AutoCad :: Rules Between Parameters In Dynamic Blocks?
Dec 4, 2013
Can we set some rules between parameters in Dynamic blocks?
see the attached file. I want to move the point "A" according to a ratio of the applied stretch. To make it simple, try to keep the the point "A" always in the middle after applying stretch on the dynamic block.
View 5 Replies
ADVERTISEMENT
May 5, 2010
I've made annotative blocks and I've made dynamic blocks... My intent is to integrate both but I can't find a way to move dynamic block parameters separately at different annotative scales.
In other words, if I insert an annotative dimension and add multiple scales I can move the dimension grips independently at each scale. If I insert a dynamic block I want to be able to use the dynamic block's action "grips" to do the same. However, with a dynamic block, if I move a stretch action at one annotation scale it moves the action at all annotation scales.
The attached file shows a simple example.
View 2 Replies
View Related
Dec 4, 2013
I am looking for a way to use the ATTIN/ATTOUT workflow to bring in data from an excel spreadsheet to drive the size of each of my block's instances. The block will be simple, a rectangle, with width and length parameters. For each entity in my excel/csv file these parameter values are spelled out. I know how to display these parameters in my attributes, but I don't know how, if I were to feed in these values, to drive the geometry. If there's a better way to take a list of width and length values to generate a series of blocks each with a rectangle containing its respective size.
View 1 Replies
View Related
Dec 13, 2013
I'm working on a dynamic door, that has specific parameters to change its size and orientation. Everything works pretty good, only the arc for the door won't react the way I want it.
View 8 Replies
View Related
Aug 2, 2012
We used a bespoke program to convert our drawings to Java applets for web usage. This does not cope with dynamic blocks at present and we have started to receive drawings from our clients using them.
I need to replace this with standard static blocks based on one of two criteria. Either:
1) Replace based on visibility state (have generic chair block with multiple different chair types set by visibility type, need to replace depending on which type it is set as)
2) Replace based on parameter (have table with size set by dimensions, need to replace with static block for each dimension)
View 0 Replies
View Related
Nov 20, 2013
I wish to have a single dimension alter the dimensions in a set of nested blocks, similar to shared parameters in Revit. For example, I have a circle that has a fixed diameter that I wish to control in all blocks. I have set the diameter to barDia so now I wish to manipulate the dimension from outside the block.
Am I able to share the parameter across all the blocks?
View 1 Replies
View Related
Nov 12, 2008
Creating a dynamic block that contained more than one visibility parameter. I have tried and it wouldn't let me do more than one. I was thinking of using multiple visibility to work through some text or attribute option all contained in one block instead of having 5 seperate blocks. Wanted to combine all 5 into one, just cannot get the multiple visibility to work.
View 9 Replies
View Related
Sep 1, 2011
I have two stretch parameters on a dynamic block. How can I link them together? For example if the user stretch one them the other automatically stretches accordingly. I assume 'Parameter Manager' is the key.
View 7 Replies
View Related
Sep 1, 2011
I have a block containing a visibility parameter but the problem is when it is inserted, that visibility parameter is in a different place to where I put it in the block editor.
My geometry is around the 0,0 origin (which is also the base) and the visibility parameter was placed at 0,-25 in the block editor however once it is inserted in a drawing it shows up at 270,130.
No matter where I move it back to, it always reverts back to another position. Every time I try to change and reinsert, I purge the drawing so I know it is not picking up on something else.
View 1 Replies
View Related
Apr 2, 2007
I have created a block with 3 different elements (A B C). This 3 elements are totally independents and they can be visible or invisible. Whit only one visibility parameters, there are 7 different visibility states:
xxC, xBx, xBC, Axx, AxC, ABx, ABC
If there are 4 or more elements there are too much possibilities.
I've tried to create 3 visibility parameters, but it's not possible.
¿How can i create independent visibility states for each different object in a block?
View 9 Replies
View Related
Apr 23, 2013
I am trying to create a dynamic block that allows me to insert a single rack into a drawing and make a single row of racking with all racks staying 9'-0" center of post to center of post. Also would like to be able to turn that one single row into a double row that spacing between rows can be modified. I have attached a cad file showing a single rack and two example, one of a row of double racks and one of a single row of racks. This rack is 48" deep i will also have to create this for a 60' deep rack so how i can create future rack sizes and rows.
View 1 Replies
View Related
Aug 22, 2007
Is it possible for a dynamic block to have one attribute which is set to different visibility parameters; eg. i have a block made for a Setting Out Point. I wish to have 4 different locations that the user can place the attribute after insertion of the block ie top, bottom, left, right, of the SOP.
View 2 Replies
View Related
Oct 18, 2012
See the dwg attached.
I'd like to modify a dynamic door block I've created so that I can stretch by door leaf size OR structural opening size, but I'm not sure how to do this.
Incidentally, I think the block has some flaws:
- I think the 'center/flip point' is not exactly in the center!
- The frame size should be 40mm, not 32mm
- The packing zone should be 30mm, not 6.38mm!
View 8 Replies
View Related
Jul 11, 2013
I have a dblock I built that has quit of few User Parameters. I know I can put the order I want them to display but is there a way to break them up by a blank line, or maybe subtitle a group of user parameters?
View 3 Replies
View Related
Feb 20, 2012
I'm using the attached lisp to change the parameters of a dynamic block. In particular, I use the function chgdynprop
(defun c: test () (setq oggfreccia (car (entsel))) (chgdynprop (Vlax-ename-> vla-object oggfreccia) "Distanze1"300.0))
The lisp function works properly, because if I select the block from the bar I can see that property Distanze1 = 300.0
View 1 Replies
View Related
Jul 29, 2013
When I create blocks and give them dynamic elements, I often define user parameters in the block table. I have noticed that on some drawings when I open them and go to the block editor to edit them, the user parameters have no name, value, or expression and my dynamic will not work.
I have tried renaming them and putting the expression back in from the parameters manager, but it gives me an error message saying invalid parameter name.
View 2 Replies
View Related
Nov 20, 2013
I am drawing a block that containes a number of other blocks which I want to control parametrically. For example. In one block, I have set the diameters of a circle restricted to 10 and 12-mm. I have a second block that also contains the circles which have similar restrictions. I now want to control the diameters of the circles from a single source - similar to shared parameters in Revit. Am I able to share a global parameter between blocks?
Eventually, I want to control a 2D drawing from a table only. Should I be using .Net or AutoLisp for this.
View 4 Replies
View Related
Jan 29, 2010
Is it just me or do the actions associated with parameters disappear on occasion from the block editor? Sometimes a regen will make them reappear, other times not. Closing/opening the block editor is one way to make them visible again (worked a few times at least).
View 6 Replies
View Related
Feb 6, 2013
I'm trying to create a window block with a grille. I've created the block and the horizontal grilles. What I'm having a hard time with is creating the vertical grilles. I would like to set up an array that would take the glass width, divide by 12, round up the value to get the number of vertical sections. Here's the code that I've figured out:
(W/(ceil(GW/12)))
W=Width
GW=Glass width
How do I set up an array with this formula?
View 2 Replies
View Related
Oct 18, 2011
I have a block which I want 2 visibility states. VS1 and VS2 share some objects and not others. I have a linear parameter in each which I want to do a stretch action on. The stretch action in each visibility state acts upon entities both shared and unshared between VS1 and VS2. This doesn't seem to work..
View 2 Replies
View Related
Oct 6, 2012
But I was wondering if it is possible to contol the insertion of dynamic blocks and it user definerable parameters from a excel-text file.
I am surveying a section of pipework and I need to display the brackets that are supporting the pipes. As there are numerous pipes on top of each other I have decided to show the brackets in plan and isometric view.
I think I have made the dynamic block ok and have numerous stretch/move and scale parameters working correctly.
But the only way that I can see of chaging these parameters at the momment is by manually typing them in the properties tool pallete for each individual block.
So I was thinking that if I can store the correct values that I need for each parameter in the dynamic block on our data logger along with the correct E,N,Z insertion point is it possible for this file to change the parameters in the dynamic block for example, If I have the correct insertion point stored and then have 10 parameters stored with that point for simplicity I store as A=5.00,B=8.00,C=0.100 etc and these correspond with the parameters in the dynamic block will this file be able to alter the dynamic block as the values in the excel/Text file are displayed.
View 2 Replies
View Related
Sep 26, 2013
What's the difference between the "Point" Parameter and the "Base Point" Parameter in the Block Authoring Parameter Pallet?
HP DV7 Laptop
Intel Core i7-3820QM 3rd Generation Quad Core 2.7 GHZ CPU
16 GB DDR3 RAM ( 2 DIMM ) / 180 GB SSD
Nvidia GeForce 650M Graphics w/2 GB Memory
Windows 7 Professional 64 bit / AutoCAD Civil 3D 2014
View 6 Replies
View Related
Feb 25, 2013
I have a large collection of parts that are controlled from an exteranl rule. I need to make slight changes to the external rule, but for the changes to be successful I need two extra user parameters to be added to each of the parts. There are hundreds of parts, so going in and adding the two parameters to each would take days.
Is there a simple way of getting the external rule to add the two parameters?
P.s. My VB skills are pretty limited, but my understanding of iLogic is pretty good.
View 2 Replies
View Related
Mar 15, 2012
I have created a dynamic block with several visiblility states. The block works great for what I need it for. however, I am trying to add one more action to the block but am having issues.
This block is essentially a 24" retail cabinet with the visibility states showing the different drawer and shelf configurations. I want to be able to lengthen the cabinet in 24" increments and have the visibility show for each 24" section.....e.g. I want a 10' cabinet so I bring in the 24" starter block. Then stretch the cabinet to the 10' mark, then I can chose any drawer/shelve config for each 24" section (they are all different).
I can get the block to stretch in 24" sections....no problem.....i just want the visibility state to be duplicated as well for each section. Now as it stretches, there is only one Vis state and it only populates the first cabinet.
I could do this by copying the block over and over 5 times.....but I am hoping there is a way to make this dynamic.
View 7 Replies
View Related
Apr 23, 2013
I have a block I am making into a Dynamic Block. I will be adding in different visibility states. Depending on the visibility state the block would need to be inserted from a different point.
My question is, is it possible to add multiple insertion points to a dynamic block so depending on the visibility state it defaults to the correct insertion point?
View 2 Replies
View Related
Sep 7, 2012
is there a way to make dynamic blocks stretchable similar to a mleader,
the blocks i create are only stretchable by grips, and not by crossing
(i am using linear or point parameter stretches)
View 2 Replies
View Related
Jun 1, 2006
Is there anyway to link standard AutoCAD Grips and there commands to Dynamic Block Actions? I want to stretch an arc by its midpoint grip. This accomplishes something that no other commands do.
View 4 Replies
View Related
Mar 22, 2013
So I've done a reasonable amount of work with dynamic blocks. I have a block with a rotation action and grip to arbitrarily align it. However I realized when trying to combine it with an alignment grip (which actions on the basic or fundamental block rotation angle) that there didn't seem to be a way to some how link a dynamic block rotation action or one of the custom angle properties to a the fundamental block rotation angle. Thus there are two additive rotations at work; the dynamic block one with its grip and the fundamental rotation property.
This can cause some confusion when one person aligns with the grip and another via rotating the block's fundamental property and would also be problematic in the generalized sense if one was trying to select or programmatically read back the net angle alignment.
View 2 Replies
View Related
Jun 13, 2013
I have a dynamic block, that represents a stirrup.
I inserted in the block a Block Propreties Table, that have some preset dimensions for the stirrups. The grip of this table I decided to put in the top right corner.
The problem is that I can't make this grip moveable )
See the attachement with the block
View 1 Replies
View Related
Jul 25, 2012
new to dynamic blocks but looking to streamline my wiring diagrams here and have created a block that shows the typical wire styles we use in a simple easy way. I now want to add an overall flip to the entire block and have not been able to find set this. I would prefer to use the same label and go from there. I have included the block to show what I mean. It is only working on the single visible item at the one time. I know this has to be possible just let me know what I am doing wrong. I am running AutoCad LT 2013
View 3 Replies
View Related
Feb 28, 2012
I need to create a dynamic block for a "Glass Panel" in a balustrade. I need to be able to insert it, in one corner and stretch it in another corner, to suit the staircase angle.
I've created the block, but it isn't working correctly. I've attached a drawing, with the left hand drawing a sketch of how it needs to be. The right hand drawing is my dynamic block attempt. As can be seen, when the block is stretched between the 2 points, it doesn't follow the angle of the staircase correctly (Very slight run off)
View 9 Replies
View Related