AutoCad :: Plotting Lineweights For MAC

Jun 24, 2013

I have been trying to output a drawing from Autocad MAC 2011 to a PDF with lineweights however it only outputs the drawing with the different layer colors and I have assigned each layer a specific lineweight, I have tried making a plot style and I have tried printing in greyscale and I still cant figure it out. Any simple step by step process to plotting in lineweights!

View 0 Replies


ADVERTISEMENT

AutoCAD Architecture :: Lineweights Not Plotting

May 6, 2013

I am a student studying architecture and I cannot seem to plot the line weights  in my drawing. I'm using a dwg to pdf ploter. The plot styles I have tired, have included monochrom ctb and monochrome 1 to 50 ctb.

View 7 Replies View Related

AutoCad :: Plotting - Lineweights Too Dark (both PDF And Printer)

Sep 28, 2011

I'm having problems with lineweights. It shows up too dark whenever I plot to both pdf and the printer (Kyocera KM-2560 KX). Ive tried adjusting the ctb file (changing thicknesses of colours) but to no avail. This problem does not occur for my colleagues, with exactly the same ctb file. So is it a general autocad setting problem?

View 2 Replies View Related

AutoCad :: Lineweights Won't Plot?

Oct 21, 2011

I've been using Autocad as a student since the 2007 version and haven't had this problem (in any case, I've been able to solve it before).

Now, I have run into the problem of the lineweights not plotting - they are all the same thickness.

I'm using ctb plot styles and I have the lineweights set up in layer properties...

And have lineweights enabled in plot...

And in the plotstyles editor...

And the colour tables as well...

In the end... all the lineweights are the same.

View 8 Replies View Related

AutoCAD LT :: Drawing That Won't Plot Lineweights?

Mar 2, 2008

I have LT08 and have one drawing using linestyles and colors to determine lineweight for plotting that just will not plot anything other than a "light" lineweight. I have tried making an all new .cbt, existing .cbt's, changing ALL colors to a heavier weight etc. Nothing is working.

Plot preview is light lineweight, plotting to pdf is light and plotting to the plotter is light. I am not having this problem with any other drawings so there must be something set somewhere in this one file. I did not create the model. Someone else did but I did setup the layout sheet, just like I do other drawings.

View 3 Replies View Related

AutoCAD LT :: Printing And Retaining Lineweights?

Oct 21, 2013

I would like to print a drawing with its ctb. file to a format that allows me to import it into illustrator without losing the set lineweights in the original Autocad drawing.

I've tried it once using a pdf writer, but when imported into illustrator it reverts to one line weight for all the lines.

Is there a better way of retaining the assigned lineweights (per the embedded ctb file) ?

 will printing it as an .eps instead of pdf do? and how does one print to .eps?

View 1 Replies View Related

AutoCAD LT :: Plot Drawings - Lineweights Be The Same

Apr 30, 2013

I'm trying to plot my drawings and have all my line weights be the same in the final plot so that no line is more bold than another. I do custom home designs and am now adding in additional information that uses different colors for appliances, plumbing, etc.

I'm using the standard red, cyan, magenta, green, 252 gray scale colors, however, when I plot, all of the lines except red are thick and make the objects entirely too bold for my purposes. How do I fix this other than changing everything to red? I didn't have this problem when I worked with AutoCAD 2006 at my old company (we had drafters set up this stuff for us), but now that I'm on my own and trying to get my own plotting figured out, I'm struggling.

I attached an example for reference. It's the windows (gray scaled), plumbing fixtures (cyan), and appliances (magenta) that come out entirely too dark.

View 3 Replies View Related

AutoCad :: Block Editing And Lineweights

Feb 16, 2013

I edited a block in a drawing which had exactly the lineweight I wanted in my layout. After I edited it I lost the lineweight. If I try to change the lineweight for that layer it only affects the attribute. What I did and how I can get it back the way it was?

View 3 Replies View Related

AutoCAD 2013 :: Exporting To PDF - View Lineweights

Nov 22, 2012

When you set the lineweight the result is only viewable when you print the drawing, however how is it possible to view the lineweights when I export the drawing to pdf as well.

View 1 Replies View Related

AutoCAD 2013 :: Add To Available Lineweights In Existing Drawing?

Feb 6, 2013

I'm wondering if there's a way to change/add to the list of available lineweights in the dropdown lists in the layer manager. I want to have a thickness of 0.125", but that isn't available. I found that if I issue the STYLESMANAGER command, I can edit lineweights in existing .ctb/.stb files, but I don't know now to transfer that to be available in an existing drawing. Can I just assign a ctb/stb style to my drawing?

View 4 Replies View Related

AutoCAD 2010 :: Plot Scale Lineweights

Sep 6, 2012

Am configuring many page setups and when printing/plotting there is a checkbox to scale lineweights. Was wondering what the consensus is on this. Should the check scale line weights box be checked, or not?

View 5 Replies View Related

AutoCad :: Changing Xref Layer Lineweights

Aug 22, 2013

Version: Civil 3D 2012 and use CTBs for our plotstyles.

I'm working on a fairly large project that requires an excessive amount of base drawings. We frequently will be asked to have a drawing made and issued in a morning. To make sure we can constantly throw these drawings together quickly we've setup an xref system of all our base mapping data. (I'm sure this is a common thing but its the first time I've been exposed to it).

A lot of these drawings will have polylines with global widths on them. The problem with this is that global width doesn't always work so well when changing scales (we frequently bounce from 1:100 to 1:20,000) or when you just don't need the line to be so thick.

Two questions:

1) Stop using global widths on lines in the base drawings and switch to a method of setting lineweights of the xref layers when you xref in a drawing.

2) find that it ends up rounding off the end of the lines. Is there a way to prevent this from happening?

View 1 Replies View Related

AutoCad :: Converting CAD Files To PDF With Proper Lineweights

May 31, 2012

I'm having problems plotting to PDF's and maintaining the line weights etc.. that I get when I print to my plotter. It seems like Adobe Acrobat Pro 9 converts based on the color of my pens.... the lighter color value i.e. yellow, the lighter the grey tone. white is darkest. It ignores my lineweight settings, so I have no control on the quality of the output. Is it possible to get it to use the .ctb files that my plotter uses when creating it's PDF? I'm using AutoCAD LT 2010.

View 3 Replies View Related

AutoCad 2D :: Printing Drawings After Setting Lineweights

Aug 23, 2013

I'm trying to get my HP Officejet Pro 8600 printer to print my drawing when I have set the lineweights. Apparently, it won't show the heavier lines, consequently, all of the lines are the same width.

View 7 Replies View Related

AutoCad :: Plotting To PDF Versus Plotting To Printer?

Feb 26, 2013

I'm attempting to plot a drawing with a 3d shape and a title block around it. I would like for the occluded lines to not be drawn therefore I'm using the hidden visual style and set shade plot to hidden as well.

My problem arises from the quality of the plot to PDF versus the quality coming out of a printer. It is just a 8.5x11 page. The pdf comes out with horrible anti-aliasing and jagged lines, whereas the print is entirely smooth. Is there something simple I'm missing? It would be even better to find a way to make the plot to PDF come out in vector format! I know it is possible to show the layers and have them vectorized in a PDF... How is this done?

View 4 Replies View Related

AutoCAD Print / Plot :: Scale Lineweights Is Grayed Out

Oct 16, 2001

Why in some of my drawings I am not able to select the "scale lineweights" check box in the plotting dialog? I am using 2002. I can't seem to find any differences in these dwgs?

View 2 Replies View Related

AutoCAD 2010 :: Drawing Lineweights Not Displaying Properly

Oct 31, 2013

I'm having an issue with some of my drawings where the all the lineweights appear much too thick on the screen. When I plot the drawing or look at a print preview the lineweights appear correct, but in model space they appear much too thick.

I found the option to show / hide lineweights, and when I toggle this option from show to hide it seemingly fixes the issue, but when I pan or zoom on the drawing the think lineweights come back.

Why this is happening, even with show lineweights enabled they should not be displaying this thick as every line on the drawing is default lineweight, and the default is set at 0.25mm, I have the exact settings on different drawings but they dont have this display issue.

View 3 Replies View Related

AutoCAD Architecture :: Globally Edit Lineweights Of Certain Components?

Nov 7, 2011

Is there any easy way to globally edit lineweights of certain components?  Several of the components look fantastic at one scale and terrible at another.  Some we just need to lighten but I cannot find where to edit them.  I can always (of course) edit the block once it is inserted or edit layers in each drawing but would prefer a more permanent solution.

View 1 Replies View Related

Revit :: Set Lineweights For Generic Models Imported From Autocad?

Jun 8, 2012

I have an MEP dwg with 3d geometry that I would like to take a lineweighted section through.
 
I successfully made the section by importing the cad file into a generic mass, but I cant seem to get the lineweights to show up.
 
I've tried setting overrides and object styles for generic models, but it doesnt register the cut line, only the projection line style.
 
I also tried importing as an IFC, which also converts the file to generic models, but no dice.

View 5 Replies View Related

AutoCAD 2010 :: How To Set Up Drawing For Correct Monochromatic Lineweights

Aug 8, 2012

I'm using ACADLT 2012;

I can't see the means by which I can plot proper lineweights to my laserjet. And when I try to plot to pdf file I get the line colors instead of a weighted line.

How do I set up my drawing for correct monchromatic lineweights ?

View 2 Replies View Related

AutoCAD Architecture :: Lineweights Visibly Thick When Zoomed In

Mar 2, 2012

why my lines are thick when I zoom in on screen yet they become "normal when zoomed out" seams to me that lineweighs are being displayed on screen, a variable setting perhaps?

View 3 Replies View Related

AutoCad :: Changes Made To Lineweights Don't Stick When Working With Xrefs

Nov 1, 2011

I'm working with xrefs. As of yesterday, the "Display Lineweight" option was checked on all the files.

My process is, open the xref; find out the layer it (the object in question) is on, adjust that layer by using the LA command. I click on "open xref" and make my adjustments to the lineweights at that point. Then I click save changes, and a dialog box appears saying, this will save all the edit changes. At that point, (after indicating I want to save the changes,) the file reverts back to it's pre-edited state, before the lineweights were adjusted.

If the "Display Lineweights" option is checked, in a normal file, everything works as it should.

View 9 Replies View Related

AutoCad :: Lineweights Are Shown In Model Space But Not In Layout

Jun 12, 2011

I have another question: My lineweights are shown in model space but not in layout. When I print/plot the line weights are missing.

How do I show the line weights in layout so it prints right?

I am using AutoCAD 2011 for Mac.

View 1 Replies View Related

AutoCAD Inventor :: Printing To Adobe PDF With Remove Object Lineweights

Oct 15, 2012

I am running Inventor 2013 Professional 64 bit.  When I print to an Adobe PDF I have selected "Remove object line weights".  The problem I am experiencing is that the result is the same whether it is checked or not.  The result I would expect is that the object line weights won't display on the pdf.

View 8 Replies View Related

AutoCAD Civil 3D :: Names Plot Styles Versus Lineweights

Jan 3, 2013

I am trying to standardize the company I just started with and I believe the Named Plot Styles are definitely the way to go, rather than Color Dependent.  

Now, the question I have is when I created my Named Plot Styles, I created multiple styles with different lineweights.  I plan on creating a base template with layers and have the lineweight based on the plot style.  Is the correct way to handle it?  Because we work for a certain large state DOT and they do things slightly different.  They have only 2 named plot styles (existing, proposed) and change the lineweight directly in layer rather than the lineweight being dependent on the plot style.  Now truthfully, there is no difference that I can see in the plot styles they created except for the description.  

View 1 Replies View Related

AutoCAD Inventor :: How To Export Drawing To DWG Without Losing Fonts / Lineweights

Sep 19, 2012

in Inventor I use my own library with different layers, font types, colors, lineweights etc. In Inventor drawing it works well. But after exporting to DWG only colors of different layers stay the same; all fonts, lineweights change to one (maybe some kind of default) font, lineweight.

How could I repair that, I need drawing in DWG to look like the same as in Inventor. I have tried to use "Configuration" in DWG file exporting option and I have created my own configuration, but it did not work... I simply do not understand how it works. If the "Configuration" in DWG file exporting option is the clue -

View 4 Replies View Related

AutoCad 2D :: Updating Linetypes / Lineweights Without Reattaching Base File

Jan 12, 2012

I forgot the command to update lineweights in my sheet files after making changes in my base files e.g.( change layer color in base file, and sheet file does not update unless I detach and then re-attach).

And I recall a setting to automatically allow base file updates??

View 1 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Change Lineweights Of All Layers By A Factor

Jan 22, 2013

I was wondering if it is possible to change the line weights of all layers in a drawing by factor? What I am trying to do is multiply all lineweights by 0.5 so that all lineweights are cut in half. I could just manually do this, but I have around 1000 layers in the drawing, so I'd rather not lol. However, I forsee a problem becuase layer lineweights cannot be assigned just any value, but instead they come from a predefined list. Which means that when a number is divided in half, that new number might now not be in the list.

So another option would be some way to remap all lineweights. This would work pretty well for me since I only have about 4-6 different lineweights throughout the drawing. So I could just say: All layers with lineweight = 0.024" go to 0.014", and all with 0.014" go to 0.006", and so on.

I am aware of how STBs, CTBs, and the "scale lineweights" option all work. But I am not looking to use those. I want the lineweights coming from the layers themselves.

I have used LISPs before, but unfortunatly I have never written one, so I am not familiar with the syntax.

View 9 Replies View Related

Revit :: Sweep / Profile Lineweights

Jul 29, 2011

I making a glass panel with a metal trim for a bank window teller family.  How do I control the lineweights for the metal profile?

It seems by default wide lines are being used.  I don't see an option in the family editor to pick thin lines. 

View 1 Replies View Related

Illustrator :: How To Create Testprint 5 Files With Different Lineweights

Oct 25, 2012

I need to create for a testprint 5 files with different lineweights, each file should consist an increased lineweight on all layers by a certain thickness. Is there any easier way to do it than just manually for each layer? Or do I need to write a special script for that?

View 5 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Script That Assigns Lineweights To Layer Based On Color Of That Layer

Nov 19, 2013

Any script that when ran will set lineweights of a layer based on what color the layer is assigned.  For instance if I have 3 lines that are green on 3 different layers. I need the script to change all 3 layers lineweight   to .015mm. I have drawings that are inconsistant with layer names so layer translator and methods of that nature will not work because I do not know all the layer names and I have 100 drawings to do this to.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved