How to write some code which could create variable names like var1, var2, var3, etc. I need to do this because I have a large number to create and the actual number is variable and unknown.
Instead of manually writing a large number of line like
(setq var1 value1)
(setq var2 value2) etc
I used to be able to put 1 line in a loop to create and assign a large number of variables. I remember that it involved the use of the set (not setq) and read functions.
What I was thinking of was in a loop some times I need multiple sets of similar variables but am not sure how many sets I am going to need. I would like to be able to increment the variable names each time the loop runs.
I am trying to change the current TARGET variable to 0,0,0. If the variable is not changed is causes problems with plotting. I have the VBA that will change the TARGET variable. VBA works no problems. I am wanting to replicate in LISP because I do not want to have to convert to .NET and do not want to make sure the user has the VBA loded on thier system. Here is what have so far.
;;;Get active viewport (setq avp (vla-get-ActiveViewport (vla-get-ActiveDocument (vlax-get-acad-object)))) ;;;Get current TARGET variable (setq CTarget(vla-get-Target avp))
Here is the problem. Is changing or putting the vaiable.I have tried
There is a command in autocad that will get a Bounded Volume from a closed polyline and a volume surface (command "AeccReportSurfBoundedVolume"). It reports the results to the screen. How to get the "Net Volume" results in to a variable using Lisp?
Maybe a lisp routine that gets information from the text screen. That would not be ideal but I could work with that.
I've created a list and want to subtract all the values within it from another variable, and assign it to a new variable. How do I do it?
Basically, I ask for ground level (assigned to variable G1), and then any number of depths beneath that (assign to list LVLLIST), and I want to return the value of the bottom point. So it's all the values in LVLLIST added together and subtracted from G1. And assign it to a new variable BASE.
A2008. Is there a setvar, setenv, registry entry etc. that can be used to change the scale of Multileaders with annotative off to have the same effect that DIMSCALE has on Q leaders? I want to have a single scale-independent Multileader style and modify it on the fly along with DIMSCALE and LTSCALE. I'd use Qleader but UCS's do odd things to text position and orientation.
and i would want the outcome to be: variable.dwg, rather than filename.dwg. I have tried numerous different ways of doing this with command prompt and cant seem to get anything to stick. Everything that works just creates a file named "filename.dwg", which is not what i want to do.
How do I check, with LISP, if a System Variable is read only? In particular ANNOTATIVEDWG. This one is read/write when there are no annotative objects in a drawing, but read-only if there are.
I would like to create a lisp that does the following:
Update a titleblock attribute with a $variable.
The titleblockname is variable / not static.
The attribute is not variable / Static, DW_SCALE
The titleblock is always places on the same layer, BL$4----
The (custom)-plotscale is stored in the $var "gvpsc".
I've tried to ajust the following lisp code. But I couldn't extract the part I need.
The problem is, the code checks all the layouts and updates all the titlblocks one by one.
Truely a good code.
The only problem is, I don't have multiple layouts and I have a variable titleblock name.
Here is to code i've tried to convert to something I could use.
(defun C:UPD-DPC () (setvar "cmdecho" 0) (setq blkname "DPC-STEMPEL");(getstring " Enter the name of block to update: ")) (setq att1 "DW_DATE");(strcase(getstring " Enter the name of the attribute to change: "))) (setq newatt (strcase(getstring "
I want to use it to plot different views which I will append to the command when it is called from within AutoCAD.This code will, of course, print view one.Currently my worst case is 25 views and, for that situation, I have simply repeated this code 25 times with a different function name an view number for each view. Eventually I would like to make a dialog box that would allow me to select with checkboxes (toggles) the views to print and with a button to print all.
For example, if I wanted to plot view 25, after I had loaded this lisp routine I would enter, on the command line in AutoCAD, the function name ("pp" perhaps?) followed by some variable (in this case 25, but could be any view name. ie. 01, elev, detail) and the view name would be inserted at the appropriate place.
I am using a variable that is being called up from a .csv file for a file name. By default this variable automatically includes a comma due to it being called from a .csv.
How to remove a character ( , ) from a variable? I'm not sure if this is along the right line or not, but i used the READ function to read the variable as a string (i think thats how it works?).
I would like to know how I can compare the value of a variable to a set string of text if the two prove to be equal perform task A if the two prove different perform task B?
I have attached 2 lisp files. datblkx5 makes a block of selection, inserts the block with a 5x distortion, explodes it, and corrects the text for width factor and text height. This one works fine.
I wanted to add the feature of scaling my selection with a user input value. This is the lisp datblkxxx. This one doesn't work. (that is it doesn't correct the text for width factor). I can't figure it out.
Is it possible to change the system variable "TEXTSIZE" with an autolisp routine? I have hundreds of drawings that have varying textsize settingings and I can't get it to let me change it, unless I go into "Style" and manually change the value to "0" before I run the routine, and there are simply too may drawings to do that everytime. So, is there a way to reset the textsize to 0 through Lisp?
I am writing a LISP program to generate development of surfaces. Once the entire drawing is completed, I want that the input data to be displayed on drawing window as text.
I'm looking for a way to find out what all plot styles are set in drawings in a sheet set.
We are transitioning from color based pen settings to style based and would like to be able to export a log that shows the variable PSTYLEMODE for each drawing in a sheet set. I plan on using ScriptPro to run it on the full sheet set.
Civil 3D 2013 Windows 7 64-bit Xeon W3550 3.07 GHz Nvidia Quadro 4000 12.0 GB RAM
We are using a title block and it has an attribute field that links to the file name. Now one of our projects is adding the revision to the CAD file name, but it messes up our drawing sheets.
i.e. It was fine when the CAD file name was 111-A222-ZZ-X-123456.dwg and this would display the complete 111-A222-ZZ-X-123456 in the drawing title.
Now we need to do this, the CAD file name, 111-A222-ZZ-X-123456-001002-A1.dwg and we still need to just show 111-A222-ZZ-X-123456 in the title block, striping away the 001002-A1.
I need to change the value of some tags in a title block on multiple drawings. I tried using Lee Macs attribute changer [URL]. It works fine but not when tags have the same name.
I then looked at this code - [URL]
Idea was to change the tag names then use Lee Macs program. It too fails when there are duplicate tag names. It changes all tags not just the one I want.
In the the title block I have 3 tags with the name "NAME" but only one will have the value I'm looking to change. If I could place an IF statement some where in the above codes (or another code altogether) to instruct that IF the tag name is "NAME" with value "Dennis (BSL)" then change either the tag name or the value to "Daniel"
Im pretty bad at this programming stuff but with so many drawings I need a easier, automated way of doing this.
I have 2000+ drawings that have either the layer state "LMAN_DWF" or "DWF". I want all of them to read "DWF" for scripting purposes. LSIP routine that will go into a drawing and change rename a layerstate if it is named incorreclty, but do nothing if it is named correctly?
Does Layer State "DWF" exist?
If Yes, skip file and move on to next file
If No, does Layer State "LMAN_DWF" exist?
if Yes Rename Layer State to "DWF"
If No, skip file and move to next file.
Or a LSIP routine that can simply dump a list of all drawings in a directory that contain "LMAN_DWF" as a layer state. I could then use that list to do a simple script to change the layer state names on those specific files.
I have a parent directory with x-amount of folders contained inside. I say X-amount because I would like to keep adding or deleting folders as time progresses. I want the folders contained within this parent directory do be read into a lisp variable and then be printed to the command prompt till every folder is displayed by name, then the loop may stop.
