How to do this so it doesn't ask for a block definition!
I have an extruded region of 50 x 50 (SHS) that I want to put a 45 degree mitre on, so I orientate my UCS to ortho, I have a reference line drawn over the job for my 45 degree/3 points to pick...
I Select 'both' to keep and it asks me for a block definition?
I'm trying to change block the definition of an block reference.
I did something like this:
blockreference.BlockTableRecord = newBlock.ObjectId;
In most cases this works well. However I found a case that it not work as well. When I try to change the definition from a new block that I have created in my test DWG, it disappears from the model.
I have a question regarding parameters in a block definition, or more specifically how to constrain parameters. I have attached a PDF showing exactly what I am working on. Basically I have an arm for a monitor which I need to add some parameters to. I need to be able to have a point that I can grab where the "primary grab" is located, and when I grab that I need the arm to pivot at the indicated pivot point, but be restrained by the first arm that is constrained to the circle. Is this possible to do in AutoCAD?
View 0 Replies View RelatedIs there any way not to show a particular block in block definition table ? My program bring a block into drawing thru a user form . And set some Xdata to it after insertion . If user bring the block manually into drawing then how would we know which one has xdata and which one doesn't. I came to this solution to hide it in block definition list.
View 4 Replies View Relatedhow I can get VBA to insert/redefine a block reference from another file into a block (of the same name) that already exists in the target drawing?
I've tried using the insertblock method but it produces a 'filer error' - As a bonus point, it'd would also be good to be able to retrieve the contents of the blocks collection in the source drawing in some clever way other than opening it (a bit like browsing using the design centre) ?
ACad, MEP, 3DS Max
Windows 7x64
X5482 @3.2Ghz 8Gb Ram
Quadro FX1700
I need to remove lines from a block definition and replace them with LWpolyLines. I see there is a way to Append entities to a BlockTAbleRecord but I don't see a way of removing an entity.
View 2 Replies View RelatedI'm trying to develop one tool with that objective:
View 9 Replies View RelatedWhen I try to copy/paste I get this massage, "Duplicate definition of block GENAXEH ignored".
View 4 Replies View RelatedI am wondering what Block Authoring actions i can use to move my Attribute Definitions up and down in a Dynamic Block. I understand duplication the definitions can get really ugly.
So i want to be able to have a second visibility tab in my block the nwhen i select it my Attribute Definitons insertion point moves to another co-ordinate with in the block.
Autocad 2012 full version
I have a large symbols library and need to have 1 block name and count but be able to show them in different colours depending on where they are placed. (eg pink block at low level and green at high level, but when counted by block name it counts 2 not 1 green 1 pink).
I need to view a block definition from an out-of-process app (written in C#).
The app uses True View Acctrl to as a viewer.
It works fine for whole dwgs, but when it comes to viewing just one block definition' the best I could come up with was:
<pseudo code>
start a new Autocad instance;
open the dwg in Autocad;
perform a Wblock of the block definition to some temporary file;
open and view the file in the Acctrl;
erase the temporary file;
</pseudo code>
It seems clumsy though.
Is there any API for doing this? (preferably not higher than Acad 2008)
I have a small vba sub wich changes the color and layer of all entities inside a block. It seems to work pretty well for the majority of blocks, but then if I try that on a dynamic block, the definition is correctly altered, but the references aren't updated...
I know for a fact that the definition has been correctly modified because if I type bedit, I can see the definition is modified. Then, in the block editor, if I save the block, the references are correctly updated.
How to force references to update after I made the modifications inside the definition ?
I searched for methods within the VBA Reference and I tried blockRef.Update but it doesn't seem to have any effect.
How to mimic Block Definition Save As function.
So far what I have found in this forum and TheSwamp the best way is to use DeepClone of BlockTableRecord but the objects in original BlockTableRecord need to be DeepCloneObjectes into new block. Otherwise new block will have all objects with ObjectId from old BlockTabkeRecord.
What order of operations do you use to include multiple attributes in a WBlock definition? I can't figure out to include all of attributes and have them in a specific order.
View 2 Replies View RelatedI am trying to assign a plotstyle to attribute while creating a block. First I create the block, then I insert the Blockref, in that process I have errors assigining a plotstyle to the attribute. (I have also tried to assign the plotstyle while creating the block and attribute with poor results.)
Here is my attempt to do this:
For Each objId As ObjectId In blkTblR
Dim obj As DBObject = objId.GetObject(OpenMode.ForRead)
If TypeOf obj Is AttributeDefinition Then
[Code].....
I'm having trouble getting my attribute definitions to work with my blocks.
I'm trying to create a tag that can flip around (dynamic) and have a tag number easily entered (attribute).
I notice that I could only get the attribute definition to work during a drawing insertion is when I wblocked out my block and inserted that drawing file. I was not able to insert the drawing file that had the block in it.
I can't seem to make a dynamic block drawing file, and then insert that dynamic block drawing file if I want the attribute to work..
Is there a short cout to getting to the source drawing file containing block data? Drilling down into the Program Files folder is tedious in the heat of getting drawings done.
View 2 Replies View RelatedHow i can calculate bounding box of a BLOCK definition ? I know after inserting a block, we can get bounding box of a block reference.
But how can i get bounding box before insert? Assuming that i never going to scale or rotate it.
I've got a drawing from a client, I've created a layer and I'm adding MTEXT to the drawing. Rather than creating a new MTEXT every time, I copy and paste the previous one and edit.
It works for a bit then out of the blue, it will give me that error after there's about 16 copy/pastes.
_pasteclip Duplicate definition of block _ArchTick ignored.
I don't understand what _ArchTick is or how I can get around this error?
I want to determine the size of a (non-dynamic non-annotative) block definition (BlockTableRecord). Does a block have a boundry or limits? For example, if the block would contain a simple square, the size of the block would be equal to the size of the square.
View 4 Replies View RelatedCan't you access the block definition via ObjectDBX.
(without the dwg file being open)
I am parsing through the blocks to find all the xrefs.
When I get to an XRef... I don't seem to find a way to check if it's an XRef.
Presently if I insert a block into my drawing - and a block with the same name exists - the newly inserted block takes on the definition which exists in the receiving drawing . How do I reverse this i.e. I want to be able to overwrite the existing block definition by inserting the new wblock version.
View 9 Replies View RelatedI have several existing block definitions and need to change the insertion point. Also, when creating a new block in the Block Editor, how do I define the insertion point?
View 9 Replies View Related2014. In help, it says to "Click Insert tab-Block Definition panel-Manage Attributes" In my display, when clicking the Insert tab, I only have a "Block" panel, not a "Block Definition" panel. Trying to get to the Sync command.
View 2 Replies View Relatedhow to create a new Table Style definition.
I don't want to create a table on a sheet, I want to define a new style and then assign the style to the existing table.
I have no problem assigning the style once it is defined in the drawing to the existing table.
Dim oTableStyle As Inventor.TableStyle oTableStyle = oDrawingDoc.StylesManager.TableStyles("BOM") Dim oTable As Inventor.CustomTable oTable = oSheet.CustomTables.Item(1) oTable.Style = oTableStyle
There doesn't seem to be a TableStyles collection with an add or create event. I stumbled upon the "TableFormat" object but that seems to only override an existing style.
looked at the "StylesManager" but again I am not finding a create method.
I am trying to create a property definition that will display the elevation of a space object. I looked through the automatic properties and did not find anything that looked like the elevation.
I have tried the following but was unable to achieve any success.
RESULT="--"
On Error Resume Next
Set AcadApp = GetObject(, "AutoCAD.Application")
Set Obj = AcadApp.Activedocument.Objectidtoobject("[ObjectID]")
RESULT = Obj.elevation
That formula does work if i swap elevation with say height, width,length or any of the properties found in the automatic property list that are a single word. I know the elevation is there I just don't know how to access it.
How can I copy a linetype definition from a drawing to the linetype definition file?
View 7 Replies View RelatedIs there a way to create a block with attributtes that automatically complete x, y, z, lat, long for the insertion point of the block?
I am trying to complete text in paperspace that will automatically fill in the lat long of a point in model space without using a table. I have tried field insertion with reference to a cogo point, but it doesn't give options for position on a cogo point. If I pick a block with attributes, it will let me pick any attributes, and x,y position for the block.
Cogo points show all the information I need to propagate in the properties....but how do I get that to translate into the text using fields or some other method?
Dell Precision T3600 - Windows 7 64-bit
NVIDIA Quadro 600
Intel(R) Xenon(R) CPU E5-1607 0 @ 3.00GHz 3.00GHz
8 GB ram - Two 1TB raid
Is it possible to create a block to insert on our title block that will populate itself with a list of drawings and names?
I know this is possible through the use of LISP and the Sheet Set Manager, but could this be done through a combination of attributes and fields (we want the same functionality in LT).
I made a write block from one drawing so that i could use it in another drawing. Now that i have inserted it into a different drawing i cannot explode it. I did not see the option to allow exploding when i created it.
I tried to create a regular block (not a write block) but then when i opened a new drawing and clicked "insert" "block" it was not in the list of available blocks?
Is there a way to create a thumbnail for a block that looks like the block when in a drawing rather than exploded when written to a file? All of the hidden attributes are currently being shown in the thumbnail using Wblock.I'm using AutoCAD 2011 to create blocks and thumbnails for a program called WireCAD.
View 9 Replies View Related