I have a drawing in paper space. When I move the drawing the dimensions and texts do not move with it. Is there something I can use where the dimensions and stuff follow the drawing .
View 9 RepliesIs there any way I can make exploded dimensions in an old drawing become live dimensions again.
View 3 Replies View RelatedI produce windows and doors. and I reproduce the same drawing in the attachment a lot.
Is there a way to make it a dynamic block where I change the three dimensions in the drawing and the whole thing grows or shrinks symmetrically and proportionally?
I know you can obviously set the tolerance in the styles to round to the nearest 1/16 or 1/32, but is there a way to make it always round a dimension up instead of to the nearest? IV2012
Windows XP SP3 32-bit
Intel Core 2 Duo 6400 @ 2.13 GHz
Nvidia Quadro FX 3450/4000 SDI 256MB Vram
2 GB Ram
160GB HDD
I am having some issues with sheetset. The pdf name is name of the drawing + name of layout.
1. The sheet sets do not follow the order of the drawings layouts
2. The list is not according to the drawings order in the directory
3. The sheets are automatically combined when I want them to be separate
4. There are numbers 1,2,3... automatically prefixed to the sheet causing additional trouble.
I need to have a regular (linear) gradient but instead of going along a straight line, it should go along a custom made, freehand bezier path, observing all the turns or angles on that path.Is it possible in PS?
View 1 Replies View RelatedI am trying to make a straight image follow a curve and I cannot figure out how to do it. I want the checkered image to folow the curve on the blue image.
View 11 Replies View RelatedI am designing an advertisement and I wish to make a line of text "pop out" from a vanishing point just below the text.I had considered playing around with the Perspective Grid, but even if I could get the extrusion working this way, the text would have to "lean" back.
View 3 Replies View RelatedHow do I make CC Particle World follow a path I create with the pen tool in AE CS6?
View 2 Replies View Relatedhow do I make the layers of the image follow the contours of the book background to make it look more realistic like it is text in the book? I have an open book background and I want all my layers in the xcf file follow the curves of the book, how do I do that?
View 4 Replies View RelatedHow do I make a custom brush shape follow the contour of a path made with the Pen tool?
View 2 Replies View RelatedI have recently gotten Autocad 2012 and played around. I am trying to figure out how to make the dimensions of a line that you are currently drawing show up in standard units (feet inches). Right now it shows up as numbers with decimals. I tried DIMSTYLE but couldn't figure out what to change.
View 4 Replies View RelatedI am rotating my viewports in models space, but can I make my dimensions follow the proper rotation as well? with out messing with it in paperspace?
View 9 Replies View RelatedI use Cad for Mac 2011. I made this "3d"-wire drawing to find out the angles of an object. Now when I make an angular inquiry the value given is right. When I try to put in an angular dimension it does not work. I put in a screenshot here to be more clear. This is the situation viewed from southeast:
Agular dimension.jpg
So, the angle I want to put the dimension to is the one between the red lines. When I choose "Angular Dimension" and then pick the two lines the dimension is automatically put on the two white lines next to the red lines. While the verteces of the dimension lay on the picked red lines the arrows point to the white lines and the value given also refers to them.
I would like to ask a question about dimensions in 3D drawing being placed on one plane. I have a 3D drawing, and when I draw a dimension, it gets placed by the program on the XY plane. The dimensions do not stay along the dimensioned objects. see the attached picture. For example, you draw a line from [1,1,1] to [3,3,3] and then dimension it. The dim line is placed to [1,1,0]-[3,3,0] instead of along the line.
View 9 Replies View RelatedIs there a way of having different size dimensions on the same drawing? when i go into Annotate, then dimensions and change text size it changes all of the dimensions. in other cad packages i've used you can change selected text and so on a drawing you can for example you can have some text at 100mm and some at 25mm.
View 2 Replies View RelatedDimension elements do not appear clear on the screen. I want to Imaging the screen to use the image in another. How do I make the dimensions clear ?
WTXvZ.jpg
[URL] ......
I'm trying to reposition dimensions in a drawing through the API. The output of my code seems to indicate the method is working, but after it runs the drawing is unchanged. Here's the code (in VBA):
Dim oDoc As DrawingDocument
Set oDoc = ThisApplication.ActiveDocument
Dim oSheet As Sheet
Set oSheet = oDoc.Sheets.Item(1)
Dim oLdim As LinearGeneralDimension
Dim oLeaderNote As LeaderNote
Dim oDimLine As LineSegment2d ' Dimension Line
Dim oStartPt As Point2d ' Dimension Line Start Point
Dim oEndPt As Point2d ' Dimension Line End Point
[code]....
Looks like it moved my vertical dimension left, but it doesn't actually do anything. Is this not a viable method for repositioning a dimension?
I created a sketch then tried to retrieve dimensions in a drawing from the sketch. When I used the retrieve function, no dimensions appeared. I made sure that the box in the Application Options under the Tools tab was checked for retrieving all dimensions upon placement. I have tried numerous ways to retrieve the dimensions, and while I can place them manually, I really need to be able to retrieve all at once as seen on the sketch.
I have been able to use the retrieve function before on files that I downloaded from a website so I know to use the function.
I'm attaching a file which I am having trouble retrieving dimensions. I am using Inventor 2013 educational version.
I am unable to see the dimensions that I measure using power dimensions as per the attachment on the drawings itself. If i want to see it, I have to select the green line, and right click and select the line and select standard as the dimension style. I did not have to previously do all of this.
View 1 Replies View RelatedI'd like to take a set of ordinate dimensions and multiply all the values by 10. Is this possible, without overriding the values and making them static?
The reason I'm asking is because I'm making a flat layout sketch for pockets around a drum. So imagine taking a drum and rolling it out flat. In the direction along the drum I drew it as 1" = 1" and for the circumfrence direction I did 1" = 10° so I don't have sketch that is 13" x 360". So I need to scale the dimensions in 1 direction up by 10.
I got a new computer recently and installed Inventor 11. I found I could not change the drawing dimensions (It chanced in the Edit Box and shown the changes in the dimensions, but after click "OK", the Edit Box closed and the dimension did not change).
I remember there were the similar problems before and I installed KB918118 fixed it. So I tried to install KB918118. But my computer shown a message saying my computer system is newer and do not need the KB918118 update.
I am wondering how best to apply drawing dimensions to a view. I am using VBA (Inventor 2010 x64) to modify a template skeletal assembly and save it. I have succeeded at generating the models, drawings, and drawing views, but have hit a wall when I attempt to automate the process of applying drawing dimensions.
I attempted to use GeneralDimensions.Retrieve with the DimensionsToRetrieve parameter, as I wish to retrieve only a few dimensions. My testing, however, indicated (and the helpfile confirmed) that the DimensionsToRetrieve parameter only work if the DimensionConstraint objects belong to a drawing sketch, and I'm retrieving dimensionconstraints from a model sketch. It appears to me that I will have to retrieve all dimensions and then somehow delete the unnecessary ones. This seems unusual to me--is there a better way? Can I, for example, retrieve a single dimensionconstraint at a time from the model rather than all of them at once? Perhaps its suitable applying drawing dimensions without retrieving them from the model?
I got a new computer recently and installed Inventor 11. I found I could not change the drawing dimensions (It chanced in the Edit Box and shown the changes in the dimensions, but after click "OK", the Edit Box closed and the dimension did not change). I remember there were the similar problems before and I installed KB918118 fixed it. So I tried to install KB918118. But my computer shown a message saying my computer system is newer and do not need the KB918118 update.
View 4 Replies View RelatedI have an existing facility drawing that I'm trying to edit and when I try to dimension something it disappears after I click enter for the final time. I've tried to explode the drawing numerous times, save it in different formats, and copy and paste it to a new drawing. Nothing seems to work. How can I get the dimensions to show up?
View 9 Replies View RelatedI use parametric base-model which automatically generates drawing (look "Pic1"). I change parameters I need and new drawing is generated (scale stays the same). However, dimensions on new drawing are displayed in random way (look "Pic2"). Is there a way (iLogic, VBA or smth els) to fix/link dimensins so - that they could stay in an appropriate way (space between dimensions, space between dimension and edge, dimension is centered on line with arrows) when the model size is changed (in this example I have changed the base diameter from 830 to 1280)?
Function "Arrange dimension" does not solve the problem!
As advanced as my AutoCAD skills are I don't know how to specify the dimensions of a rectangle or square yet. How to know the prompts I need to follow after typing the 'rec' command in?
View 6 Replies View RelatedI am using a 2007 autocad version,is it possible to take dimensions like radius and angles on a 3D drawing?
View 1 Replies View RelatedI have a basic drawing with dimensions A, B, C, D & E. Can those dimensions be tabulated in such a way that they can be altered within the table so that the drawing redefines itself in line with the new dimensions?
View 3 Replies View RelatedI am doing a drawing on inventor and everything is going great except for the fact that the dimensions are hard to read because they are so small. Is there any way to make the font for the dimensions bigger.
View 8 Replies View RelatedMy drawings is in milimeters and dimensios show also in milimeters, how can I make dimensions to show in meters?
View 2 Replies View Related