AutoCad :: Can Control Name Of A Block That Is Generated By Using Command
Aug 31, 2012Is there a way i can control the name of a block that is generated by autocad when using things like to section plane command or flatshot command?
View 6 Replies
ADVERTISEMENT
AutoCAD 2013 :: Dimensioning Views Generated With Viewbase Command?
May 9, 2012Is there a way to get proper dimensioning when generating views with the"Viewbase" command. I get erroneous results when using the dimordinate and dinbaseline commands with these views.
View 6 Replies View RelatedAutoCAD Architecture :: Command Line Reads No Space Generated
May 16, 2008I have a room with a cathedral-style ceiling. I'd like to create a freeform space. What's the secret? I've changed the properties from extruded to free form, and then selected the boundaries (floor slab, ceiling slabs & walls), then hit "G" to generate the space. The command line reads no space generated.
View 2 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Control UCS Without Using Command Line?
Nov 9, 2012Is it possible to control the UCS without using the command line? I'd like to access it and control it with vlisp much the same way I can access DXF groups and manipulate insertions. Seems like it should be possible to play with it's definition inside the object model.
View 5 Replies View RelatedAutoCAD 2013 :: Control Array Within A Block
Nov 20, 2013I wish to control an array within a block (see jpg). Basically, I have a series of circles which I want to fix to Distance1. I want to control the distance between the circles with an expression called 'centers' (say 80mm). When I change the length of Distance1 in the Properties-tablet to say 600-mm, I want the array to follow the dimension.
When I select the array, the fx button next to the column distance on the array-tablet is greyed out. If I were using Revit, I would apply a dimension and give it a label which I would manipulate in the identity-table. What should I do in AutoCAD to achieve the same result?
AutoCad :: Control Orientation Of Dynamic Block?
Jul 26, 2013I have been working with dynamic blocks - windows and doors - and I have trouble getting them into the right orientation and keeping them there.
My major problem is that when I try to move the hinge of the door to the door jamb the block orients itself any way it wants to go.
AutoCAD 2010 :: Block Control In Reference Drawing?
Jul 29, 2011 I'm using Architecture 2011, but the problem is pretty generic.
I am working with a very complex vendor drawing and using it as an xref to my working drawing. I need to be able to freeze parts of the xref and change colors (for plotting purposes) of other parts. Under ideal circumstance this would require simple layer manipulation.
My problem is that a large percentage of the vendor drawing is made up of blocks. There are nearly 1000 different blocks. Most of these blocks were created using layers other than 0 - quite often more than one layer is used. Sometimes the block is inserted on a layer that was used in it's creation, sometimes not. The only way I can omit one of these blocks from my drawing is to figure out what layer was used in it's creation and freeze that layer. You can see how this could be a pretty tedious process.
My limited CAD knowledge only gives me: edit all 1000 blocks, changing them to layer 0
AutoCad 2D :: Control Distance Of Array In Dynamic Block?
Oct 16, 2011Am I missing something or is there no way to control array action spacing with formulas or user parameters?
View 3 Replies View RelatedAutoCad :: Control Draw Order Of Objects Created Within Array In Dynamic Block?
Jul 11, 2012how to control the draw order of objects created within an array in a dynamic block?
I have a wipeout, which works fine on the array source, but when the array produces babies, it places them infront of everything (which is only logical), making the wipeout useless.
Can I set array babies to have the same draw order as their parent?
(AutoCADLT 2013)
AutoCad :: Replace Block Command?
Sep 6, 2012I remember on a pc i was using once upon a time, AutoCAD had a command called replace block. the shortcut was 'RB' and you could replace a block with another one very easily.
View 2 Replies View RelatedAutoCad :: Editing Name Of Block Without Using Rename Command?
Mar 28, 2008How can you edit the name of a block without using the rename command.
What if your drawing has over fifty blocks, and your chasing the renaming of just one block?
Would this be a script type solution.. ?
AutoCad :: Explode Command Delete The Block
Jan 31, 2012At my job, we are 15 drawers using acad 2008 and 2006. For some reson, on 1 computer, when the guy explode a block, acad delete that block insted exploding it. It make the just for some block, not all block. It make this with acad 2006 and acad 2008 but just with that computer.
View 4 Replies View RelatedAutoCad :: Dynamic Block And Divide Command
Feb 24, 2012My work requires me to create programs for our CNC router. It is done in AutoCAD 2008. To making programs faster I've created series of dynamic blocks. I am attaching a file with one of those blocks.
The file is actually illustrating what I need to do number of times a day. I would like to make the process even faster and more fool-proof. The "old way" in file shows what my current way of creating programs. The "new way" is my attempt to make it faster.
My problem is automatically dividing a line in dynamic block into a variable number of segments that are always equal. Naturally I use divide command after I stretch and explode my dynamic block. It would be much faster if the block would be able to do it all by itself.
My attempt of solving this was to use Visibility Parameter. However, if you look closely at it, you'll notice that if I want to do it for all the possible combinations it will be extremely complicated and easy to mess up.
If only there was a way to have two visibility parameters. Then I'd make one for horizontal holes and another for vertical. Unfortunately I can't.
How to accomplish this? LISP, maybe? Unfortunately, I don't know LISP.
AutoCAD .NET :: Command For Insert Block With File Name?
Mar 22, 2012the command for Insert block with file name.
using .net code (SendStringToExecute)
AutoCAD 2010 :: Block Edit Command Not Working
Jul 31, 2012I am running autocad 2012 and my block edit command is not working. im getting the following response:
View 2 Replies View RelatedAutoCAD .NET :: Run Command On Double Click Block With Specific Name?
Feb 26, 2013I wrote a couple of functions one of them creates a block with a Name let say "MyBlock".
I wrote a command "MyBlockEdit" where the selected block attribute data is displayed in a custom form to change some of the properties.
Now I want to add the folowing function:
When a block with the blockname "MyBlock" is doubleclicked the command "MyBlockEdit" is triggered in place of the attribute editor.
AutoCad :: Block Properties Change With Array Command
Mar 7, 2013Im a user of Autocad 2012 but in the new array command of autocad 2012 , when a block is arrayed the entire array acts as one unit and all the objects in it move together . This can be changed by exploding the arrayed objects and i can move the objects individually but when this is done my block properties are lost...Auto cad renames this block and no longer identifies as my old block.
How can i retain my block properties whilst using the array command in autocad 2012!
AutoCad :: Command To Fit Title Block To A Drawing In Layout?
Nov 30, 2013Is there any command to fit or re-size a title block to A drawing in the layout?
View 4 Replies View RelatedAutoCad 3D :: Apply Stretch Command To Pipe Block?
Jul 10, 2012im creating some 3d pipe blocks but im stumped on a block for a straight pipe. Basically I want to beable to apply the stretch command to a 3d pipe block which has the internal bore removed so its a hollow tube. I want to be able to have it as a block but also the be able to stretch it at either end.
View 9 Replies View RelatedAutoCAD 2010 :: Block Swap Command Error?
Mar 27, 2012I am running Autocad 2012 and I tried to use the block swap command under the Express Tools. After selecting the block that I want to replace, I get an error stating that the block name contains an invalid character. The name contains invalid characters. The name is: DomeCamera_WallMount, but in the command bar it says object name:*U302. The * is what Autocad doesn't like.
View 5 Replies View RelatedAutoCAD 2013 :: Match Properties Command Outside Reference / Block?
May 18, 2012When I'm into reference edit mode (REFEDIT) I can make match properties command also on objects which are not in working set - this was not possible to do before and it is pretty annoying. Is this a bug or some new function, hopefully turnable on/off?
Also I never understood, why is not possible to copy anything from reference edit mode, but it is possible to paste into, also there are no problems in Block editor mode? It seems to me like artificial set limit with no obvius explanation why would that be good especially when I see that it is possible to match properties on outside objects.
AutoCAD Inventor :: Macro-command To Change Title Block In IDW
Feb 11, 2004Is there any macro-command to do this :
"Open the .idw that you created your title block in. Locate and right click on your title block in "drawing resources". Select copy. Open the file that you want to put your title block in. Right click on "drawing resources" and paste your title block there. Now you will have to delete their title block and then activate yours. "
I want to change my drawing template and I have many to do and it must have somewhere somehow a way to do this automatically?
AutoCad :: Join Command On Object Before Making It Into Dynamic Block?
Nov 26, 2012Do you need to use the join command on an object before making it into a dynamic block? I have these stairs I need to scale down to fit my floorplan, but when I place grips on it in order to scale them down, I can only scale of the block while the rest becomes totally distorted.
View 3 Replies View RelatedPaint Shop Pro :: X4 - Block Size Control To Local Tone Mapping Adjustment?
Oct 22, 2011From X3 to X4, Corel added a "Block Size" control to the Local Tone Mapping adjustment. Is it the number of pixels over which the contrast adjustment is being applied? It seems that the smaller block sizes reduce the effect's harshness (when it could be harsh, e.g., with faces).
Checked the manual and they forgot to mention it.
AutoCAD Visual LISP / AutoLISP :: Inserting Block With Insert Command?
Mar 27, 2012I am working on a lisp file that lets you select a block and automaticaly change the layer and color in block editor. Afther this it exits block editor, deletes the original block and places the new one.
It works fine accept for the last part.
When i incert my new name whit the insert command it automaticaly changes the name whit autofil so it wil still pot my originial block (the new block name is only two characters shorter than the old one).
AutoCAD Architecture :: Cannot Change Dynamic Block Properties At Command Line
Jul 24, 2012I have created a library of dynamic blocks in AutoCad10. When I craeted them I could click on the Grip for a Linear Parameter that was associated with a Stretch Action and the current value would be displayed (Example: The width of a block). I could type in a new value and the block would stretch to that value. Something changed this week when I attempted to use my blocks. When I click on the Grip no dimension is displayed. The command line shows "Specify point location or [Base point/Undo/Exit]". I can drag the grip to change my block but I cannot simply type in a new dimension as before.
View 2 Replies View RelatedAutoCad :: Master Block Command That Can Auto Update Other Blocks In DWGs?
Jul 31, 2012I'm looking for an option to keep master or source blocks together in one file that when changes need to be made I can just update them once and those changes reflect immediately in drawings containing said blocks. I had thought that the wblock command was used for this but it seems to just be another way to insert blocks similar to the design center.
View 9 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Routine Measure Command And Block Attribute Value?
Nov 28, 2011I am trying to create a lisp that prompts you to select multiple lines, and then prompts to enter a name of a block you wish to use. With that information use the measure command to place the entered block along the selected lines with the spacing set to the value in the blocks attribute.
I have a lisp that does most of this with the exception of the extracting the value of the block size to use as the distance between blocks, the current lisp just prompts for the distance.
I have a lot of blocks with different spacing so it is hard to remember the distance.
Here is the current Lisp i use:
(defun c:MEB (/ blk ss l name)
; TharwaT 04. 04. 2011
(if
[Code].....
AutoCAD 2013 :: Control Print Line Weights On Feature Control Frames?
Nov 8, 2012Using AutoCAD 2013 and TOL command to generate feature control frames. We set our lineweights based on layer assignments.
Problem is that when printing, AutoCAD seems to randomly assign a lineweight to the feature control frames. It can vary from what it's supposed to be (such as lineweight set for the dimension layer) or thicker than even what the object lines are set at. Seems to pick a random linewieght at time of printing for these elements (just the boxes, not the symbols/text itself).
Is there a setting we should be defining somewhere to force it to follow the lineweight of the layer that it has been assigned to? Known bug?
AutoCAD Visual LISP / AutoLISP :: Write Event Handler For Command Like Insert New Block?
Jul 19, 2012Is it possible to write an event handler for an autocad event/ command like insert new block? I want the event to trigger the execution of an update routine . something like this post
[URL]
how do I access the autocad object in autolisp?
AutoCAD 2010 :: Block Command Doesn't Work - Crosshairs Instantly Turn Into Windows Arrow
Aug 19, 2010Why my Block command does not work anymore?
I type in the command ( I'm an old school typer, hate the buttons ) BLOCK....then the next thing that happens is (after hitting enter of course), my crosshairs instantly turn into the Windows arrow.
I wasn't playing with any switches. I was just trying to make a little block with a number in it.
Yes, I restarted AutoCAD, restarted the computer, did not reload in AutoCAD.....AutoCAD 2011 by the way.
I run Windows 7 Home Premium 64bit.
I have to do a WBLOCK to make the blocks I need to bypass this odd behavior.