AutoCad :: Shortening Polyline Block
Dec 3, 2012I have several polylines in block format. I need to shorten the entire block: 40' to 20'. I'm guessing I go into block editor?
AutoCAD 2010
ADVERTISEMENT
AutoCAD .NET :: Polyline 3Ds In Block Reference
Jan 11, 2013I have a weird problem with exploding block reference with vb.net as follows.
When I use BR.explode(DBObjectCollection), and append the entities in the object collection to model space,
the 3d Polylines inside the block reference do not get appended and I do not get any kind of error. The reason for this eludes me as of yet. (remember, simple polylines and lines and other objects do get appended to model space)
When I use BR.explodetoOwnerSpace(), the block reference explodes as it normally is expected to, but then I have no way to collect the objects from the exploded BR.
AutoCAD .NET :: Block Insertion Along Closed Polyline
Aug 3, 2011I've been using the admittedly pieced together code in order to insert border blocks around a closed polyline. Yhe problem I'm having is that when the Block angle is say "zero" the block is inserted the same way both on top and below the polyline. Since the blocks surround the polyline the blocks on the downside should have an additional 180 degree rotation. How to deduct that the portion of the polyline is in a certain quadrant and adjust the insertion angle as necc? I 'm not sure thats even the best approach.
Dim pso As PromptStringOptions = New PromptStringOptions("Enter name of block to create reference: ")
Dim pr As PromptResult = myEd.GetString(pso)
Dim blkName As String = pr.StringResult
'If (!bt.Has(blkName)) Then
[Code] ....
AutoCAD .NET :: Find Nearest Polyline With Block?
Nov 7, 2012I'm using VB.NET to write a routine that autmatically calculates the area of the polyline nearest to a block (the pline surrounds the block) an then adds the area to the blocks attribute.
I managed to write the program to do this manually for a selected pline and block.
How can I automatically select a pline nearest to the selected blocks' insertion point?
AutoCad :: Polyline And Accurate Block Insertion?
Mar 5, 2012I have a polyline which consists of straight lines and curves in 2D enviroment.
I want to extract some coordinates. I usually use block refferences and "dataextraction" command. However, the problem is as follows:
I need to mark many things along the polyline's way at no constant intervals (not possible to "measure" it) If I have "osnap" on, I can't hit the spots I like for obvious reasons. If I have "osnap" off, I can't place the object accurately on polyline's way.
So, what I need is: how to allign multiple blocks to a said polyline. Allignment needs to be done as accurate as possible, prefferably perpendicularly to closest tangent of polyline.
AutoCAD 2010 :: Explode Polyline / Polygon Within Block
Jul 23, 2012I would like to explode a polygone I've created within a block.
But I get the "_amexplode This command is not allowed while the REFEDIT command is active."
Um so, I have to explode the block, explode the ployline/polygone and recreate the block.
Or, I could minus the polygone from the block set, save the block, explode the polygone, reopen the block and add the lines back in.
I don't see an explode option in the "pedit" options.
Am I missing something here, is there more than one explode command now? It worked in a previous version.
AutoCad :: Label For Polyline Width In Dynamic Block
Jan 14, 2011I have a dynamic block with several look-up values for the polylines width and I'd like to label them (as a text in the drawing over the block), and be able to move this label where best fits. I've being trying inside the block, but then it can't be moved outside of it. I tried MText with field outside the block, but it has to be applied in many one by one.
Should I use the block itself (how?) or there is a lisp for this? I have a lisp for bearing and distance for lines, which places the bearing text above them and the distance text below those lines, no matter what angle is. It will place in the middle and in the same angle as the line. I edited this lisp file, but how to change it for my purpose, as I don't understanding all the codes inside of it.
AutoCad :: Block Read Lenght Of Polyline And Dynamically Change 2nd Value?
Jul 26, 2011I want to make a block with dynamic attributes. Basically I have some polylines on my drawing which represent cables, and I want to have a block with a legend on each polyline with 2 values. First will be the cable type which I would enter manually and the second value will be the length of the polyline. Is there any way that the block would read the length of the polyline and dynamically change the 2nd value?
cableblock.jpg
AutoCad :: Paste One Block On Polyline / Line With Specified Space Interval
Oct 9, 2011I want to paste one block on polyline or line with specified space interval as per attachment. How to do?
View 3 Replies View RelatedPhotoshop :: Does Shortening The Depth Of Field Increase Or Reduce The Visual Impact Of A Rendering
Oct 27, 2012Photoshop's 3D rendering offers us the ability to create imagery that's virtually perfect. It even allows us to specify the depth of field, from infinite, to reasonably short.
My question to you is this: Does shortening the depth of field increase or reduce the visual impact of a rendering? I offer these examples for you to judge:
I can't quite decide which I like better. The one that's sharp edge-to-edge seems a bit more like eye candy, but the one with the short DOF seems maybe more realistic. On the other hand, blurring things always feels a bit like hiding imperfection, when in this case it's hiding perfection.
AutoCAD Visual LISP / AutoLISP :: Block Insertion Point Is Within A Closed Polyline
Oct 11, 2011I've have code to test if the insertion point is within a closed polygon. But prior to testing the insertion point I use ssget to trim the selection set initially..
(ssget "CW" Pnt_List (list (cons 0 "INSERT")(cons 2 BlockName)))
this requires that the whole Crossing Polygon is visible, so I do a zoom first. This requires time. Is there a way I can do this that does not require the zoom?
AutoCAD Visual LISP / AutoLISP :: Link Attributed Block With Polyline To Get Area
Sep 13, 2013I'd like to set up a blockwith different attributes like Roomname, Floor, Area,...
Therefore I'd like to link a polyline of the drawing with the block and it shows me its area. I know how it works with fields, but not how to connect it when the field is within a block.
Is there a LISP for that?
AutoCAD Visual LISP / AutoLISP :: Modify Property - Insert Polyline As Block
Sep 22, 2011I am starting with a polyline then i use the pasteblock command to insert that polyline as a block.Now i can pull up the property box and change the xyz scale.
I would like to know how to change these setting in my lisp.The scale will be x=1 y=0.1 z=1
AutoCAD Visual LISP / AutoLISP :: Routine Required To Replace / Place Block On Each Closed Polyline?
Mar 26, 2012Does any Lisp routine available to batch replace all the closed polylines with an existing block?
View 9 Replies View RelatedAutoCad 2D :: Drawing Polyline To Have Tooltip Box Show Cumulative Length Of Polyline
Nov 6, 2013Is there a way, when you are drawing a polyline, to have the tooltip box show the cumulative length of the polyline, rather than the length of the current segment being drawn?
View 6 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Reduce Polyline With Multiple Vertices To Single Polyline
Jun 7, 2012I would like to take all the vertices out of a multiple-vertices polyline so that it reduces to just its start and end points, can this be done?
View 4 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: 3D Polyline To Polyline To Spline With Max
Sep 21, 2013Due to modeling purposes, I need to convert a 3D polyline to a spline. What I have been doing is:
- change polyline fit/smooth to cubic from properties
- convert polyline to spline by typing spline -> object
- method -> fit from properties
You can see the original 3D polyline (green) and the resulting spline (magenta) in the attached drawing.When I zoom in and measure the distance between the two entities at different points along them, at some points the perpendicular distance exceeds 5 millimeters, and I want to ensure the deviation remains under 1 millimeter or even less.
I know I can change the knot parameterization of the spline, and this does work at some locations, but the difference increases at others.Why is there a 5.6 mm difference between the spline fit point and 3D polyline vertex, as measure in the attached drawing?
Now, I can go and manually stretch the fit point to coincide with the vertex. Also, I can add fit points between existing ones to drag the spline closer to the original 3D poly.
However, some of my polys are really long, and it is very time-consuming to do this manually while measuring points along the entities to make sure the distance stays small enough.
how to automate this process? For example a lisp that would maybe take the original vertex points, add say maybe 3 (not too many) new ones between them, and then generate a spline while making sure the deviation is less than the set value of 1mm? I am using AutoCAD 2013.
AutoCAD .NET :: Getting Polyline Data Into A Custom Derived Object (from Polyline)
Nov 11, 2013I've been working on a custom polyline object, and I've got it functioning!!Having said that, I plan to run its creation around picking a point for bounary selection.
(Other than trying to step through every vertecies) is there a technique I can thow the polyline data from a traceboundary result into my custom object? I've been trying to add the polyline from traceboundary to my object BEFORE it's added to the transaction by the way...I assume that's right, since I want to put it's data in my custom object then add my custom object to the transaction instead.
AutoCAD Civil 3D :: Convert Metric 3D Polyline To 2D Polyline
Jun 29, 2013I want to convert a 3D polyline to 2D polyline.
View 5 Replies View RelatedAutoCad :: Automatic Join Polyline Onto Existing Polyline?
Sep 16, 2011Is there any way at all to draw a new polyline - from the endpoint of another polyline, and have it automatically join as one polyline from the existing section??
I know this can be done via PEDIT, but its so laborious and soo many clicks, and I have alot of segmented Polylines that I need to consolidate when I draft.
AutoCAD Civil 3D :: Align Polyline Onto Another Polyline
Mar 22, 2012Any way I can align a new polyline to a reference polyline (orig polyline).
The 2 polys will be generally the same length, however, the number of vertices will differ.
Also I need to mantain the same distance between the vertices on the new poly and the new and reference poly won't follow the same direction.
AutoCAD .NET :: How To Find If Polyline Is Inside Another Polyline
May 18, 2011How do you find 'if' a polyline is inside another polyline?
View 2 Replies View RelatedAutoCAD 2010 :: Polyline To 2D Polyline?
Mar 2, 2012How do you convert a closed Polyline to 2D Polyline? CONVERT does not work in reverse.
View 4 Replies View RelatedAutoCad 2D :: How To Convert 2D Polyline To Polyline
Jun 25, 2008I have 2D polylines and want to convert to polylines, but to no avail. Tried to 'spline2pline' this line, but ACAD refuse to select it.
View 9 Replies View RelatedAutoCAD Map 3D :: Select Polyline By Intersecting Polyline (select By Location)
Aug 10, 2012I can do this in AutoCAD Map but I have my doubts. I will explain in ESRI GIS terms (this is what I am familiar with) and I hope you can tell me if I can do this in AutoCAD Map. In ESRI ArcMap I can select a line and I can hit a Select by Location button. In this window I can select all of the objects that intersect my selected line. Then I can delete them or export them etc.
In AutoCAD Map I have a polyline selected. It is my road centerline. I want to be able to select all of the other polylines that intersect my selected polyline. Is there a way to do this? I need to erase those polylines. Usually I will pan to each of them and select them individually. It just seems to take a lot of time. My AutoCAD co-worker said I could use a fence and draw the fence through my polylines. It seemed to work ok but I accidently deleted extra things that I needed. So I'm back to manually selecting each one by one unless you know a different way.
AutoCAD Civil 3D :: How To Convert 3D Polyline Contour To Polyline Contour
Mar 24, 2013How to convert a 3D Polyline contour to Polyline contour.
View 4 Replies View RelatedAutoCAD 2013 :: Updating Block References Resets Block Table Selections?
Sep 4, 2012We use a number of blocks with block tables for data extraction here, and whenever one of the blocks is modified and updated, all of the block tables reset to the default value. This happens for any block reference change, not just changes to the block table (which makes sense that it would reset).
How can we update these blocks without having to manually change all of the block tables afterwards?
AutoCAD 2013 :: Dynamic Block In Action Doesn't Reflect Test Block
Jan 24, 2013I am in the process of fixing one of our dynamic blocks. It's a fairly simple fix where there was a typo in one of the names of our items in the lookup that needed to be fixed.
I changed the name of the item in the lookup table. I went and did the test block and it seemed to work fine, but when I bring the block into a drawing, it reverts back to the old lookup as if I did nothing at all.
I made sure that the path was correct and I even just dragged and dropped straight from Windows Explorer to no avail.Does AutoCAD keep referring to the old block? Did I forget to change something else?
AutoCAD Architecture :: Explode Destroys The Small Block Inside Bigger Block?
May 30, 2012I have a block containing several parts blocks. When I explode the main block all of the parts are exploded back to lines. I have used both "explode" and "xplode" and have the same results. How can I explode so I have my components as blocks?
View 6 Replies View RelatedAutoCAD Civil 3D :: Inserting A Block Deletes Points With Point Style With Same Block
Oct 16, 2013We're using C3D 2013 SP2. The survey company we use uses point styles to show the blocks. Say they shoot a catchbasin. Instead of inserting the block, the point shows up as the block.
I did a field check & needed to insert a missed CB. When I inserted the block, the other points that were CBs disappeared. I had to insert the block, copy it the clipboard, undo the insertion & then paste the block in. It did this on other drawings & other blocks.
AutoCAD 2010 :: Inserting New Block And Entering Attribute Data By Selecting Another Block?
Aug 13, 2012Is it possible, via whatever methods (lisp?) to be able to have a premade block with an attribute and insert it into a drawing then assign a value to it by selecting another existing block in the drawing and using one of its own attribute’s values?
For example, say I have a block representing a telephone and it had an attribute called "PhoneNo" and I inserted it into a drawing showing an office floor plan that had blocks in each office space that are telephone junction boxes with attributes "PhoneExtension". I would like to be able to autocomplete the entering of the “PhoneNo” data by selecting one of the telephone junction boxes in the drawing and using its attribute’s value.