I have 2 viewports which have 2 different visual styles (realistic with sketchy). I need to overlay the viewports with sketchy on top and be able to to see the realistic viewport below. Is there anyway I can make the sketchy viewport transparent so that it does not mask out what's below?
View 3 RepliesI have just installed 2012 and have drawn a 3d model. In paperspace i have a couple of viewports , all nicely set out at 1:5 scale. then i click in another viewport and bam, all the other viewports change scale (zoom out) and orientation. is there some system variable that i have overlooked?
View 9 Replies View RelatedI have a lot of sheet DWGs with a single layout in each. The layouts have several viewports into model space.
Is there a way to export out the layout tab where the viewport contents have been converted and placed into the layout space?
Ideally, I'm hoping to basically convert the viewport heavy paperspace into a dumb model space layout.
The code I'm using is supposed to go through all of the layouts and freeze the specified layer in the single viewport that is defined on that layout. It works for some viewports, but not for others. A "List" of the objects show the viewports are the same. I have a LiSP routine that gets me more info about selected objects. The first is a viewport that does not freeze the specified layer, the second does freeze the layer. Here is the code I'm using:
Public Sub FreezeNewLayerInVPs(ByVal pageNumber) Dim doc As Document = Application.DocumentManager.MdiActiveDocumentDim db As Database = doc.Database Dim layerToFreeze As String = "DETAIL_" & pageNumber Using tr As Transaction = db.TransactionManager. Start Transaction( )Dim layTable As LayerTable = DirectCast(tr.GetObject(db.LayerTableId, OpenMode.ForRead),
[code]...
I've created a shared sketch and have used it with various features. Sometime those features are suppressed. The model works fine but the shared sketch generates a sketch doctor error because the feature that created it has been suppressed. Is there anyway to make the sketch suppressed so it doesn't trigger a sketch doctor error? Inventor 2013
View 2 Replies View RelatedHow do I duplicate the 2D line work from a part level sketch into a drawing level (overlay) sketch?
I started a simple 2D piping system diagram sketch by opening a new part file and using a sketch to stick draw the system schematic including some annotations. Then I opened a new drawing file and made a base view of the part file to bring a view of the original sketch into the drawing.
I realize now that it would have been much easier to have created the schematic directly in a 2D sketch at the drawing level, which would have made editing the annotations much easier at the drawing level, and there is really no need for the part file to exist. I have no intention of creating a 3D model or "real" part in the .ipt file, was just using it as a jumping off point to sketch.
I was thinking that I could correct my error in judgment by just copying the sketch and pasting it into a new sketch on the drawing, but it doesn't want to work that way. I have tried copying both the whole sketch at the browser level, and the entire sketch contents (all of the lines and annotations) from the opened part sketch, but when I attempt to paste either of those into the drawing, paste does not seem to be an option. I'd rather not have to draw the whole thing again, as in typical fashion, my once simple sketch has grown in proportion and complexity from its simple beginning.
I was trying to query some sketch points data from a profile Path using code as below. However the program stopped without telling the reason.
Code below:
i = 0;
foreach (ProfileEntity oSourceProfileEntity in oProfilePath) { switch (oProfilePath[i].SketchEntity.Type) { case ObjectTypeEnum.kSketchArcObject: { SketchArc srcSkArc = default(SketchArc); srcSkArc = (SketchArc) oSourceProfileEntity.SketchEntity; // error points[i] = srcSkArc.StartSketchPoint.Geometry; break; } default: { SketchLine srcSkLine = default(SketchLine); srcSkLine =(SketchLine) oProfilePath[i].SketchEntity; // error points[i] = srcSkLine.StartSketchPoint.Geometry; break; } } i++; }
First we imported an ".igs" file to inventor, which produced "wires". Then by promoting the wires it produced a 3-d sketch.
The model is in one plane and 2-D, and we are trying to use Ansys 2-D analysis, but in-order to do so it needs to be in a 2-D sketch.
The model is too large to be redrawn on a 2-D plane, how to convert it to a 2-D sketch
want to change sketch 2013 into the sketch of 2010
View 1 Replies View RelatedWhen I edit certain sketched some other sketches disappear. see attached.
This is causing modelling to slow down as I can not project lines from the sketch that has disappeared.
After I create a adaptive part from projected sketch. How to modify the sketch? Please see the part attached.
View 6 Replies View Relatedwhat is the difference between a sketch and a planar sketch?
View 2 Replies View RelatedI'm having trouble with constaints, I'd like to constrain my sketch to a point in another sketch on a different plane. Is this posible in Inventor? If so how? If Inventor works differently how would you get a points in one sketch to be linked to points another?
View 2 Replies View RelatedI work in Sketch-Up a lot creating urban streetscapes and such as I am the graphics person at a community planning consulting firm. Sketch-Up is great for quickly drawing and creating 3D models of screens; however, it is not good for producing a great looking final image to show to a client. What I want to do is export a 2D graphic from Sketch-Up and make it look like it was hand drawn. I am semi-proficient in Photoshop, meaning I can follow a tutorial and be able to tweak and apply what I learned to fit my needs but I can't seem to find something that gives me what exactly what I'm looking for. I've uploaded an image that represents the style I am looking for. This one was done by hand on tracing paper. I can't draw by hand to save my life so I want to create the model in Sketch-Up, export the screen as a JPEG, load into Photoshop and process to make it look like it was done by hand.
View 3 Replies View RelatedUsing '09LT and was wondering if it's possible to have different line type scales in different viewports on the same layout tab?
View 1 Replies View RelatedI have some aligned dimensions in model space - they look ok, text is oriented according to WCS. Also I have some viewports with UCS (I used commands UCS, PLAN) where dimensions look wrong, text is not oriented correctly. Is it possible to "update" dimension in viewport to orient text as in model space?
Programmatically created dims in viewports oriented as in model space, not considering current UCS.
What's everyone's take on locking down viewports?
I always do. It irritates me to no end when i'm moving about in a layout and accidently click into model space and screw up a viewport that is not locked down.
In one viewport i have a contour drawn as a dashed line. to show the item is hidden.In Another viewport i freeze all layers 'above' this item leaving only the item in the dashed line. is is possible, without copying the line to have the line come through in the later viewport as a continuous line, but remain in the first viewport as dashed?
View 1 Replies View RelatedI have to draw a few houses in a street and make a viewport for each house on its own.
Now when i make a viewport of 1 house, i only want the details of that one house and only see the borders of the neighbours houses.
Ofcourse the details and the borders of the houses are on different layers.
I was thinking to make a viewport with only borders as a background and place a smaller viewport with the details on top of it.
So if i "pan" in the small viewport to go to the neighbours house is it possible that the background also "pans" automatically to the same place?
I am operating Autodesk Architecture 2010, trying to get my diminsion to display in a Layout Viewport. All layers are turned off in VP column in layers except my structure and dimensions. Structure is in viewport but not dimensions.
View 3 Replies View RelatedWhenever I've done some drawings, in 1:1 and I want to get it from the viewport and out of the software the scales won't fit. For instance I'm right now having a part of a drawing being 20cm in 1:1, but whenever I set the viewport scale to 1:20 it makes this 20cm long element 15 cm'ish long.
All units are set to millimeter.
Is there a way to make one viewport supersede another so that say parts of the first viewport dont cross over into the second (not enough room). I have one intial viewport. Then four other viewports which are scaled in portions of the inital. I want the scaled in viewports to supercede images from the initial so that there are not parts of the intial intersecting into the "zoomed" in viewport pictures.
View 9 Replies View RelatedI would like to overlap the viewports one to another like using Draworder command with raster image. see my attachment to get what I mean.
View 4 Replies View RelatedIs there a way to pan/move an existing Paperspace Viewport to a defined coordinate? For example you can rotate a Paperspace Viewport with the UCS and Plan view commands
To rotate a view by changing the UCS
Double-click within the viewport whose objects you want to rotate. Make sure that the current UCS is parallel to the plane of rotation (the UCS icon should look normal). If the UCS is not parallel to the plane of rotation, click Tools menu New UCS View.If the UCS is not parallel to the plane of rotation, at the Command prompt, enter ucs. Click Tools menu New UCS Z.At the Command prompt, enter ucs. To rotate the view 90 degrees clockwise, enter 90. To rotate the view 90 degrees counter-clockwise, enter -90. Click View menu 3D Views Plan View Current UCS.At the Command prompt, enter plan. The entire view rotates within the viewport. You may need to specify the scale of the viewport again.
I am copying layout views with a tilteblock and viewport. Going to the new view and having to pan orthagonally down 50 units. I tried setting up named ucs for the 2 locations but that didn't move the viewport as I would thought.
How can I over lay one drawing onto another as simple as poss.
View 1 Replies View RelatedI used pdf attach to insert a pdf into the drawing. I have a plan drawing with viewports that references the drawing file. I tried to turn off the layer in one viewport while leaving the layer turned on in another viewport but i could not get it to plot correctly. It's off in my drawing but when i go to plot its on in all viewports. What is the reason that this happens? my plan file is too large i may have to post it seppartly
View 7 Replies View RelatedWhen I cut and paste a viewport from one layout to the other the layers that were frozen in that viewport become thawed. Is there any way of copying the viewport over so that those layers that are frozen in that viewport only remain that way ?
View 8 Replies View Relatedwhen it comes to viewports in paperspace in 2013, due to the nature of my work i have several layout drawings all drawn on top of each other and all with ther own txt and dims etc, which again is all on top of each other making it impossible to work in model space, for this reason i work in paperspace within a viewport but now i have upgraded to 2013 while i am in mid command e.g. dimension and zoom into first point then zoom back out and in again to second point, by this time i have been kicked out of the viewport and just in paperspace so cant complete the command, doesnt always happen?
View 9 Replies View RelatedI have some aligned dimensions in model space - they look ok, text is oriented according to WCS. Also I have some viewports with UCS (I used commands UCS, PLAN) where dimensions look wrong, text is not oriented correctly. Is it possible to "update" dimension in viewport to orient text as in model space?
Programmatically created dims in viewports oriented as in model space, not considering current UCS.
I used the layout wizard to configure 2 vertical viewports as instructed in the manual. Next I try to paste an object in one viewport at a scale of 1:20, engineering imperial. The object appears in both viewports in model space. I only want the object in one viewport and I cannot erase the object in the other viewport, since they both dissappear. I also cannot draw a line in one viewport without it appearing in the second viewport. If I switch one viewport to current paper space the line can be drawn but I want each viewport to be at a different scale. Is there some way around this? Is my AutoCAD LT program capable of doing this?
View 9 Replies View RelatedI'm currently working on a drawing that has three different viewports with the scales of 1-250, 1-500 & 1-1000. I would like the text I've created in model space, to display at the same size (2.2mm) in all of these different viewports.
I'm using metric, and 1 unit in AutoCAD = 1m. I know that most people use 1 unit in AutoCAD = 1mm, but in my profession (working on large architectural site surveys) 1 unit in AutoCAD = 1m is the norm.
So the viewports are set at 4:1 for 1-250, 2:1 for 1-500 & 1:1 for 1-1000. I've set the text to be annotative, and to have the same scales. The annotation scale is currently set at 2:1 in model space.
Firstly, I don't really understand why and when I'd need to change the annotation scale in model space? I've adjusted it in the past to make sure that lintypes display the same in both model space and within viewports. Is it the same thing?
Secondly, by doing the above, all that I've achieved is that currently in model space the text is 1.1m high (which is what I want, and how I'd originally created it). In the viewports it is now coming out at 8.8mm for 1-250 (4 x too big), 4.4mm for 1-500 (2 x too big), and 2.2mm for 1-1000 (the correct size).
When I activate the viewports, it tells me that "annotation scale is not equal to viewport scale" in all but the 1-1000 viewport.
How can I make the text 2.2mm in all of the viewports?