AutoCad :: Cannot Drag Drawing Left To Right Situated Tile Vertically
Sep 30, 2013
Have a drawing I would like to drag from one window to the other while aligning it from left to right using the Tile Vertical command. After selecting the whole drawing and seeing the drawing in blue grips. When ever I try to drag the drawing from one window to the other I just a couple of lines at the most in the new window. Asking if there is another way to get around this without dragging.
I have Architecture 2009 and my computer needed to have my profile rebuilt. Now I am unable to tile my acad drawing horizontally or verically like I used too. I tried to rebuilt the file and reinstall but that doesn't seem to work. Also rather than opening at least 2 drawing (or more) now results in seperate sessions rather than 1 session with 2 or more files. What the setting is that I need to update?
I use tile on 95% of my jobs. It is a waste of space when I tile all vertical pictures because I do not have the choice of Tile Vertically or Tile Horizontally as on previous version of Photoshop.
I tried the different choices offered on "arrange document" and there is non with the vertical choice, unless you choose one that displays my photos some on one size and the remaining or two or three remaining, a different size to fill up the screen.
With either Photoshop CS6 or Photoshop CC, opening an unadjusted image of a building and applying Image/Duplicate produces an exact duplicate of the image. If arranging the images using Window/Arrange/Tile All Vertically (or Window/Arrange/2-up Vetical) one of the images will present with a perspective correction. Whichever image that was selected when Arrange was applied receives the perspective correction.
I s there an efficient way of stretching an object. Usually I drag my mouse from right to left, thereby selecting objects that my selection box just touches. I want to drag my mouse from left to right so that only the vertices which are inside my selection box get selected.
(XDPX9) - Can't seem to get it to react. I followed both variations of how it's done...
1. Drag the adjoining X & Y at the top left corner of the ruler.... dragged down. Nothing.
2. Page properties - Grid and ruler tab... changed the Y Coordinate. Nothing again.
Made sure 'page' is not 'locked'. All pages same size. Been at it for over an hour and have decided I'm either missing something or maybe I found a bit of a bug?
I am using CorelDraw 12, and recently when I try to drag a drawing, I do a left click and drag. But in doing so, depending on how far I move the object, and how long I hold the left click down, it will just continue making duplicate copies of my object. So as I drag the object, it is also copying. I have had to restart my computer to get it to stop, but this is getting old.
how to disable the drag copyiing? Everywhere I have looked, I find that people are right-clicking, so to clarify, this is a left click issue with my mouse.
im used to opening up two drawings simultaneously, and i used to drag & drop entities with one another but for some strange reason i cannot do this drag & drop thing anymore with my drawings, i tried to use ccleaner to clean up the clipboard, tried searching it here and googling it but still cannot find any clue.
i can't drag a block from the design center into any drawing. i have to go into the design center right click on the block, click copy, then go back to my drawing and paste the block. this has just started happen, before i was able to drag and drop with no problem. there is no error message the only thing that happens when i try to drag a block from the design center is when i'm back in the drawing the cross hair has a circle.
I need to mix left to right and right to left (hebrew) text in a textbox. How can I do that? If I copy/paste hebrew text the text is inserted as if it was left to right, that is: reversed. Can I somehow work around that?
I just bought Photoshop CS6 and it seems that it isn't working properly. I run Windows 7. The left click and left alt are not working. The buttons work perfectly on other programs.
In my Adobe Premire Pro CS6 project, When I select a clip that I want to drag down into the editing section it only allows me to drag the video and NOT the audio. I need both video and audio and it wont let me, I don't think I clicked anything wrong but
I would like to change all the DOCUMENTS of the Tile Mode to 0. But, the following code the Active Document changes only. How can I modify the code?
Dim acdc As DocumentCollection = Application.DocumentManager Dim acdoc As Document = acdc.MdiActiveDocument Dim acTile As Integer = Application.GetSystemVariable("TileMode") For Each acdoc In acdc If acTile = 1 Then Application.SetSystemVariable("TILEMODE", 0) End If Next End Sub
I need to create a hatch pattern for a flooring tile that we have currently starting using and I am having real issues getting it to work!! The pattern is meant to be tiles set in a brick type style but with a rolling offset, but the tiles are different sizes - I have one row of 300x600, then a second row of 148 x 600, then another row of 300x600, then another 300x600, then a row of 148x 600, followed by another 148x600. This is the pattern end and needs to repeat itself. I have attached a line drawing of what it needs to look like.
I can get a very basic line drawing showing 300mm and 148mm for the first two lines but then it all goes wrong!
I am test driving LT2000i and currently use AutoSketch.
I do not own a plotter and would like to know if It is possible to "plot tile" a 24 x 36 into 8 pages of 8 1/2 x 11 for printing from a Cannon C3500. If not, do you have any suggestions on how to manipulate paper space to print 8 areas of model space to obtail the same result as "tiling" in AutoSketch?
i am trying to copy 3dpolyline vertically then create another line connecting between the start of each and join all 3 polylines and close them. i got a few hundred of these so programming is key.
can't figure out what's wrong with the code. got all the codes for cloning and create the new 3dpolyline with 2 vertices ok. but just won't join.also tried to going through all the vertices of the new polyline and join. but can't figure out how to read vertices on 3dpolyline.everytime programming something always get stuck at the end. pretty used to it already.
Private Sub btn3dpolybox_Click(sender As System.Object, e As System.EventArgs) Handles btn3dpolybox.Click Me.Hide() 'select 3dpolylines Dim ed As Editor = Application.DocumentManager.MdiActiveDocument.Editor Dim prSelectionOptions As PromptSelectionOptions = New PromptSelectionOptions Dim prSelectionRes As PromptSelectionResult = ed.GetSelection(prSelectionOptions) If prSelectionRes.Status = PromptStatus.Error Then Me.Show() Exit Sub End If If prSelectionRes.Value.Count = 0 Then Else Dim acDoc As Document. [code]....
For years we have been using a prompted entry in our drawings for the sheet number. E001
We have also been changing the sheet name in the browser to match this. If the sheet number changes, we have to change both. Can the sheet name from the browser be used in the tile block? I couldn't seem to locate it under any of the properties.
Our ultimate goal is to use Ilogic to read and write the sheet numbers from a master Excel sheet. I haven't been able to find any reference to Ilogic working with prompted entries.
Isn't there a terra cotta 12" flr slab that comes w/ the program? I could swear I've seen it before, but I opened up the imperial Slab & Slab Edge Styles dwg and there isn't a tile slab (or material) in there?
is there a way to create a few profiles say at 0.5, 1.0, 1.5 and 2.0m vertically above the profile of the ground? without creating the surface again and change the elevation 4 times and making 4 data reference. using those lines for design guides for minimum fill requirements when doing FG profiles. before i just copy, then explode then move the original profile as a polyline. i actually have to explode the polyline after because it's laggy to zoom in the profile for some reason. once lines it's ok. but then again it's not dynamic. i changed my alignment and then those line stayed then have to do it all over again. this maybe a good feature to have next version.
Civil 3D 2012 Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2 Home: 3930k, 12GB, GTX 590, U3011, QX2710
I need to create mtext with various size fonts and have them center vertically along a line. I can do this with two mtext objects, but would rather have them all in one. When I try it in a single mtext object, the bottoms of the letter align even with the justify set to middle center. How can I get one mtext object to align vertically along the centerlines?
I need to select a block in AutoCAD, and move it up or down vertically. I can get to the point where I have the user select a particular block, but after that, how do I get a reference to the block selected so I can move it up or down?
Is there a way to align more than 2 objects either horizontally or vertically? I've used the ALIGN command and I can't get it to work. I get a message that says something like: "all 3 destination points are colinear".
I can get it to work if I'm just aligning two objects.
For instance, say you have four boxes, scattered around model space, and you want to align the left edge of three of them to the left edge of the fourth box, without moving them vertically. In other words, can you "left justify" all four boxes?
I want to use BO command for vertically long and thin objects. When i zoom in and the object is not completely visible in the screen and i click inside the object , AutoCAD says , valid hatch boundary not found. Is there a way to join polylines of such objects using BO command. I have to eventually resort to Pedit command which is bit tedious to do.
I find at least once every project I need to do something like this (skewing/forshortening). If I make a section view of a set design (cutting right through the stage), I'll do that by taking my set elevations and skewing them.
the solution, painstakingly outlined in VIDEO FORMAT, and annotated..?
When you get back up and running, here's a full demo of both the 2D and 3D methods described [URL] ......
I am upgrading from 2010 to 2013 and am having a problem with my image tile menu not showing my slides. The dialog box comes up but none of the slides can be viewed. I am using the macro $I=acadbja.GENPLAN1 $I=* Is there an updated command the super cedes this command?
I have a simple brick like hatch that is set to have a full tile at the origin of the hatch. All is well when the hatch is horizontalbut when the hatch is rotated within the hatch edit box it loses the origin and it won't set with a full tile.
How can I get the origin to be the same at any angle and the hatch start with a full tile????????
After offsetting a profile line vertically, lets say minus 5 feet, for design purposes, is there a way to take that new polyline that is created and making it a polyline so it can be smoothed. Almost everytime, the enginner has asked me to smooth out that polyline that I have offset vertically, because it is now going to be used as a pipe in the final design. I have been drawing a polyline over the top of the profile line, so it looks smooth........