AutoCad 2D :: Dimension Font Resizing To Last Edited Dim Style
Jun 29, 2012
I've had some problems with dimension fonts resizing to the last edited dim style. I have attached an example drawing. There are 2 styles here 'Gdims' and 'Stand Dims' The Gdims need to be small font and the Stand dims need to be larger. I have set the size of each style, but if I stretch the larger dimensions they auto resize the font to the set size of my last amended dim style (in this case GDims). You'll see in the attachment that I have resized the 2 blocks and the dimension font has become smaller than the rest.
Not all of my drawing behave in the same way so I'm assuming there's a setting I need to change, but as yet I haven't found it.
View 0 Replies
ADVERTISEMENT
Nov 8, 2012
The attached drawing has two bits of text that are identical except from the font style.
They look different.
What is the difference between 'Regular' and no font style.
How do I acheive the 'blank' font style instead of Regular?
View 6 Replies
View Related
May 25, 2011
I'm working on a drawing that was converted into cad and it seems like every dimension has its own style. When I copy use the move comand or try to change the dimension the text changes from being above the dimension line to centered and the text gets closer together horizontally. When I compare a copied dimension to the original it has all the same properties including the text pos vert still being above text. The actual dimension style hasn't changed at all but what is showing up on screen is different.
Here a image showing three dimensions with the same properties, the top 2'-10" is what it should look like, the bottom is what it looks like when I copied it and the 1'-2" is when I make a new dimension.
View 5 Replies
View Related
May 7, 2012
I am working with a template, that doesn't allow me to change the dimension style. In the project the Use Style Library is set to Read/Write. I have created my dimension style, at this point just a copy of the ANSI standard with a text size difference. I went to my template and set that syle as my default, and saved it. Now the fact that it doesn't automatically update the drawing I had alreadycreated is a nuisance, however if I creat a new drawing, the style has reverted to a different standard, that is not even the ANSI default. If I right click a dimension and change the dimstyle to what I saved it does update, but if I try to change the style again it defaults to a random dimstyle, AND changes the style even if I hit cancel. So... the question is how to make the changes stick?
View 1 Replies
View Related
Nov 5, 2009
There is a font and table style called "Legend" that is automatically generating and can not be purged.
I have looked through all the start up files, all the lisp files and can't find anything that would be creating them!
They appear in any file I open, new or old and even if I open a template file.
I have attached a file that should be empty but you will (or should) see both a font and table style called "Legend".
(FYI I am running AutoCAD Civil 3D 2010 as AutoCAD 2010)
View 5 Replies
View Related
Feb 1, 2012
Is there any way to lock a text style so that the associated font style can not be changed?
View 2 Replies
View Related
Apr 11, 2012
How can I apply edited paragraph style to all at once.
I mean I have created new paragraph style with 10 pt Arial font and applied to different paragraph. And now I have edited the same paragraph style with 16 pt. Arial font, now how it will applied at once to all old style that I have used.
View 8 Replies
View Related
Mar 9, 2012
I have approximately 800 library files that I would like to change the Dimension Style on. Is there a way or some program out there that would allow me to change the Dimension Style on all 800 drawings at once or do I need to open each one up change and save?
View 3 Replies
View Related
Sep 16, 2005
Each time I open a drawing, on my arrow dimension I get a style override which is always scaled at 96. Even if I delete the style override, when I close the drawing and open it again, it's back. It's always on the "arrow" dimension, never any other dimensions. I don't know why it's been doing this, it just started one day out of nowhere. Is there a way I can get rid of it? I'm using AutoCAD 2005.
View 9 Replies
View Related
Oct 29, 2013
I am having a problem with my dimension style on Acad mech 13. In my template I have set my modified dimension style as current and saved. I have set my template dwt. file to open in Qnew, but when I start a new drawing from Qnew, dimstyle reverts back to default style.
View 2 Replies
View Related
Aug 14, 2013
I am trying to solve a problem which all 3 of us in the Drawing office are battling with. The standard dimstyle we use is called "MP2013" , we are finding that somehow ACAD is adding something resembling a "$" sign at the end of the dimstyle and the properties are out of whack. We cant work out what brings it on but its been happening for a week or 2 now.
View 3 Replies
View Related
Nov 23, 2012
Is it possible to define a dimension style that will look something like in the picture attached?
Value is 163cm and 5 mm.
View 9 Replies
View Related
Jan 8, 2012
How I need to modify dimension style if I want to get like in my given picture?
View 9 Replies
View Related
Mar 29, 2013
I created a new dimension style named Feet-mm. How can I get this new dimension style to be by default?
Instead of having to select the new style each time .
View 2 Replies
View Related
Nov 28, 2013
are there any possibilitys that i can change my dimension style in a way that dimensions with less than a meter are shown as centimeter, for example 0,50 (m) are shown as 50 (cm).
View 6 Replies
View Related
May 1, 2013
I'm using different dimension styles for different scales on my drawing, however, if i change one dimension style text to a certain size, all of the others change too, is there something i'm doing wrong? I need every dimension style to be its own text size, but i'm having to manually change them every time.
View 4 Replies
View Related
Aug 2, 2012
I have a group of dimension objects gather up by a selection set (objSS). I can screen each one one of these dimension by the lines
Dim objDimStyle As AcadDimStyle
For Each objDimension In objSS
'
'
Next
How is possible to assign the property Dim Style to each one of my objDimension to an Style that I have already created? I can not find this property available for my objDimension.
View 2 Replies
View Related
Jun 28, 2013
why every time I use the DAL shortcut, I get a dimension style override appear? Yet it doesn't do it when i use DIMALI or the DIMALIGNED button?
I've searched extensively for a solution to this yet I can't find a solution that works. The >Drawing Setup>Scale tab doesn't seem to exist in this version, and I've tried setting all the CreateDimOverride values in the registry to 0, but even that isn't working.
AutoCAD 2012
View 2 Replies
View Related
Feb 25, 2011
I have AutoCAD 2011 now and I am not sure where the Dimention style edit (to show in all dimention lines I am using) is...what I have to do now is to change each line EVERY time I dimention any thing.
the other thing is how to scale the drawign in viewport. In older versions it shows easily. Where is it in this one!?
View 4 Replies
View Related
Oct 31, 2012
Is there any way when I am dimensioning something to make it read feet and decimals of a foot for instance.
Instead of it reading 5’-6 9/16” it would read 5.546875’?
I tried a few different things on the dimension style and I can get it to read out in decimal inches (it would be 66.5625” with the example givin) but not feet.
The reason I need it is for a program that we run where we must enter the measurement in decimal feet
View 5 Replies
View Related
May 18, 2012
I created a new dimension style in a drawing. But i can't find this new create dimension style in othes drawing. I am wondering how can i create my own dimension style and could be use in every drawing as my own style?
View 1 Replies
View Related
Jan 4, 2013
I am trying to edit my drawing template dimension style to always do a diameter (if it is a circle). Right now it defaults to radius and I manually right click and change it. I found all sorts of styles for how it displays the radius and diameter, but didn't find where to set the default.
View 7 Replies
View Related
Nov 14, 2012
My linear dimension command is not working and I noticed I have no dimensions showing in my dims style manager. When I go to set up...I have no dimensions showing in the preview.
View 1 Replies
View Related
Oct 24, 2013
I have a huge problem with my Autocad 2013 for MAC, everything is running nice and steady except for one detail, everytime I open the dimension style format to make a new dimension style, autocad freezes (only autocad, rest of my mac keeps working normally) and I cant work anymore, I have to force quit the program and re-open it, but the dimension style I created gets lost. is there something i can do? i already tried by uninstalling it and reinstalling it and this problem doesnt go.
also im new in this discussion groups so if this topic doesnt belongs here let me know before deleting it so i can put it where it belongs
View 8 Replies
View Related
Sep 23, 2013
What is the ideal dimension style setting for metric say 1:100 scale. See my setting on the attachment.
View 8 Replies
View Related
Jul 5, 2012
When I dimension an arc to find the radius, the dimesnions appears as a line going from teh center of the arc to the edge of the arc with the dimension in the middle. I don't want this. I want a leader pointing to the R text and that's it.
I've attached a photo of both scenarios- one dimension is the style I don't want, and one is basically the style I want (I'd like it to be more of an elbowed leader line), but it only appears when I use AutoCAD's ISO25 dimension style.
View 2 Replies
View Related
May 10, 2013
I have a problem I can't figure out. I have a Pipe Style defined that is set to draw my pipes as double lines in plan using the inside pipe diameter. The problem is that there are a few sizes such as 21" & 30" that will not draw/display the double lines to the correct inside pipe dimension.
It will draw a 27" pipe as 10" & a 30" pipe as 12", but all other pipe sizes are drawn crorectly. I have looked at these in part builder & have also rebuilt my parts list.
What would cause certain pipe diameter not be drawn at the correct size it the style is defined correctly?
civil 3d 2012
View 7 Replies
View Related
Dec 19, 2011
Is there a way that I can make the length of the dropdown menu (shown below) for the Dimension Styles longer? It is difficult to select the correct dimstyle.
View 5 Replies
View Related
Aug 8, 2013
I have attached a simple dwg file with two dimension styles in it. The current style ("standard") is also the default, so it obviously cannot be purged. The other one ("PULL_X"), which is clearly not current, is also not used by anything in the drawing (as far as I can tell), yet it won't purge.why it cannot be purged?
View 9 Replies
View Related
Dec 10, 2012
I'm using Inventor 2013 and I'm trying to create a new dimension style that shows a box or parenthesis rather than a dimension. The purpose is so the workers in the field can measure a part and fill in the dimension.
So far the best I can do is make a dimension style that is white so that it comes out as a space. The other option was to manually override the dimension, but I don't want to go into every drawing and change every dimension.
What I would truly like is if the dimension would automatically come out looking like this [ ]
View 1 Replies
View Related
Oct 14, 2009
I'm chasing the syntax on what i hope is a very simple procedure.
We have a project for re-design and manufacture here (Australia) of a machine that has been designed and detailed in one of our US offices. For this reason, we will be wanting all dimensions in mm etc, rather than inch.
My intention is to open the idw(s), update the styles library (done, i think...), change the active standard to "AS Metric" (got the code sorted for that too), and then change all dimensions to AS Metric.
So far i have each of these 3 processes in a different sub, called from a master. But my problem is in changing the style. I could change a dimension's style to match that of another existing style:
Set oGeneralDimensions = oSheet.DrawingDimensions.GeneralDimensions.Item(1)
but I am having trouble setting is to the active style.
My module:
Sub ChangeStyle()
Dim oIDWDoc As DrawingDocument
Set oIDWDoc = ThisApplication.ActiveDocument
Dim oSheet As Sheet
Dim oDim As DrawingDimension
Dim oDimStyle As DrawingStandardStyle
Dim oGeneralDimensions As GeneralDimension
[Code]....
View 9 Replies
View Related
