. As it stands I now have to go back into the animation channel, select shift, select delete, delete keyframes and then retrack.
View 7 RepliesI am trying to use stabilizer to smooth out a camera motion but immediately getting into problem with using stabilizer as I could not find any comprehensive manual on utilizing this feature.
I have one problematic very important clip with the uneven camera motion: camera moves at a certain rate and suddenly drops or increases in speed. It is around 5 min clip and involves some long panning with uneven rate of camera motion.
It is not shaky as the camera was on a tripod all right just the operator was a little bit drunk and spoiled the hole shot.
Anyway I spliced (cut) the lengthy clip into several segments where I could be able to find a distinguished feature to apply a tracker.
Then I applied an Axis FX through a timeline FX. In the "Axis" main menu I chose "Stabilizer". But in the Stabilizer Menu in the preview window I cannot see my video frames and there are boxes of tracker on the black background. How can I apply tracker if there is no footage seen in the window?
i have problem with auto stabilizer,analysis failed.
View 4 Replies View RelatedThe undo hot key seems flaky. Often the Mac menu based undo works, but the option + z only works sometimes. It does something, but that's not an undo.
Is this a bug? I think ESP. In certain CFX modules...
This is something that I have noticed on various systems (flame, flint, smoke). For some reason the Undo function doesnt work inside Sapphire Sparks.
Smoke 2013 Ext1
17" Mac Book Pro
OS X 10.8.5
16 GB RAM
I noticed in paint the other day there wasn't a reset all etc button or an undo redo button, now Im in the action node and don't see it either.
View 9 Replies View RelatedI can't find the undo button in Action, where did you put it?!
View 4 Replies View RelatedI've got a window to hammer the machine for a day! In an action schematic I know I can save selected nodes and media. I now want to load those saved nodes into another action but the load tab won't open to give me the options of load all, add nodes, add nodes & media.
View 3 Replies View RelatedIs there a way to offset the frame number count in the burn-in node? Also is there a way to add leading zeros?
View 4 Replies View RelatedI know that the AJA Kona 3 card has 2 outputs. Can Smoke send one eye to one channel and the other eye to the other of the Kona 3 card? Dual Stream output is what I am really getting at.
View 4 Replies View RelatedIs there any way that Smoke can see/output sub-blacks and super whites? Can't find any way of seeing them on my scope, Smoke just clamps everything. It won't even see anything below zero in order for me to make a correction on it, everything seems to be clamped on import. I'm using ProRes HQ footage.
View 9 Replies View RelatedWhat is the best plugin to do spline warps in smoke?(need something like the distort in flame) I notice revisionfx don't make a warper for smoke on mac.
View 7 Replies View RelatedI am experimenting with Smoke 2013 pre-trial and I am having issues with importing images and video with alpha channels.
1. If I have a layered Photoshop file or png with an alpha channel (a still frame lower third), I see that I can import it as a multi layered clip, but what is the best way to have it in the sequence to show up properly?
2. If I have a QuickTime in animation format or Pro Res4444 format with an embedded alpha, how can I import that file to show and cut it on a top layer to animate above my video?
Can Smoke support the OFX architecture?
View 1 Replies View RelatedDoes Smoke have selection functionality similar to that of Combustion? As an example, you might want to selectively blur part of an image. In Combustion, you would draw a selection and then apply an operator above the selection to achieve this. I don't see a similar selection tool function in Smoke, but I imagine you could achieve the same effect by duplicating a layer and using a Gmask via the Wipe timeline FX.does Smoke not have a selection tool similar to Combustion?
View 3 Replies View RelatedWhats the dealing with importing TWs to Smoke? I have a show that's 70% keyframed with timewarps and need a way other then baking the effect to bring it into Smoke. It's comming from FCP7 and we have Automatic Duck but neither the XMLs or AAF bring anything other then the first speed of the clip. Any way to retain the keyframes?
View 1 Replies View RelatedI think it'd be so cool to be able to replay your entire undo history of a picture, so you can see and show others how you proceeded on a picture you made. That way, it's never necessary to capture screen video for like 10 hours and stuff..
So first you'd need to add an option to save the undo history (so that you always keep the history from when you started). Then you'd need an option to playback the undo history.
Is there a way to undo without zoom as part of the undo?
Civil 3D 2013
Windows 7 64-bit
Inteel 2.40 GHz 8 GB RAM
Dell T7600
I have a problem understanding how undo marks are added to the undo stack.In the code below a fan of lines are draw in a random location.If you run MTest a few times, the AutoCAD Undo command will remove the fans one at a time.
If you run MMulti to draw 10 fans, the AutoCAD Undo command will remove all the fans in a single step.I want to be able to remove the fans one at a time.I thought that a StartTransaction / Commit pair would act as markers for the undo stack, but this isn't working.
Tested on AutoCAD 2010 VS 2008
<CommandMethod("MMult")> _
Sub testmult()
Dim i As Integer
For i = 1 To 10
Call testdraw()
Next
End Sub
[code]....
Is it possible to run Flame or Smoke over a VPN? I mean, is it possible to get a license over VPN?
Smoke 2013 Ext1
17" Mac Book Pro
OS X 10.8.5
16 GB RAM
I tried Smoke 2013 PR2 on my MacBook Air 11".
It uses all the available RAM that is 4GB.
Same experience with Smoke 2012 on my MacBook pro 13"".
Is that normal?
I have RED footage which I exported as EXR. When I import them back in, they look exactly like the RED footage. But when I import the EXR in Fusion, export it back out, and then import that EXR into Smoke, it looks brighter, although I didn't change anything in Fusion. (when I compare the EXR from Smoke and the EXR from fusion in my finder on my desktop, they look exactly the same). So what is Smoke doing with the "foreign" exr on import?I was also playing with the LUT settings. I get a result which is close, but I need to be exact.
View 6 Replies View RelatedWhere do you set context in batch in the 2013 prerelease?
View 9 Replies View RelatedWhen I export a XML from FCP 7 all of my files come over and link but there is no video with my HDV files (1440 x 1080) all of my other files (Canon FX etc) come over fine.
View 9 Replies View RelatedWhat is the best way to downconvert 5D HD to SD?
I converted the h.264 files to uncompressed 10bit. Bringing in the footage and XML was fine, but as soon as I resize to PAL (the timeline was changed to PAL, as was the output on the AJA) the picture starts anti aliasing in detail areas. I have processed this with every filter in Smoke with no satisfactory result.
I am having issues for a long time regarding importing XML into smoke 2013. Will try and explain you in breif.
First When we try an import XML into smoke it just doesnt do anything, in the message history box it comes up saying FOUND 0 SOURCES.
Nothing gets imported at all. No footage is imported, nothing is shown in timeline as well.
Second For a different project when the XML does get imported, the videos get imported but then again nothing is coming up in the timeline and in the message history box we get the following error.
XML Validation Failed.
Cannot process unliked media.
we have checked all the import options to make this work, including max up level and the rest but nothing is working.
I must have changed a setting because today my interactivity in CFX has taken a hit, specifically when making Axis moves. The move doesnt register until after I have made a change in the Axis field.
I know there is a setting for this but cannot remember. Am not having the same issue grabbing Axis in viewer.
I'm currently trying to conform an XML from FCP 7 into Smoke 2012 (Linux). The issue I have is that the files I want to conform with are MFX, however the files used in the FCP timeline are PRORES, therefore have a '.mov' extension. This means the Smoke is not seeing the MXF files due to the extension & the only way around it I have found, is to edit all of the '.mov' extensions to '.mxf' extensions in the actual XML. This works well, but is a complete nightmare, particularly as I'll have to do this for 13 half hour episodes!!!!
I have tried all the different combinations of Filename, Timecode, Tape, etc, but none work due to other metadata issues from the filming of the footage to it being delivered to our edit suites!!!!
Any way of making the Smoke ignore the file extension?
Can i remove the fx history ? for example i render a cfx clip. then i want to keep the render only and disconnect the relationship with its 'cfx history' . And is there any practical benefit of it ? You maybe will ask me : 'why do you wanna do it?' , my answer is " i don't know man, it just came across my mind .
View 3 Replies View RelatedGetting a depth of field result in Smoke 2012. A tutorial on this would be really beneficial for a new comer like me.
View 9 Replies View RelatedAll of a sudden, I'm unable to scroll through clips with real time feedback. Did I turn on some preference?
Also, I've noticed that when I'm in Action, I don't get realtime feedback going to the broadcast monitor, but rather the image catches up upon pen up. I don't see anything about it in the options in Action or global preferences.