I'm trying to find the point where 2 lines intersect. I extend both lines so they cross. But when I try to draw a point over where they cross & select intersection on the snap menu, it will not snap to where the 2 lines cross. I've attached the drawing.
View 7 RepliesI'm using AutoCAD 2013 x64 and VS2012 Express with ObjectARX 2013. Now I want to calculate the (projected) intersection point of 2 (intersecting) lines in vb.net
After selecting the lines I have this line1.IntersectWith(line2, Intersect.OnBothOperands, intpts, 0, 0)
In Visual studio express 2012 I get the following warning for the above line of
warning BC40000: 'Public Sub IntersectWith(entityPointer As Autodesk.AutoCAD.DatabaseServices.Entity, intersectType As Autodesk.AutoCAD.DatabaseServices.Intersect, points As Autodesk.AutoCAD.Geometry.Point3dCollection, thisGraphicSystemMarker As Long, otherGraphicSystemMarker As Long)' is obsolete: 'Use the overload taking IntPtr instead.'.
So, if I'm reading this correctly, this method is outdated and I should use an other method to calculate the intersection. But I really don't know what 'Use the overload taking IntPtr instead' means.
One of the things I found is a function that contains this line of Dim inters As Point3d = line1.IntersectWith(line2)(0). This one looks almost the same, but doesn't give me the warning when I compile the code, but this method crashes AutoCAD when there is no intersection between the lines. This is despite a try catch block that surrounds the code.
For now I just want to use lines, but I need to expand the code so it will also work with circles, arcs and polylines.
I'm trying to write a command that breaks polylines / lines along a polyline. Is there any way to
A. Find all intersection points of two polylines?
B. Break the polyline at points gained previously?
I wonder how to get intersection lines between two surfaces in Civil3D API. It seems that the "MinimumDistBetweenSurfaces" command in Civil3D can do this work. But I can't find corresponding API.
View 2 Replies View RelatedI'm using ACA 2008 and used to be able to pick two lines that didn't physically cross each other and use the trim command to trim them based on where they would cross if they extended to each other. But it doesn't seem to do it anymore.
Best way I can describe it is it used to trim at the apparent interest ion of where they would come together. I'm sure there's some easy fix to this, just don't know where it's at.
I Posted This problem twice but it doesn't showed in the forum. I don't know why, whatever, My problem is making Array with a circle and a line[same as to radius]. When i use array between them to create 9 more lines, some lines are becomes bigger then the original line. why this happen? I attach a file to be understand clearly. Zoom the intersection point of lines and the circle.
View 3 Replies View RelatedI'm running 2002 and I have a drawing with an array of lines (forms a grid ceiling, actually). With OSNAP on I cannot grab the intersection of these lines, however, it does work on other lines in the drawing, as it usually does.
View 9 Replies View RelatedIs it possible to select lines (maybe up to 6 lines) around an intersection point with a reference line. There is one intersection point and the lines are around it. And also, both the intersecting lines are in different layers.
How to get the ObjectARX's ArxDbg tool working on autocad 2012. ObjectARX 2010 sample project fails to open in VS2010 express.
In assembly mode, how can I click on two lines in a part sketch and get there intersection point using VBA?
View 3 Replies View RelatedWhat distinction is between “intersection” and “apparent intersection” in snaps,. I’m not sure what difference is between the “intersection” and “apparent intersection” in snaps.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I am trying to create an intersection design using the Intersection Tools in C3D 2012. I followed the steps in the tutorials, created a corridor on the major road, splitted the regions, created the intersection and added it to the major road corridor, and connect the regions with the intersection portion.
I used the same assembly throughout the design just for simplicity, however, i notice that there are gaps of curb between the curb return section and the through section (as outline in red rectangles).
When I check with DIST command both the ends of the line are with distance 0.00000000 to the region. But when I apply intersectwith method to them I get only 1 intersection. This is a sample only, I face this issue regularly.
Private Sub Button31_Click(sender As Object, e As EventArgs) Handles Button31.Click Dim R1 As AcadEntity = Nothing, R2 As AcadEntity = Nothing Ut.GetEntity(R1, "seç") Ut.GetEntity(R2, "seç") Dim inters As Object = R1.IntersectWith(R2, AcExtendOption.acExtendNone) End Subor Dim entMain As Autodesk.AutoCAD.DatabaseServices.Entity = tr.GetObject(id, Autodesk.AutoCAD.DatabaseServices.OpenMode.ForRead) 'Setup 3d plane and point collection Dim myPlaneWCS As Plane = New Plane(New Point3d(0, 0, 0), New Vector3d(0, 0, 1)) Dim myIntPntCol As Point3dCollection = New Point3dCollection() Dim myintptr01 As IntPtr = New IntPtr() Dim myintptr02 As IntPtr = New IntPtr() 'Get intersecting point collection entMain.IntersectWith(ent, Intersect.OnBothOperands, myPlaneWCS, myIntPntCol, myintptr01, myintptr02)
Windows 7 (x64)
AutoCAD 2012 (x64)
I'm trying to get the "Y" intersection of a line I construct and a given polyline using the following code.The debugger stops at this line that calls the function
intersectStartY = GetYIntersection(elevationLine.StartPoint)
The error message is "MissingMethodException was unhandled by user code"
Method not found: 'Void Autodesk.AutoCAD.DatabaseServices.Entity.IntersectWith(Autodesk.AutoCAD.DatabaseServices.Entity, Autodesk.AutoCAD.DatabaseServices.Intersect, Autodesk.AutoCAD.Geometry.Point3dCollection, Int32, Int32)'.
{code}
Public Function GetYIntersection(ByVal elevationLinePoint As Point3d) As Double
Dim intersectY As Double = Nothing
Dim intersectPoints As Point3dCollection = Nothing
[code].....
I have drawing with lots of pol)lines which are intersecting themselves.
I would like to divide all selected lines by the point of intersection.
I have this
[CommandMethod("BRA", CommandFlags.UsePickSet | CommandFlags.Redraw)] public static void TestIntersectAllLines() {
Document doc = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument; Database db = doc.Database; Editor ed = doc.Editor;
[code].....
But it seems to doesn't work properly - some lines are not erasing, some are not intersecting in each point.
Isn't there a command that allows you to pick 2 lines and snap to the point of intersection when dimensioning an object with a fillet/chamfer? Typically I o-track it with apparent intersection with no issues, but its a little more difficult when your working with sloped lines, tracking doesnt like to follow angled lines. (Maybe its inventor that I'm think of that can do this?)
View 3 Replies View RelatedI've started doing my first intersections but I'm stuck with one mistake. I did all daylights and curb returns for intersection.
I have a feeling that it's incorrect targeting here, isn't?
What is the best way to relocate and intersection (created with the wizard) from 43+00 to 40+50? I dragged the alignment but the return baselines don't seem to come along for the ride. Would it be better to bite the bullet and redo it?
View 3 Replies View RelatedI am "trying" to design a intersection that contains four lane divided road. Northbound and Southbound lanes are 2% normal crown with a curbed median. I have alignments for each crown. The intersecting road is not crowned. This road is a retrofit so I am limited quite a bit so the intersection wizard is out. We're going old school with this one.
View 2 Replies View RelatedI have a drawing file in AutoCADMap 3D 2011 consists of some administrative boundaries and city boundaries. Now I have roads of multi line style in the same drawing. When I completed the drawing I noticed there were missing intersections and I wanted all the roads to look something like the drawing shown below.
Please look into the word file thats how I wanted to do intersection in my drawing. Is it possible to do this action in one command or tool.
This is how my drawing looks like. This is how I want the drawing to be.
I need a style for intersection of alignments that automatically includes the abbreviations for Point On Tangent (POT), Point On Curve (POC), etc. I can create a style with the basic information of Station, Alignment Name, but adding the POT, POST, etc. in front of all alignment’s stationing and name doesn't seem available still in Civil 3D 2011.
View 9 Replies View RelatedAny Lisp to find the difference in z value at intersection points in 3d polyline and polyline,
View 9 Replies View RelatedWe need to be able to use intersection with radius... In doing, it just snaps to the center not intersection.
View 9 Replies View RelatedWhenever I try to trim two intersection arcs who have the same bending direction and similar radius, casue it is extremely hard to click on the parts that need to be trimmed off. See attached pic for reference.
View 2 Replies View RelatedWhen I place a centerline (or include a workplane from the ipt) is there ANY way to dimension to the intersection of this centerline and the edge of an object?
Like in this image above, I would like a horizontal dim between the vertical centerline and the intersection of the centerline and the edge of the part.I know that I can create a sketch on the view and project geometry/draw geometry... but that is such a pita.
I find intersection of two curves with interop
Dim Zinters As Object = DuvarObj.IntersectWith(MainObj, AcExtendOption.acExtendNone)
then pass the intersection points pt1 and pt2 to managed code to get length of the curve between two intersection points , but I realized that sometimes decimal numbers maybe 10th after comma is different than the curve's start or end points. And so the code below throws error, since point pt1 or pt2 is not exactly on the curve, but they are the intersection points excatly.
What can I do?
Dim dist1 As Double = ent.GetDistanceAtParameter(ent.GetParameterAtPoint(pt1))Dim dist2 As Double = ent.GetDistanceAtParameter(ent.GetParameterAtPoint(pt2))
Windows 7 (x64)
AutoCAD 2012 (x64)
I m trying to create an intersection between two roads. See the attached jpeg. When i open the corridor properties i receive an error message which i don't understand. It seems like civil 3d has problem with the order of the regions. Also the corridor sections intersects in the area that i have place a remark "problem". I m trying to correct it manual but when i rebuilt intersection then it overlaps my manual correction
View 3 Replies View RelatedForm Autocad 2000 to 2012, there is always with this problem. It happens sometimes in object snap, it does not work to snap a intersection point (two crossed lines) when drawing a line or arc or others. For sure, these two lines are in the same plan and can be filleted or chamfered. So I turned on the Apparent intersection, it works with apparent intersection point, I am not sure if this apparent intersection will cause other problem. I am working on pure 2-D drawing, do not want to get any 3D objects inside the drawing.
View 3 Replies View RelatedI'm trying to split a polyline that have some intersection points at its intersection points. So, if a polyline have two self intersection point, then it will become three different polyline. I attached an example of a polyline that I want to split.
View 2 Replies View RelatedI'm trying to split a polyline that have some intersection points at its intersection points. So, if a polyline have two self intersection point, then it will become three different polyline. I attach the example of a polyline that I want to split. I wonder, does the get split curve method ?
View 3 Replies View RelatedHaving problems dimensioning to an apparent intersection in an IDW?
Once I hover over both lines to show the intersect and both line do intersect but it should turn green, it's not, it just keeps yellow.
It is placing the dim in the right place but it's also not drawing in the intersect lines.
It was working last month as I have a drawing to prove it.This is on a few machines.
Also moving dimension is a problem. Sometimes they will not reattach after moving one end.
AIP2011 sp2
issue with my Corridor. It involves the intersection of a main road alignment and a secondary road. Thing is my main road has a 6' shoulder whereas my secondary road doesn't have a shoulder at all. I used the Intersection Wizard to create the Intersection, but the two templates don't align. Without the shoulder the ditches don't line up. I tried drawing a polyline between the two ditches and targeting it and that worked, but then realized that going from 6' shoulder to no shoulder wasn't working either so when I tried to target a polyline from the 6' shoulder to the edge of pavement all kind of stuff happened that didn't make sense to me.
Windows 7 Prof w/ SP1, 64bit, Xeon 3Ghz, 16GB
Civil 3D 2013