AutoDesk Smoke :: Modular Keyer And Caching
Mar 13, 2013
When using the Modular Keyer, either in a CFX or in Action, I have yet to be able to figure out a way to see the CFX result anywhere. I can only see the front/mattes/output of the MK. Needless to say, this makes roto-ing fairly cumbersome with downstream effects.
Also: Is there a way on the 2013 Mac version to 'cache' a node like there is with the orange dot in the Linux version? Render times are already pretty rough and I am hoping there is a way to optimize them.
View 9 Replies
ADVERTISEMENT
May 23, 2013
when I add a modular keyer to any clip and try to add a G-Mask from the G-Mask node; no "Add" button appears in the interface. So I can't add a mask to a comp. What am I missing here?
View 2 Replies
View Related
May 29, 2012
for example, duplicate Man layer, rotate & decrease transparency for reflection fx, how to composite this?
View 2 Replies
View Related
Jan 12, 2014
when caching .png sequences it happens a lot that some portions of the clip are not being cached. Or at least some frames are still pointing to the original .png's so that playback stutters.
This happens both in a normal HD project, but a lot on a current UltraHD 60p project on the proxy-generation (set to 50%). A workaround is adding an effect, render it and commit the clip. But this is not suitable on the big 60p project.
Observing the percentage counter in the lower left corner gives me the strange suspicion that it is happening to those portions of the clip which are being cached during the autosave process. There are a lot of them. Converting is not an option. Mac and storage are fast enough.
View 6 Replies
View Related
Dec 4, 2012
is it possible to stabilize a shot within the Modular Keyer in Action?
View 3 Replies
View Related
Feb 13, 2013
I've been running the trial for a week with no problems importing and caching media in ProRes 422. Today when I booted up smoke I attempted a similar practice run with importing some random clips and playing around again and noticed that nothing was getting cached. When I clicked import it said it could not connect to backburner on port 0.
There appear to be a couple of threads regarding this issue where people lose the ability to cache media or export using backburner. I followed a thread posted here: [URL] ....
I tried restarting backburner, restarting the mac, reinstalling smoke and attempted the "clean install" script that is listed in the article above. After I performed the terminal commands and reinstalled Smoke, it connects to backburner but now in the jobs tab/backburner manager says it is waiting (occasionally switches to "busy" for a second or two).
Here's the error I get in backburner manager:
Matthews-MacBook-Pro.local 1946321280 swBIOSubJobServer.C:385 02/13/13:16:23:24.347
1946321280 swBIOAdapter.C:454 02/13/13:16:23:25.403 Cannot process tasks 0... in /var/tmp/WireJob/SubJob0
Unimplemented feature while reading source frames
I'm running Smoke on an internal SSD and my framestore is also on an internal HDD, but I can't imagine that's an issue since I had already successfully imported media before.
I also attempted to export a sequence of soft imported footage (also failed). The error is below:
Matthews-MacBook-Pro.local 2893642280 transcoderMediaProvider.C:312 02/13/13:16:56:30.268 Cannot get type of clip IFFFS-16:/stonefs7/Stinkzone/workspace/Media Library/_Export_130213_165628_1/H_16777343_S_1360792589_U_170633/hires: Project Stinkzone not found
View 1 Replies
View Related
Jun 6, 2013
I have just installed Smoke Ext 1 and tried Keying with Green Screen Footage. The Master Keyer result is not even close. Is it a bug with the Master Keyer?
View 1 Replies
View Related
Mar 27, 2013
Although rendering seems to work when I try to import media with cache media selected and link to source media unselected the jobs queue just shows the status 'waiting' on the imported clips.
View 9 Replies
View Related
Aug 29, 2013
I know that the AJA Kona 3 card has 2 outputs. Can Smoke send one eye to one channel and the other eye to the other of the Kona 3 card? Dual Stream output is what I am really getting at.
View 4 Replies
View Related
Feb 26, 2013
Is there any way that Smoke can see/output sub-blacks and super whites? Can't find any way of seeing them on my scope, Smoke just clamps everything. It won't even see anything below zero in order for me to make a correction on it, everything seems to be clamped on import. I'm using ProRes HQ footage.
View 9 Replies
View Related
Jan 16, 2014
What is the best plugin to do spline warps in smoke?(need something like the distort in flame) I notice revisionfx don't make a warper for smoke on mac.
View 7 Replies
View Related
Oct 2, 2012
I am experimenting with Smoke 2013 pre-trial and I am having issues with importing images and video with alpha channels.
1. If I have a layered Photoshop file or png with an alpha channel (a still frame lower third), I see that I can import it as a multi layered clip, but what is the best way to have it in the sequence to show up properly?
2. If I have a QuickTime in animation format or Pro Res4444 format with an embedded alpha, how can I import that file to show and cut it on a top layer to animate above my video?
View 7 Replies
View Related
Oct 18, 2012
Can Smoke support the OFX architecture?
View 1 Replies
View Related
Jul 10, 2012
Does Smoke have selection functionality similar to that of Combustion? As an example, you might want to selectively blur part of an image. In Combustion, you would draw a selection and then apply an operator above the selection to achieve this. I don't see a similar selection tool function in Smoke, but I imagine you could achieve the same effect by duplicating a layer and using a Gmask via the Wipe timeline FX.does Smoke not have a selection tool similar to Combustion?
View 3 Replies
View Related
Jan 10, 2014
Whats the dealing with importing TWs to Smoke? I have a show that's 70% keyframed with timewarps and need a way other then baking the effect to bring it into Smoke. It's comming from FCP7 and we have Automatic Duck but neither the XMLs or AAF bring anything other then the first speed of the clip. Any way to retain the keyframes?
View 1 Replies
View Related
Dec 26, 2012
installing a 64GB SSD as a caching disk to my 750GB using Intel Smart Response.
So, I installed my SSD, configured windows to recognize RAID and configured Intel's Rapid Storage to use my new SSD as a caching drive. After that, I had to reactivate windows, which was expected, and I had to reinstall Paint Shop Pro X4, which was not.
Right after reinstalling, the software worked ok, installed SP2 and SP3, all fine. After a reboot... nothing, the error indicating that my copy was damaged or illegally modified showed up again. So... reinstall... SP2... SP3... ok! Reboot...
I noticed that the protexis licensing was running, and tried to restart it, and Paint Shop worked! Reboot.. run PSP... error... restart service... ok!!
*** SOLUTION ***
Changing the starting method of the protexis service from "Automatic - delayed" to "Automatic" made the trick for me!
View 1 Replies
View Related
May 27, 2012
I'm trying to remove a white background from a logo image.
View 6 Replies
View Related
Oct 27, 2013
Is it possible to run Flame or Smoke over a VPN? I mean, is it possible to get a license over VPN?
Smoke 2013 Ext1
17" Mac Book Pro
OS X 10.8.5
16 GB RAM
View 1 Replies
View Related
Aug 5, 2012
I tried Smoke 2013 PR2 on my MacBook Air 11".
It uses all the available RAM that is 4GB.
Same experience with Smoke 2012 on my MacBook pro 13"".
Is that normal?
View 2 Replies
View Related
Nov 14, 2011
I have RED footage which I exported as EXR. When I import them back in, they look exactly like the RED footage. But when I import the EXR in Fusion, export it back out, and then import that EXR into Smoke, it looks brighter, although I didn't change anything in Fusion. (when I compare the EXR from Smoke and the EXR from fusion in my finder on my desktop, they look exactly the same). So what is Smoke doing with the "foreign" exr on import?I was also playing with the LUT settings. I get a result which is close, but I need to be exact.
View 6 Replies
View Related
Jun 27, 2012
Where do you set context in batch in the 2013 prerelease?
View 9 Replies
View Related
Oct 29, 2012
When I export a XML from FCP 7 all of my files come over and link but there is no video with my HDV files (1440 x 1080) all of my other files (Canon FX etc) come over fine.
View 9 Replies
View Related
Jun 4, 2011
What is the best way to downconvert 5D HD to SD?
I converted the h.264 files to uncompressed 10bit. Bringing in the footage and XML was fine, but as soon as I resize to PAL (the timeline was changed to PAL, as was the output on the AJA) the picture starts anti aliasing in detail areas. I have processed this with every filter in Smoke with no satisfactory result.
View 5 Replies
View Related
Jul 7, 2013
I am having issues for a long time regarding importing XML into smoke 2013. Will try and explain you in breif.
First When we try an import XML into smoke it just doesnt do anything, in the message history box it comes up saying FOUND 0 SOURCES.
Nothing gets imported at all. No footage is imported, nothing is shown in timeline as well.
Second For a different project when the XML does get imported, the videos get imported but then again nothing is coming up in the timeline and in the message history box we get the following error.
XML Validation Failed.
Cannot process unliked media.
we have checked all the import options to make this work, including max up level and the rest but nothing is working.
View 6 Replies
View Related
Aug 16, 2013
I must have changed a setting because today my interactivity in CFX has taken a hit, specifically when making Axis moves. The move doesnt register until after I have made a change in the Axis field.
I know there is a setting for this but cannot remember. Am not having the same issue grabbing Axis in viewer.
View 2 Replies
View Related
Jun 7, 2012
I'm currently trying to conform an XML from FCP 7 into Smoke 2012 (Linux). The issue I have is that the files I want to conform with are MFX, however the files used in the FCP timeline are PRORES, therefore have a '.mov' extension. This means the Smoke is not seeing the MXF files due to the extension & the only way around it I have found, is to edit all of the '.mov' extensions to '.mxf' extensions in the actual XML. This works well, but is a complete nightmare, particularly as I'll have to do this for 13 half hour episodes!!!!
I have tried all the different combinations of Filename, Timecode, Tape, etc, but none work due to other metadata issues from the filming of the footage to it being delivered to our edit suites!!!!
Any way of making the Smoke ignore the file extension?
View 2 Replies
View Related
Nov 22, 2012
Can i remove the fx history ? for example i render a cfx clip. then i want to keep the render only and disconnect the relationship with its 'cfx history' . And is there any practical benefit of it ? You maybe will ask me : 'why do you wanna do it?' , my answer is " i don't know man, it just came across my mind .
View 3 Replies
View Related
Apr 27, 2011
Getting a depth of field result in Smoke 2012. A tutorial on this would be really beneficial for a new comer like me.
View 9 Replies
View Related
May 12, 2011
All of a sudden, I'm unable to scroll through clips with real time feedback. Did I turn on some preference?
Also, I've noticed that when I'm in Action, I don't get realtime feedback going to the broadcast monitor, but rather the image catches up upon pen up. I don't see anything about it in the options in Action or global preferences.
View 2 Replies
View Related
Dec 6, 2012
When applying CFX to the clip it ignores resolution of the project and the time line and creates a resolution of the whole CFX based on clip.
In other words 1080 clip in 720 timeline creates CFX with 1080 out node, ( all action creates in 1080 swell) and only then send 1080 output to timeline where it applying resize soft effect. I know i can change resolution of action, but a can't change resolution of output node ( the las node that feeds output to timeline.) Is there an easy way to work around to feed lets say 720 to escape resizing in timeline.
View 2 Replies
View Related
Jul 12, 2012
I'm on 2012 SP3. I'm able to import and work with ProRes 422 just fine. But when I go to output and choose Quicktime, no ProRes options appear. Do I have to set this up somehow?
View 1 Replies
View Related
