AutoCad :: Changing Xref Layer Lineweights
Aug 22, 2013
Version: Civil 3D 2012 and use CTBs for our plotstyles.
I'm working on a fairly large project that requires an excessive amount of base drawings. We frequently will be asked to have a drawing made and issued in a morning. To make sure we can constantly throw these drawings together quickly we've setup an xref system of all our base mapping data. (I'm sure this is a common thing but its the first time I've been exposed to it).
A lot of these drawings will have polylines with global widths on them. The problem with this is that global width doesn't always work so well when changing scales (we frequently bounce from 1:100 to 1:20,000) or when you just don't need the line to be so thick.
Two questions:
1) Stop using global widths on lines in the base drawings and switch to a method of setting lineweights of the xref layers when you xref in a drawing.
2) find that it ends up rounding off the end of the lines. Is there a way to prevent this from happening?
View 1 Replies
ADVERTISEMENT
Jan 2, 2013
I am trying to rename all the xref's on the drawing with suffix "_renamed" With the code shown below , I am able to do this. But the problem I am facing is once the code renamed and reloaded the xref, the Xref-dependent layer properties are changing to Xref source layer properties.
Also the VISRETAIN variable is 1. Please find the code below.
Imports Autodesk.AutoCAD.DatabaseServices
Imports Autodesk.AutoCAD.Runtime
Imports Autodesk.AutoCAD.Geometry
Imports Autodesk.AutoCAD.ApplicationServices
Imports Autodesk.AutoCAD.EditorInput
[code]......
View 4 Replies
View Related
Jan 28, 2013
Everytime I attempt to change the color on this one particular layer (that is brough in though an xref), it changes the color of every layer in my drawing. I am using Autocad MEP 2012
View 1 Replies
View Related
Oct 5, 2012
How to edit the string below so that it will ignore all layer names starting with "E-". I want to change all XREF layers in the current dwg. to 161 but ignore all XREFED layer names that start with E- such as E-lighting, E-power etc.
View 4 Replies
View Related
Nov 19, 2013
Any script that when ran will set lineweights of a layer based on what color the layer is assigned. For instance if I have 3 lines that are green on 3 different layers. I need the script to change all 3 layers lineweight to .015mm. I have drawings that are inconsistant with layer names so layer translator and methods of that nature will not work because I do not know all the layer names and I have 100 drawings to do this to.
View 3 Replies
View Related
Jul 31, 2009
Is it possible to run a lisp which can extract all the xref names, make a layer with that name and then change the xref on the layer? I have got a similar routine from earlier posts but it doesn't work if any xrefs inserted in paper space (works fine on model space). could change this routine allowing to change the layer of xref in paper space too.
(defun dxf (i a) (cdr (assoc i a)))
(defun c:lxr ( )
(setq ss (ssget "x" '((0 . "INSERT"))))
[Code].....
View 8 Replies
View Related
Aug 21, 2013
I've been using Photoshop CS2 for several years to enhance my photographs, but just now have encountered something simple I cannot find out how to do. I have on the background layer a picture of a room interior with the exposure set mostly for the open window, but the rest of the room is very dark. On the only other layer, the upper one, I have the same shot exposed correctly for the room, which overexposes the window area. The upper and lower layers are perfectly superimposed, and the upper layer is at 100% opacity.
I have selected the window on the upper layer and want to change the selected area's opacity to blend properly with the window on the bottom layer without changing opacity of the rest of the layer. No matter what I do, changing opacity seems to affect only the entire layer, and I haven't figured out how to isolate the selected area for the opacity change.
I can cut the selection to reveal the darker window on the bottom layer, but this doesn't give me the flexibility I need to balance the two exposures. An opacity change would be ideal.
View 2 Replies
View Related
Feb 21, 2013
Possible to link an xref layer and local layer so they display the same (eg. sync viewport colour, linewieght, line type)?
I insert xref's for my base drawing but legend is on local layers and I would like to be able to ensure that the line colour and linetype always match...
View 4 Replies
View Related
May 3, 2013
Is there a macro or lisp file that allows you to click on a element in the xref or active file and turn it off?
View 5 Replies
View Related
Mar 11, 2013
The normal color scheme for xref'd entites is the color gray. Is there a way to change them so that the linework can be more distinguishable? With everything being gray, it is hard to differentiate between contour lines and feature lines.
View 5 Replies
View Related
Oct 1, 2012
How to edit this string so that it would change ONLY XREF layers in a dwg. to color 3 bylayer, and leave all of my additional layers in the current dwg. as is.
^C^Cchprop;(ssget"x");;color;bylayer;;-layer;color;3
View 2 Replies
View Related
Aug 8, 2013
In the attached screencast video you will see that I have a drawing set up on the left of the screen to show where all the sections are taken through the building. I have setup a layer called SPC SECTION LINES which is set up to be bylayer and on the colour green.
When I XREF this drawing into the sheet file on the right side of the screencast you will see how the colour turns yellow when reference into the new sheet file?
Why does the colour of the line change when it gets xrefed into a new drawing?
the screen cast can be found at [URL]
View 9 Replies
View Related
Dec 3, 2013
My alignment ticks use the stanard Aecc Tick block. It is on layer 0/bylayer/bylayer etc and the style is set by layer. They display correctly in the source drawing but when I xref that drawing into others, the ticks change colour based on what every the current layer is in the host drawing. If the current layer is 0 they dispaly correctly, if my current layer has a colour 5 associated with it then my xref ticks regen to blue. This only happens with the tick not the text.
View 8 Replies
View Related
Nov 21, 2012
We are having an issue with CAD users putting their xrefs on any layer that is current; thus creating some layer control issues. I would like to make it so that when they go to attach an xref the layer is automatically set to the "XREF" layer and then possibly reset to the previous layer.
View 2 Replies
View Related
Nov 17, 2011
I have a drawing of a floor plan, and on a separate drawing I have text that I need to add to the floor plan drawing.
I've used the XREF command and positioned it exactly where it needs to go, but I can't edit the text drawing unless I "Open XREF in place"
I got close by going to the XREF dialog and "Binding.." the drawing as an INSERT and now it's one huge block.
I'm trying to insert the drawing with the text on the drawing with the floor plan so it's one drawing and so I can edit the text or move things around if I need to.
View 5 Replies
View Related
Apr 5, 2011
I am using Auto Cad 2011 and I always use the option to 'attach' xrefs. what is the difference between attaching and an overlay? Does one use less memory than the other? When would be the best time to use an overlay?
Also when my new version was installed when I bring in an xref the layers show light (I really like this) another girl in our office has the same version but her layers are still saturated. how does she change it to show ghosted layers in the xref?
is there a way to not have the long list of xref layers when I bring them into a drawing?
View 3 Replies
View Related
Mar 27, 2013
I want to make a layer from external reference current.
I tried to identify it with its full name, but I got an error: eInvalidInput. So I found out, I have to use only the part behind the pipe.But then there is a problem, because this name is not unique withing the drawing.
Any number of xrefs can have such layer and also the drawing itself can have a layer with the same name. How exactly can I set a layer from xref current?
example:
layer from xref1: Xref1|LayerName1
layer from xref2: Xref2|LayerName1
layer from the drawing: LayerName1
View 6 Replies
View Related
Mar 7, 2013
How can I create a layer on my xref so it doesn't affect othere sheets referencing my drawing without having to open a couple of hundred draiwngs. I know I can create my layer, freeze it, save my drawing, open all sheets referencing my xref and save them. Better yet, is there a setting I can use that makes my new layer pop up frozen on for all sheets while I work on my xref, on a newly created layer?
View 4 Replies
View Related
Feb 12, 2011
I want to delete Xref-dependent layer. AutoCAd says I can't delete them. I want to delete them.
View 9 Replies
View Related
Mar 31, 2011
My company uses tons of Xrefs - wonderful, however problem comes when having to navigate through 100's of layers to get to the main drawings layers. So I tried using the layer filters to just show my main drawings layers. Here is the problem, I you can select show all layers, not good, can select just the xrefs (show all of them or show just one of them, etc...), or you can show just the used layers - I tried that, but when you create a new layer it is not included in that filter. I tried setting up a custom layer filter, however, I don't know how to right the name or what selection to make that would allow me to exclude a set of layers.
View 9 Replies
View Related
Jun 18, 2012
I'm using CS4. I have multiple layers of text and I want each one to have a different drop shadow effect. When I try to chnge the settings of one layer's shadow, all the layers change. Is there a way to stop this?
View 2 Replies
View Related
Aug 7, 2012
Is there a way to set up a layer filter to strip off the xref name?
I have standard layers in all my drawings. I want to use a filter to setup the type of drawing.. i.e erosion control.
However, from project to project the xref file name changes so filters don't work with the new name...
Anyway, if there is a way to hide the xref filename from the prefix of the layer.. if so, a standard layer filter would grab all the layers with the same name.
Civil 3D 2012 SP2
Win 7, 64 bit
View 4 Replies
View Related
May 1, 2013
I work with bridges and get xrefs from our road designers containing hundreds of layers. I'd like to point at an object in these xrefs and get the layer name. Is there a simple way to do this? The way the LAYFRZ-command works, freezing a single layer, I figure ACAD should be able to just return the layer name instead. Does this functionality exist?
View 2 Replies
View Related
Jul 20, 2011
I have a Xref with multiple Layer States,
I xref'd it into a sheet with Floor plan Layer States,
nowi want to Xref it in again with the Ceiling Plan Layer Staes.
Just to be clear i want the same Xbase Xref'd in a sheet twice with 2 different layer states. how do i do this????
View 4 Replies
View Related
Aug 17, 2012
My question pertains to layer colors from xrefs that have other xrefs nested inside them.
When I get xrefs from the architects, I get a building layout, RCP, space layout, etc. I tie all these together into a single "architect base" xref so I don't have to attach 4 xrefs to each new file I create. What I would like to be able to do is set all the layer colors in the misc. architect xrefs in my "architect base" file and have those color settings propagate into my drawings as I create them. This comes into play especially if I have to create a new drawing late in the project, and I don't want to have to go set hundreds of layer colors individually. ?
Visretain comes to mind, but visretain (if I'm correct) is really for keeping xref color settings in your current file from session to session, not in a new file that you are creating using an xref.
View 5 Replies
View Related
Apr 10, 2012
As I recall, in previous versions of AutoCAD, when I am in the Layer Properties Manager and I click on an xref under the Xref heading, the only layers shown were the ones in that xref, not all.
That is what is happening now. I cannot seem to find any setting under the settings for the Layer Properties Manager that would change this.
View 3 Replies
View Related
Aug 16, 2011
For the whole project we’ve had this issue, however it’s never effected our drawing until now.
When we receive an background, we use setbylayer to change everything to by layer, then in the layer manager, set the layer colour to 8, so all is grey.
Then we xref that background dwg into our model drawings and doodle all over the thing, pretty standard stuff.
But today, in our model drawing, I’d like to change, well, any of the xref’s layer colours, but I cannot! As soon as I make a change, it reverts back to the original ‘8’ colour. It refuses to change colour.
I’ve changed visretian from 0 to 1, open, closed, changed it again, all combinations but to no avail.
I can freeze, turn off & on layers, just not change the colour (or lineweight).
View 3 Replies
View Related
Nov 8, 2011
I have a drawing with an XREF in it and both drawing have items on layer 0. Is there a way of freezing the items in the XREF drawing that are on layer 0 but still layer 0 on in my drawing?
View 8 Replies
View Related
May 24, 2013
Is there a way to revert back to the original colors of an xref besides having to reattach the xref and purging the DWG.
I always change the colors of the projects Existing site/utilty XREF to color 252 to shade it back to have the proposed show up darker. But I try to select all layers to change the colors back to what they were before and the box to set color by layer is not available.
View 5 Replies
View Related
Aug 31, 2013
Do the people that develop (anti-endusers ) the upgrades ever think like an end user? Having the Layer Properties Manager set up with default filters that show "ALL" layers or "Xref" layers without a default for "Layers Local ONLY" is so counterintuitive and non-user friendly! This is just another example of how Autodesk has absolutely no regard for the end user.
View 2 Replies
View Related
May 20, 2013
Why does the layer control toolbar always state the Xref layers by default. Is there a workaround, or a setting so the layers of the current drawing are displayed by default?
View 2 Replies
View Related
