I want to know if it's possible to replace a drive by an environment variable in a search path in the profile. For example:
to replace C:Program FilesAutodeskAutoCAD Mechanical 2012Acadm by %LOCAL DRIVE%Program FilesAutodeskAutoCAD Mechanical 2012Acadm.
I was just looking through one of Lee Mac's tutorials and I'm curious about something.
Here's a link to the tutorial I'm talking about.
[URL]
What is the purpose of the asterisks in the following code (marked in RED):
(if (not *ans*) (setq *ans* "Alpha"))
(initget "Alpha Beta Gamma")
(setq *ans*
(cond
(
(getkword
(strcat "
[code]....
I am trying to change the current TARGET variable to 0,0,0. If the variable is not changed is causes problems with plotting. I have the VBA that will change the TARGET variable. VBA works no problems. I am wanting to replicate in LISP because I do not want to have to convert to .NET and do not want to make sure the user has the VBA loded on thier system. Here is what have so far.
;;;Get active viewport
(setq avp (vla-get-ActiveViewport (vla-get-ActiveDocument (vlax-get-acad-object))))
;;;Get current TARGET variable
(setq CTarget(vla-get-Target avp))
Here is the problem. Is changing or putting the vaiable.I have tried
(vla-put-Target avp (vlax-3D-point '(0.0 0.0 0.0)))
and
(vla-put-Target avp (vlax-make-variant (vlax-3D-point '(0.0 0.0 0.0))(vlax-variant-type CTarget)))
They either error out or nil with no change. I have even tried to locate it in the Dictionaries.
There is a command in autocad that will get a Bounded Volume from a closed polyline and a volume surface (command "AeccReportSurfBoundedVolume"). It reports the results to the screen. How to get the "Net Volume" results in to a variable using Lisp?
Maybe a lisp routine that gets information from the text screen. That would not be ideal but I could work with that.
I've created a list and want to subtract all the values within it from another variable, and assign it to a new variable. How do I do it?
Basically, I ask for ground level (assigned to variable G1), and then any number of depths beneath that (assign to list LVLLIST), and I want to return the value of the bottom point. So it's all the values in LVLLIST added together and subtracted from G1. And assign it to a new variable BASE.
For example,
G1 = 650.00
LVLLIST = (1.23 23.26 0.13 50.23)
(setq BASE (- G1 LVLLLIST))
How to write some code which could create variable names like var1, var2, var3, etc. I need to do this because I have a large number to create and the actual number is variable and unknown.
Instead of manually writing a large number of line like
(setq var1 value1)
(setq var2 value2) etc
I used to be able to put 1 line in a loop to create and assign a large number of variables. I remember that it involved the use of the set (not setq) and read functions.
Is there anyway to program variable names?
What I was thinking of was in a loop some times I need multiple sets of similar variables but am not sure how many sets I am going to need. I would like to be able to increment the variable names each time the loop runs.
Somehow, I manage to turn of one variable that display errors on command line.
For example:
(seq a 6)
suppose to return, on command line, something like:
error no function definition: SEQ
A2008. Is there a setvar, setenv, registry entry etc. that can be used to change the scale of Multileaders with annotative off to have the same effect that DIMSCALE has on Q leaders? I want to have a single scale-independent Multileader style and modify it on the fly along with DIMSCALE and LTSCALE. I'd use Qleader but UCS's do odd things to text position and orientation.
View 4 Replies View RelatedI would like to use a string as a variable if this is possible. I've got:
new-pl-lay (as a variable that holds layer name "UGL_PL_NEW")
first-cable (as a string that holds "new-pl-lay")
I'd like set the current layer to "UGL_PL_NEW" by using the first-cable string.
Something like:
(command "_.layer" "m" (read first-cable) "")
I am trying to shorten my code by using the variable as the command name. Is that possible to do?
;; instead of this(cond ((eq USER_INPUT_ANSWER "blk-cdtree-01-06")(C:blk-cdtree-01-06)) ((eq USER_INPUT_ANSWER "blk-cdtree-01-08")(C:blk-cdtree-01-08)) ((eq USER_INPUT_ANSWER "blk-cdtree-01-10")(C:blk-cdtree-01-10)) ((eq USER_INPUT_ANSWER "blk-cdtree-01-12")(C:blk-cdtree-01-12)));; do something like this(C:blk-cdtree-(substr USER_INPUT_ANSWER 11))
how to write a lisp command, or function, that will save my newly created drawing with a file name is that is called up from a variable.
For example:
(setq filename variable)
(command "saveas" "r14" "filename")
and i would want the outcome to be: variable.dwg, rather than filename.dwg. I have tried numerous different ways of doing this with command prompt and cant seem to get anything to stick. Everything that works just creates a file named "filename.dwg", which is not what i want to do.
How do I check, with LISP, if a System Variable is read only? In particular ANNOTATIVEDWG. This one is read/write when there are no annotative objects in a drawing, but read-only if there are.
View 7 Replies View RelatedHow come I can't modify the following registry key to the SAVEFILEPATH variable?
(vl-registry-write "HKEY_CLASSES_ROOT\SOFTWARE\Treadstone\File Sweeper" "NETWORK_LOCATION" SAVEFILEPATH)
I would like to create a lisp that does the following:
Update a titleblock attribute with a $variable.
The titleblockname is variable / not static.
The attribute is not variable / Static, DW_SCALE
The titleblock is always places on the same layer, BL$4----
The (custom)-plotscale is stored in the $var "gvpsc".
I've tried to ajust the following lisp code. But I couldn't extract the part I need.
The problem is, the code checks all the layouts and updates all the titlblocks one by one.
Truely a good code.
The only problem is, I don't have multiple layouts and I have a variable titleblock name.
Here is to code i've tried to convert to something I could use.
(defun C:UPD-DPC () (setvar "cmdecho" 0) (setq blkname "DPC-STEMPEL");(getstring "
Enter the name of block to update: ")) (setq att1 "DW_DATE");(strcase(getstring "
Enter the name of the attribute to change: "))) (setq newatt (strcase(getstring "
[Code] ....
I am looking for some way to store variables. For example in loop I want to
Enter a number
1
Enter hatch pattern
Ansi31
Enter a number
3
Enter hatch pattern
Ansi32
Enter a number
1
Enter hatch pattern <Ansi31>
Enter
Enter a number.... etc.
I want to set the break size in all of my dimstyles but I can't find a system variable for it. know what it is or how else to set it?
View 2 Replies View RelatedI have this small lisp routine:
(defun c:1p nil
(command "_.-plot" "yes" "" "controls 11x17" "Ledger (11 x 17)" "inches" "LANDSCAPE" "NO" "view" "01" "FIT" "CENTER" "YES" "newpap2.ctb" "YES" "As" "NO" "NO" "yes" )
(princ)
)
I want to use it to plot different views which I will append to the command when it is called from within AutoCAD.This code will, of course, print view one.Currently my worst case is 25 views and, for that situation, I have simply repeated this code 25 times with a different function name an view number for each view. Eventually I would like to make a dialog box that would allow me to select with checkboxes (toggles) the views to print and with a button to print all.
For example, if I wanted to plot view 25, after I had loaded this lisp routine I would enter, on the command line in AutoCAD, the function name ("pp" perhaps?) followed by some variable (in this case 25, but could be any view name. ie. 01, elev, detail) and the view name would be inserted at the appropriate place.
I am using a variable that is being called up from a .csv file for a file name. By default this variable automatically includes a comma due to it being called from a .csv.
How to remove a character ( , ) from a variable? I'm not sure if this is along the right line or not, but i used the READ function to read the variable as a string (i think thats how it works?).
I would like to know how I can compare the value of a variable to a set string of text if the two prove to be equal perform task A if the two prove different perform task B?
View 7 Replies View RelatedI write a code to replace strings in one string.for example
str="AutoDesk, AutoCAD, 2013, Electrical, 64Bit"
patt=", "
NewStr=" - "
==> result: "AutoDesk - AutoCAD - 2013 - Electrical - 64Bit"
;;replaces NewStr instead of Patt(s) in Str string(defun ReplaceStr (NewStr Patt Str)(While (> (vl-string-search ptt str) 0)(setq Str (vl-string-subst NewStr patt Str)) );;whilestr) ; usage;(ReplaceStr " - " ", " "AutoDesk, AutoCAD, 2013, Electrical, 64Bit")
==> result= ; error: bad argument type: (or stringp symbolp): nil
I have attached 2 lisp files. datblkx5 makes a block of selection, inserts the block with a 5x distortion, explodes it, and corrects the text for width factor and text height. This one works fine.
I wanted to add the feature of scaling my selection with a user input value. This is the lisp datblkxxx. This one doesn't work. (that is it doesn't correct the text for width factor). I can't figure it out.
We've recently converted all our microstation drawings to autocad now that the company has decided to go with one cad program company wide.
One of the issues we are having after getting the drawings back from the this co. converting them is the cells to blocks convertion inside the drawing. when we open a drawing and see a "Fuse" block for instance and if it a has multiple inserts, it named them:
Fuse
Fuse_1
Fuse_2 etc....
is there a lisp routine or some command that would replace the "Fuse_*" blocks with "Fuse"..I've been searching the forums and know about the express tool Replace Block but need to be able to automate somehow.
I thought about trying to rename each of the "Fuse_*" but of course it won't let you rename to a block name that already exists..
I am looking for a routine that will replace all blocks named "DgnMisc_nodepoleind" with a block named "DgnMisc_nodepoleind2" keeping the insertion point. I could use (command "-insert" "DgnMisc_nodepoleind=Y:/ACAD2007/DA settings/Library_new_scale1/DgnMisc_nodepoleind2.dwg" NIL ) but my problem is that the block I want to replace is used on two different layers and I only want to replace the ones on layer "TPSYM01".
View 3 Replies View RelatedI have a dynamic block that has a nested temporary block inside it. What I am wanting to do is replace the temporary block with the permanent block. I have tried several different variation of coding but I cannot seem to get this bad boy to work. have used:
(vla-put-name (vla-item (vla-get-blocks (vla-get-activedocument (vlax-get-acad-object)))) "tempBlockName") "newBlockName")
this gives me a duplicate names error.
Is it possible to change the system variable "TEXTSIZE" with an autolisp routine? I have hundreds of drawings that have varying textsize settingings and I can't get it to let me change it, unless I go into "Style" and manually change the value to "0" before I run the routine, and there are simply too may drawings to do that everytime. So, is there a way to reset the textsize to 0 through Lisp?
View 5 Replies View RelatedI am writing a LISP program to generate development of surfaces. Once the entire drawing is completed, I want that the input data to be displayed on drawing window as text.
View 2 Replies View RelatedWhen scrolling through the list of variables (accessed through the commands prompt -> Setvar ->?
->*)
that all variables pointing to a path show backslashes except for SAVEFILEPATH.
I'm looking for a way to find out what all plot styles are set in drawings in a sheet set.
We are transitioning from color based pen settings to style based and would like to be able to export a log that shows the variable PSTYLEMODE for each drawing in a sheet set. I plan on using ScriptPro to run it on the full sheet set.
Civil 3D 2013
Windows 7 64-bit
Xeon W3550 3.07 GHz
Nvidia Quadro 4000
12.0 GB RAM
1) I want to search the drawing for the pre-define block names given in the program.
2) If the are there, I want to replace them with the new version.
3) Program replaces the first block it finds, then tries to insert that block.
Is there a way to modify this script so you don't have to manually choose the blocks. Instead have it find all block names starting with "Supply Diffuser 24x24" and replace them with a block in the drawing named V01.
(defun C:CHANGEBLOCKS(/ printDebug ssAll ssAllTotal ss ssTotal ssCount ssCount2 ssTotal ssMainBlock ssMainBlock entListMainBlock ssBlocks entListBlock entListBlock2 entElementNewBlock entElementOldBlock entElementOldBlock2 oldBlockName) ;PROGRAM CHANGES MULTIPLE BLOCKS ;WRITTEN BY --- RAUL BENITEZ ;Command reference ;subst - returns a list with a new item substituted for every occurrence of an old item ;quote (or ') - easy way to make the string into a list. ;cdr - returns a list containing all but the first element of
[code].......