AutoCad :: Text Based On Parameters / Dimensions
Nov 14, 2011
Is there anyway to generate text based on other dimensions or parameters stored in the parameters manager?
For instance, if I have a line that is 3" long, I'd like to have a note that says 'This line is 3"'. Or, if a circle is X feet in diameter, I'd like to have a note that says 'This circle is X feet'. These are just examples, but I hope you get what I'm saying.
I'm using the new parametric modeling and doing some amazing stuff, but I'd like to parametrize my notes, too, if at all possible.
View 1 Replies
ADVERTISEMENT
Dec 19, 2012
make a LISP that will work with my room dimensioning? I'd like to be able to specify the width and depth of the room using a command similar to the "dist" command, and then click a point to place a text based on the distances gathered. I'd also like the text to be formated into architectural units and displayed like this: 12'-0" X 13'-5". Also, if possible, round the result to the nearest inch (to avoid 1/2" and 1/4" dimensions).
View 9 Replies
View Related
Dec 20, 2013
I found the topic by typing "expressions" but it doesn't pass me to there.
Any shortcut to the in built formulas and allowed expressions in parameters and dimensions?
View 1 Replies
View Related
Mar 2, 2011
I have come to a road block, I am for a lost of how to connect the information that i type into textboxs and to change the values of dimensional constraint parameters ex. d1 d2 d3
View 4 Replies
View Related
Aug 2, 2012
We used a bespoke program to convert our drawings to Java applets for web usage. This does not cope with dynamic blocks at present and we have started to receive drawings from our clients using them.
I need to replace this with standard static blocks based on one of two criteria. Either:
1) Replace based on visibility state (have generic chair block with multiple different chair types set by visibility type, need to replace depending on which type it is set as)
2) Replace based on parameter (have table with size set by dimensions, need to replace with static block for each dimension)
View 0 Replies
View Related
Apr 29, 2012
I am finally getting time to do some organizational cleanup and management with our templates and vault settings. Many of the things are items that I am altering for each drawing/model I make and I would like to make them "stick" for the company standards. Things like altering font size in the styles library, adding part dimensions to the parameters for the parts list, and creating a new content central library where our part numbers are already populated for the parts list and the structural shapes have datum planes in the middle rather than just at beginning and end.
Inventor Premium 2013 SP1.1
Vault 2013- plain vanilla version
HP G71 notebook
celeron cpu w 4gb RAM and 64 bit system
Win 7 home premium
View 2 Replies
View Related
Mar 27, 2013
I have an ipart which is being controlled by an external spreadsheet. Each cell references a cell within a spreadsheet on my local drive. I have a set a parameters that are used to completely define each part but I am also interested in some of the reference parameters (from driven dimensions) so that I can analyze relationships between reference and input parameters. Is it possible (without extensive programming in windows VB or other) to export data from this iPart into, prefereably, the driving spreadsheet or another spreadsheet?
View 3 Replies
View Related
Apr 17, 2013
I'd like to either use Grid view sorted by dimensions, or create a Collection based on dimensions. I can do this in Adobe Bridge, but thought Lightroom would add functionality to this.
View 28 Replies
View Related
Jun 24, 2013
I have some manufacturing dimensions that are an end result of my design so they are driven dimensions at the end of my modeling history and pulled into the ipart table. If I make some design changes I need these dimensions to update too. The problem is they do not automatically update and require a manual activation of each child memeber for the dimension to update.
The dreaded "The Values in the active row don't match the document's current values. do you wish to update the table before continuing" Click, enter, Click, enter, Click, enter.
Autodesk Inventor 2012 Certified Assosicate
Autodesk Inventor 2012 Certified Professional
View 1 Replies
View Related
Feb 19, 2012
I'm trying to finally utilize iLogic and all of its functionality (after using the basic features of inventor for the past 3 or so years) and I was wondering if there was a way to use iLogic (or some other feature for inventor) to resize text in a title block field of an IDW based on the length of the text entered (i.e. if the part's name was "Cam Retainer" the text height would be .12, but if its part name was "Spacer Cam Retainer Bushing" the text height would shrink down to .085 or something) so that it would still fit nicely into the text block?
View 3 Replies
View Related
May 17, 2011
I'm trying to select all Text-based items (Text,Mtext and Attribute References) in a drawing to check to see if they match a pattern in a regular expression. Although i have a block with an attribute in the drawing and the selection filter consisting of
DxfCode.Operator, "<OR"
DxfCode.Start "ATTRIB"
DxfCode.Start "TEXT"
DxfCode.Start "MTEXT"
DxfCode.Operator, "OR>"
It isn't picking up the attribute Reference in the block.
Is there a workaround using the Editor.SelectAll method and not having to programmatically check each block's attributes? I'm using AutoCAD 2009.
View 2 Replies
View Related
May 2, 2011
My firm worked on a project recently with a sheet numbering system that created long sheet numbers, ie, MH-101-R1. Since the sheet numbers were so long, they no longer fit in our normal sheet/detail/drawing label blocks. (See attached DWG for an example.)
We are looking to create either a dynamic block or some kind of block that will automatically stretch with the text length.
View 4 Replies
View Related
Apr 17, 2012
Is there a way to constrain a few objects to an attribute text box width? I want the background box and line to stretch, based on what is typed in that attribute box.
I know that if I make the attribute, a multi-line attribute, I can add a backgroud mask. I don't want to take this route, because the mask boundary varies, depending on what character is typed. Also, there is a gap between the mask and line I would like to maintain.
I tried some constraint stuff, but all I seem to be able to constrain is the insertion point of the text box, and not the width grip...
View 1 Replies
View Related
Jan 20, 2012
I need a command line based text editor for scripts. Textedit wants to use an in place editor. Switching DTEXTED does not make a difference.
LT, C3D 2005 - 2014
XP, Vista, 7
View 9 Replies
View Related
Oct 25, 2012
I am using AutoCad 2012, with CADDUCT. On my runs of duct that go vertical, I like to stack my tag numbers beside the riser in order, so our installers can easily identify the order without a ton of section views. I am trying to figure out a macro that will do numerous things. Since my tags come out at different rotation angles, I would like to do the following commands.
Rotate object text "TAG #" to 0 degrees
move object text "TAG #" to "Snap from" & "snap insert" 6" below the tag above it
I want the numbers to align by their insert locations up and down the page, and exactly 6" on center vertically from one another. The tag numbers have a node justified to the center up and down of the text.
View 6 Replies
View Related
Jan 9, 2013
Is there any way of exporting text parameters from an assembly to individual parts without using i Logic? I am also unable to import text parameters to a . I am from an excel file.
We are currently using ilogic to change part text parameters from the assembly but it is a sticking plaster at best, as the rules need to be rewritten when parts are added and deleted from the assembly. We are trying to update our etched job number (which in many cases contains letters) from a single point on the assembly model which should populate all part files, and make it robust for all our CAD users, who do not use iLogic in their day to day duties.
If this is not possible (exporting text parameters the same way numerical parameters are handled) is there any plans of getting this included in upcoming versions?
View 1 Replies
View Related
Jul 18, 2005
Is there a way to create user parameter as TEXT Paramters does not accept the text paramaters . we always have tor create parameters as numbers.
View 9 Replies
View Related
Nov 25, 2010
I have some similar flat sheet parts defined as an ipart. I want to cut a text string, specific to that part variation, out of each part with a stencil font. I was hoping to use the new 2011 text parameter and some geometry text to cut out some different text from each part by either putting the text in the iPart table or using a multi-value text parameter and the part id (0,1,2,3 etc). However, geometry text doesn't seem to allow text parameters (which is odd as its the most natural use for a text parameter IMHO).
For extra bonus points: While trying 101 variations to accomplish this I found btw that iLogic rules don't seem to work for iParts (i.e. they're greyed out). Is this right?
Also, geometry text doesn't work for splines, ellipses etc?
View 9 Replies
View Related
Jun 9, 2010
I know that in Inventor 2011 you can add text to your IDW and insert numeric parameters from Parts in an Assembly, BUT what I would like to do is insert parameters that contain text. Ideally I would to just pull the parameters from from the Assembly and place them as Text in the IDW.
I can pull the parameters from the Assembly into the IDW using iLogic, but I still can't insert them in text.
View 5 Replies
View Related
Jun 7, 2011
I am trying to enter some material ordering info into an external spreadsheet, and have that info reflected in a text box within an idw drawing file.
My method is as follows:
Obtain a numerical value (250) from an external Excel spreadsheet (sample.xlsx).Assign this value to a parameter (abc) in an idw file (Materials Ordering.idw).Insert parameter abc I made into a text box within the same idw file.
I made a set_parameters rule, and the ilogic text of the above example is as follows:
'Open File and Scan line - Part = Impeller Casing Flange
i = GoExcel.FindRow("sample.xlsx", "Sheet1", "Part", "<=", "Impeller Casing Flange")
'abc = Material Width
abc = GoExcel.CurrentRowValue("Material Width")
I had no problems with the first two steps, after checking the parameters I could see that parameter abc is being updated successfully.
However, I am having trouble with the third step. In the format text dialog box, I can see a drop box for components, but I can't find a reference to the idw file in there.
My question is, am I going the wrong way about this? Should I have assigned the parameters to a component instead of the idw file?
View 5 Replies
View Related
Nov 27, 2012
I have several name plates which are embossed, and only the description changes from job to job, but find it a nuisance having to go into the part,edit sketch then edit text! each time I want to change the description .
I was initially going to get round this by creating a form and linking it to the text parameter! But for some reason it won't take in the text parameter I created and will only find and take in numerical parameters?
Is there any way around this? I know it is possible in inventor 2013. I am currently working with Inventor professional 2012.
View 2 Replies
View Related
Apr 15, 2013
I'm creating an iPart for Content Centre authoring. I have an Emboss feature that I would like to cut 2 text values into a face. I'm having trouble figuring out how to acheive this through the iPart table. I started by making 2 User Parameters multi-value but came to an abrupt halt as I can't see them in the Table. And I suspect that this approach won't work anyway.
Windows 7 x64 -64 GB Ram, Intel Xeon E5-1620 @ 3.6 GHz
ATI FirePro V7800 2 GB, 180 GB SSD & 1 TB HDD, Inv R2013 PDS Premium SP2 Update 3 (Build 200), Vault 2013 Workgroup Update 2 (Build 17.2.9.0)
View 4 Replies
View Related
Sep 27, 2013
Is there a way to set up a custom Point Label Style that will change the text color if the information entered meets particular criteria? I will be entering sample measurements taken on two (2) different dates, but if the sample data is greater than 1.0, I want it to show up a different color.
View 4 Replies
View Related
Oct 5, 2012
I have created an assembly containing several parts. I want to export several text parameters of the assembly and parts into the i properties of the corresponding idw so that I can use them in a text block.
View 4 Replies
View Related
Jun 26, 2012
I am running into some trouble with user parameters that have been inserted into a dimension's "text box". I sometimes hide the dimension itself and insert these parameters so that iLogic can manipulate the upper & lower tolerance limits for a dimension.
The problem seems to arrise anytime one of the dimension's arrows becomes detached from the drawing (and perhaps for other reasons, too, although this is the only clear cause so far). I can reattach the arrow and the dimension seems healthy again, but if I go into the text editor, I notice that the link to any parameters that I've inserted has been lost. They appear as they were last set, but will not update if the parameters themselves change.
Is there a better workaround for this, or can we expect a solution in IV2013? I've invested close to a year's worth of work expecting this method to perform properly, and it will be a letdown if there's no solution.
View 1 Replies
View Related
Mar 14, 2012
Currently, when adding a parameter in the text dialog box, the parameter displays as a decimal (0.50). Is there a way to change this to display as fractional (1/2).
View 3 Replies
View Related
Jul 19, 2012
For starters, I am using AutoCAD 2013.
I am having trouble with changing the text height of attributes in a block. I know that I can normally use BATTMAN and ATTSYNC to change the text height, but those are not working in my case.
I am using a point parameter and STRETCH action to enable my attributes to be moved, while the main object stays in place. When the attributes are not tied to the point parameter and I use BATTMAN in the block editor, the block will insert with any changes to attribute text height. When they are tied to the parameter and I use BATTMAN in the block editor, the block will insert with the attributes at the text height that they were created at. The only way I can change the text height is to use BATTMAN in model space.
I can work with this, but it would be easier to use BATTMAN in the block editor since my attributes are aligned vertically and changing the text size ruins the spacing between them. It would be much easier to both change the text size and respace in the block editor.
View 3 Replies
View Related
Apr 23, 2012
Is there a way to convert the pixel based phtoshop files to the vector based illustrator files?
View 2 Replies
View Related
Aug 3, 2011
How can you access user-defined parameters/function defined in the Parameters Manager dialog?
View 1 Replies
View Related
Sep 21, 2011
Im wondering if its possible to link either a constraint dimension to an action parameter or vice versa. Or using a linear parameter's value in an user parameter formula.
Its a 2D cylinder, for winding purposes we just have a rectangle, with a distance from the Y axis for radial.
Parametric dimensions: B=thickness, C=Lenght, R=radius
User parameter: A=Diameter (R*2), Mass in kg ((((pi*(c*b))*(A+B))*1.25)/1000)/1000
For the BOM, i need A, B, C & mass
For drawing references for peoples on the floor, to distinquish a cylinder from a stick, we put lines at the top and bottom of the cylinder, 1mm distance inbetween them.
I figured that making a linear parameter + stretch on the thickness to replace the B parametric dimension, allowed me to make an array of that line, with increments of 1mm as i stretch the cylinder. The thing is that the mass formula cant take the value of action parameters....
Other alternative is to keep the B parametric dimension, and add a linear parameter as above for the array. But then i have 2 places to adjust, and from a test i made, if i change the R dimension, the linear one does not follow. Its very frustrating.
What i was hoping autocad would be able to do is distance1 for array to be same as B dimension, but it does not allow me to do that, unless im missing something.
View 0 Replies
View Related
Dec 29, 2011
the expression in question is part of larger lisp routine to create and rotate text based on the object selected and the viewtwist variable (we use dview twist to rotate our views when needed)
So the expression in question:
(< (/ pi 2) ang (* pi 1.5)
where ang is the total angle used to determine proper rotation of the text.
Now the problem. In most cases where ang = 90 (or 1.5708 radians) this works fine. the two exceptions i have encountered
in testing are a line at 70 degress, viewtwist 20, and line at 50, viewtwist 40. For whatever reason at these two conditions the expressoin evaulates True instead of nil and rotates the entire text object incorrectly (180 degrees). So question is how exactly is this being evaluated? i know its comparing ang (* pi 1.5) to (/ pi 2). is there some sort of rounding error? or maybe the expression needs a wee bit more definition? attached image and full lisp routine for reference of what is happening, blue text is angle of the line as created by routine at viewtwist 0.
View 1 Replies
View Related
