AutoCad :: Mirrored Blocks With Attributes Move When Scaled
Apr 3, 2012
We have a drawing here that involves many annotative blocks mirrored to create a layout, then on reopening the drawing the annottaive text of the blocks that have been mirrored are in the correct place but the objects have 'pinged' off the layout,
Have a look - if you change the anno scale to any scale you will see the blocks but change to 1:50 (the scale i want it at!) they shoot off to the left of the layout (outside the defpoint rectangle).
View 6 Replies
ADVERTISEMENT
Dec 17, 2013
I'm working on a dynamic door block, which allows me to add some height and width values to the door. everything works fine when I put in the attributes right away when I insert the block. Only if I want to mirror and stretch the block before I enter the values they want move to the correct position. After I run "attsync" it moves to it's correct place.
View 3 Replies
View Related
Oct 16, 2012
When I insert Annotative blocks and change the scale drawing (E.g. 1:100 to 1:200), attributes of Annotative blocks move to anywhere. I tried already ANNORESET and ATTSYNC, and it solved at that moment. But when I close and open the file, the problem appears again. I have to apply ANNORESET and ATTSYNC every moment. How can I definitely solve this problem?
View 4 Replies
View Related
Feb 10, 2013
My entire office has been experiencing drawing crashes as a result of moving or copying certain blocks within a dwg. The problem seems to occur only while executing a Move or Copy command on a block with attributes, and zooming or panning while doing so. My heart sinks instantly because the block will disappear when placed, and I know I am doomed to crash.
I am usually able to pan or zoom a few times, and if I act quickly a Save will work before the drawing then crashes. We have recently switched from 2011 to Civil 3D 2013, and the problem still persists. The two culprits are our slope arrow block as well as hex call-out. Both blocks contain attributes and are frequently used through out our drawings, and this problem proves to be most frustrating when pressed for a deadline.
View 5 Replies
View Related
Mar 12, 2012
I have a dynamic block that I am trying to add some pretty basic functionality to (at least it seems like it should be simple!). Since I’m still relatively new to DB’s, I figured I’d give some background on what I’m trying to do, cause maybe it could be done with a much easier approach than I have come up with. So if you don’t feel like reading the details, see the fourth paragraph for my actual question.
The block is a sheet reference annotation (that shows: SheetNum/TotalNumOfSheets) that we typical put in the notes section of our construction drawings. It looks nice when the text (which are attributes), lines up with the text in the note (usually Mtext, but sometimes a Mleader). So I constantly find myself completing the tedious task of placing the block at the insert point of the Mtext (which is always justified LEFT TOP), and then calculating the distance down to line that I want the block to line up with.
So what I want the block to be able to do is to be able to have the user grab the block by its basepoint, place it at the insert point of the Mtext object, and just enter the text height of the Mtext note, the line space factor, and the target line of the note that the sheet reference block should line up (the input would all be done via custom block properties in the Properties Palette). And since we almost always use a text height of 0.125 and Line Space factor of 1, those will be the defaults, and really the only thing that would need to be entered would be the line number of the Mtext that the annontation should line up with.
I already figured out most of the constraint parameters necessary and calculated the offset equation using custom parameters. I have all the linework moving correctly using the vertical constraint parameters, however, I cannot figure out how to get the Attributes to move along with the linework. I know how to move text and attributes using Action Parameters, but I can’t do it with Constraint Parameters. So I figured that maybe I could chain an Action Parameter to the Constraint Parameter, but I couldn’t figure out how to do this either. Also, I am using visibity states and would like the visibility grip to move along with everything else as well.
My block is attached. I used some lines for the Constraint Parameters to be associated with, but they are only there for the block to operate correctly, therefore they are invisible in both of the visiblity states. Probably not the best way, but it works.
View 5 Replies
View Related
Mar 30, 2012
For our bespoke AutoCAD plugin we can not use mirrored blocks or those with extrusions.
I know I can find mirrored blocks by quick selecting scales of less than 0, is there a similar way to select blocks with a negative extrusion?
Even better would be a process (LisP?) to select all the blocks that are mirrored or have negative extrusions.
View 9 Replies
View Related
Feb 27, 2013
I've got a block that I want to scale in pspace, but I would like the attrib height to remain constant even at different scales. I have used annotative blocks in vports with much success, but I would like to do the same thing only in pspace.
View 8 Replies
View Related
Mar 27, 2014
I have about 4 TB of images on an external drive: a DROBO (call it D1). I have another DROBO (call it D2) that is a mirror of D1 updated hourly by Chronosynch. How can I (hopefully easily) tell Lightroom to now use D2 instead of D1?
View 2 Replies
View Related
Jul 8, 2011
I have several pillars that I want to scale down to the same size, but I don't want to have to scale them individually or reposition them once I'm done. Is there any way to scale them all without making them move along the axis being scaled? (I should have made them instances of each other. My only problem there is that I couldn't reposition one pillar without moving the others. for future reference, is there a way to temporarily break the instance relationship so on can be edited?)
View 2 Replies
View Related
Jun 14, 2012
Is it possible to mirror a rotation within a dynamic block?
See the attached drawing. I am trying to have two rotations within a dynamic block, but only one grip. When the grip is rotated one half of the block rotates while the other half rotates in reverse. The resulting action would be much like the wings of a butterfly.
I have tried many different combinations of parameters, actions and constraints with no luck. The block in the attached file was as close as I could get. Have I reached the end of what AutoCAD is capable of?
View 7 Replies
View Related
May 19, 2013
I'm looking for a map tool that can convert feature data from an SDF file or SHP to autocad block's with attributes data. My client just want blocks with attributes and dont work with sdf or similares, they extract the attributes and then work them in other software, so, i wonder if there is a autocad map tool that make the conversion from feature data SDF to blocks with attributes, that will make the work mutch more easier and fast.
Other question relational with blocks. How can we link block attributes and excell in real time, where i could change cells data in excell and the update happens in the open drawing and vice-versa?
And would like to know if there is a way to make this happen without vba tools or lisp's...just with map tools.
C3D2011
MAP3D2011
View 6 Replies
View Related
Jul 25, 2013
some attributes you can double click and edit within the dialogue box, others you have to double click and they are greyed out in the box, you have to click the little button with ... on and edit in place on screen... why?
whats the difference between the block atributes? attached is an example...
View 5 Replies
View Related
Mar 20, 2012
I'm working on creating some blocks for our office. Basically it is a simple block with a few lines that remain and then a couple attributes you can click on and change. I have added the attribute and all is working well.
My only issue is I would like to make the text in the attributes to be bold. For some reason I can't see to do this. Is it not possible.
Basically I want to try and get some of the attributes to stand out more than others. I tried changing the color and the lineweight of the attibute (which worked the color is different) but when it prints it doesn't change at all.
View 2 Replies
View Related
Aug 3, 2013
I am looping over a set of 40000 entities converting them to blocks and adding 35 attributes to each block. Till here its fine my .net program converts to block and write atributes to each one of them in 2 hours. But after the program finishes and I try to save the file autocad takes ages to save the file and also it stops responding. Is autocad not able to handle 40000 blocks with attributes. I am using autocad 2013. The dll has been developed using visual studio 2010.
View 3 Replies
View Related
Jan 16, 2012
I am trying to create a dynamic block with two attributes, a double grid head, when I add a stretch parameter to the head it only affects the first assigned attribute.
I have added a stretch parameter to each attribute and only the firt attribute will move. What are the rules with attributes in dynamic blocks, the only thing I found was I have to lock posistion for attributes to be affected by the paramter assigned by the dynamic block.
View 2 Replies
View Related
Apr 12, 2012
I have a large amount of P&ID drawings that have blocks with attributes. One of the blocks is missing an attribute field that I need so I recreated the block using the same name and added the missing attribute. When I reinsert the block and say "yes" to updating the block's definition within one of my P&ID drawings everything seems fine except when I try to edit the block to fill in that field.
The newly added attribute doesn't show up but when I right click one of these blocks and select Block Editor the new attribute field does shows up so the redefine did work I just can't use that attribute. Is this a bug in AutoCAD? How I can use this attribute?
View 2 Replies
View Related
May 7, 2013
I have an access database attached to a blank drawing. The database is a list of existing oil wells. I want to have civil3d (or map) create a custom block (I already have the blocks created) inserted at a coordinate in the database and propagate the other fields in the database into attributes in the blocks. For instance, the first two fields in the database are the x and y. Some of the other fields in the database are the well status and company name. Is it possible for Map to read the first two fields to know where to put the block, then select the block to insert based on wells status and company name, and then complete attributes from the other fields (section, township, range, county, etc) into the block? I'm having a hard time getting my head wrapped around the map3d user's guide talking about topologies, link templates, object classifications, etc. Using Civil3D 2013 infrastructure design suite, Win 7 64-bit, office 64-bit.
Dell Precision T3600 - Windows 7 64-bit
NVIDIA Quadro 600
Intel(R) Xenon(R) CPU E5-1607 0 @ 3.00GHz 3.00GHz
8 GB ram - Two 1TB raid
View 8 Replies
View Related
Nov 2, 2012
Every time I try to update blocks with attributes of a given layout, this only updates the last active layout. example:
I have three layouts: Layout1, Layout2 and Layout3
layout of the three blocks I would need to update the reference but I can Layout1 default that always takes the last active layout. In the following paper space specific code, but as it would to tell a particular layout.
Private Sub UpdateAttributesInDatabase(ByVal db As Database, ByVal blockName As String, ByVal attbName As String, ByVal attbValue As String) Dim psId As ObjectId Dim tr As Transaction = db.TransactionManager.StartTransaction() Using tr Dim bt As BlockTable = DirectCast(tr.GetObject(db.BlockTableId, OpenMode.ForRead), BlockTable) psId = bt(BlockTableRecord.PaperSpace) tr.Commit() End Using UpdateAttributesInBlock(db, psId, blockName, attbName, attbValue) End Sub
View 5 Replies
View Related
Mar 22, 2012
I'm trying to set up a dynamic block with an attribute/field within it that the user(s) edit using a lookup table.
I understand basically that a field must be created as the attribute that then references a lookup table with the inputs listed. However, I really do not know how to create a lookup that has custom information such as below:
Site: Unit Code
Site X 100
Site Y 200
Site Z 300
All I have seen explains how to create a lookup from an existing parameter (liner etc) and I don't seem able to create something specific to my requirements. I forgot add that I want the user to see "Site X", "Site Y" etc in the dropdown - but the attribute to reflect only the Unit Code.
View 9 Replies
View Related
Jan 9, 2014
I need to know if there is a way to link an attributed F-N bubble with qty's to the BOM. This is for electrical wiring diagrams for aircraft. So I have serveral part numbers to a BOM, but no real accurate way of finding total quantities other than manually going though the drawing.
View 2 Replies
View Related
Dec 9, 2012
I am trying to create an attribute that displays the product of an Area of an object in the block and the value of a different attribute. For instance, here is what makes up the dynamic block:
1 rectangle (with width and height parameters and stretch actions)
1 Attribute called "ForcePerSQIN" - the value of this is entered separately for every instance of the block by the user
1 Attribute called "Total Force"
In the "Total Force" attribute, I want to create a field that contains a formula to multiply the area of the rectangle (which I am able to obtain with no problems using the Area property of the rectangle object type) by the value of the "ForcePerSQIN" attribute, which is user-defined. The problem I have is that it appears as if the value of this attribute is treated as text and thus cannot be used in the calculation; I get ######.
Is there a way to make the "ForcePerSQIN" parameter treat the user-defined value as a number instead of text so that it can be used in the calculation? Or is there a better way to accomplish my ultimate goal?
View 4 Replies
View Related
Oct 7, 2011
I have been making blocks Annotative by using block Editor. I would open block Editor and change the block property to annotative. When I do that I notice that the block's attributes become unreadable. The block's attribute appears to become so squished up the I can't read it. I have tried to change the attributes width to make it readable but that does not work.
View 3 Replies
View Related
May 23, 2013
At each projects, i need to copy and paste the values of attributes of all instances of a type of block in my drawings, paste them in a excel sheet, it take so much time and is possible to make errors.
Is there hints to read a DWG as a text file and retrieve the attributes values of all these blocks ? I would give special names to these blocks, and also specific quantity of attributes, to work.
I meant Excel VBA, not AutoCAD VBA, cause i will manipulate excel sheets depending on the results.
View 1 Replies
View Related
Mar 6, 2012
I am looking for a macro that can edit the default value off the attriburte for each block in the drawing. The new value must be empty.
But there is one exception. When the length of the current value is equal to 8 then the macro's has to do nothing and the macro must continue to the next block.
View 5 Replies
View Related
Apr 4, 2012
Just wondering how I would return attributes of blocks in my drawing's XRefs?
I've come across one example that is in VB but no luck.
I currently have a list in a form that consists of all the XRefs in my drawing and I wish to return all blocks and attributes that are linked to the selected XRef.
View 7 Replies
View Related
Feb 6, 2012
I'll try to import a text file with a string: pointnumber, easting, northing, elevation, discription, but I get very big blocks and attributes in my drawing. I use Autocad 2011 Map 3D, on a windows XP OS. I'll importing the text string with the import command. Easting and Northing are for the position. The Elevation, pointnumber and discription are attributes from a block. I can only choose a block: "Map_Survey_point" This is the only block I can choose. When I import the text, the scale from the importing blocks are too big. How can I change the size of the block and attributes?
View 4 Replies
View Related
Oct 17, 2012
I just have a quick question (hopefully) about an activity I want a Dynamic block to perform.
I have a simple electric switch block (a line with an S over it), that in some cases is enclosed by a simple rectangle. When the switch is enclosed, I'd like the attribute to move further, to keep the spacing the same.
Is there a way to make the attribute move automatically with the display of the rectangle, maybe through some combination of Linear Move parameters, Visibility parameters, and a formula?
View 9 Replies
View Related
Nov 21, 2013
Is it possible to increment text or attributes in a dynamic block? I'm want to create elevation text for grids that can start at a certain value and increment up or down from there.
View 1 Replies
View Related
Feb 15, 2012
I have a drawing with a bunch of blocks. the blocks repeat themselves, but I need to define different attributes to each one of them and then being able to extraxt a list that I can read in excel.
View 7 Replies
View Related
Sep 19, 2013
Using LT 2014 on Win 7 Pro.
Recently got a new PC and due to problems with regular LT crashes I have recreated my customizations etc. from scratch.
Finally seem to have got everything working OK and how I it was on my old PC, other than one minor issue.
I have edited the CUI so that the "old" attribute editor (ATTEDIT) is launched rather than the enhanced (EATTEDIT) version.
However after double clicking a block a further third click is required to select block/launch editor.
Editing CUI back to EATTEDIT works ok with only a double click required.
View 9 Replies
View Related
Aug 7, 2013
I believe in our previous AutoCAD 2009 software we could create a block with attributes and save the drawing as a block, either wblock or create block. When inserting this block into another drawing we would get the attribute dialog box appear and complete the required information. Within AutoCAD 2012 we have made a block with attributes, when we insert this drawing into another drawing the block is inserted but no attribute dialog box. If I click on the block I see edit block definition dialog box with the drawing file name of the block and the block name. If I explode the block I then have my block and when clicking the block the attribute dialog box appears. It seems that in AutoCAD 2012 when we create the block and save the drawing and then insert the drawing it becomes a nested block type. Is there a setting I need to switch to prevent this and have the block insert and then click on it to change the attributes as required?
View 5 Replies
View Related
