AutoCAD Visual LISP / AutoLISP :: Change Multiple Blocks Attributes
Feb 27, 2013
We wanted to automatically fill a block's attributes from a selection in Excel. I have a piece of code that has the user select/pick a block to fill. What I want is for the selection to fill multiple blocks in an active drawing. Some of the blocks are the same - which means the same tags/attributes. I've included the code that allows the user to select the block and throws the Excel selection to certain attributes.change the code so that
1) I don't have to manually select blocks - it will find them.
2) One cell (from Excel) will go to multiple blocks - some are same block name.
3) An IF statement that if a certain cell isn't blank/nil
(pretend it would be (nth 21 vl) change DESC11 to XYZ and DESC12 to ABC. For Block namesake we'll call one, BLOCK1 (say it has 3 instances and gets different info in each case) BLOCK2 (say it has 2 instances, also gets different info) BLOCK 3 AND 4 both have an attribute - DESCAA1 that gets different info from Excel.
(defun C:AUTOFCM (/*error* adoc attribs blkobj enExcelapp Sel Sht Rng vl Wbk ) (defun *error* (msg)(if adoc (vla-endundomark adoc)) (if (and msg(vl-positionmsg '("console break""Function cancelled" "quit / exit abort") ))(princ msg)(princ "Error!") ) gc) (princ) ) (or adoc (setq adoc (vla-get-activedocument (vlax-get-acad-object))) ) (vla-startundomark adoc) (alert "Select a range of cells in Excel.") (setq ExcelApp (vl-catch-all-apply (function(lambda ()vlax-get-or-create-object "Excel.Application") )) ) ) (if (vl-catch-all-error-p(setq Wbk(vl-catch-all-
[code]....
View 1 Replies
ADVERTISEMENT
Jan 5, 2012
I've been trying tons of different solutions to solve this problem: insert a block that has an attribute which happens to be the last object id.
This is the best code I tried so far but without any succss.
(defun c:q1()
(command "_.PLINE")
(while (= (getvar "CMDNAMES") "PLINE")
(command pause)
[Code] .....
View 9 Replies
View Related
Mar 1, 2013
I need a function that will allow me to do a "divide" with blocks but I need the single attribute to remain intact.
I need the blocks to align with object and keep the attribute. I did get it to work with constants but the function that I need to run next failed because of the constant. My variable is preset and locked.
View 9 Replies
View Related
Sep 5, 2013
I'm using a blocklibrary, where I stored all my blocks, most of them have attributes.
Now I'd like to simplify my workflow and want to update the blocks that I inserted in a drawing trough LISP.
Is there a way to update all inserted blocks and attributes of the whole drawing a once? The idea is, that the LISP checks the whole blocklibrary and updates the inserted blocks that to not match with the once from the library.
View 9 Replies
View Related
Jan 4, 2012
i am trying to restrict users from modifying certain attributes in a block,i can create the blocks with some of the attributes on locked layers, but then autocad pops up an annoying alert box, is there a way to disable this? the other option i can think of is to redefine the commands *ddedit, *attedit, *ddatte,*attipedit,
View 5 Replies
View Related
Apr 4, 2013
I need a lisp code to burst all "blocks with text/attributes inside" in selected area. That means user should select an area (window selection) and lisp program should be find all blocks with TEXT or ATTRIB inside in selected area and then applys "BURST express tools" command to all these blocks in the selected area by user.
View 9 Replies
View Related
Jan 8, 2013
There is a quick way to remove all attributes, including in nested blocks. Looking some lisp in the forum, I can't find one code for remove this elements completely.
View 9 Replies
View Related
Sep 4, 2011
Any routine that will allow to draw a polyline through existing blocks, in the order the blocks should be numbered? Therefore when the sequence has been specified by the polyline then user to define the number system required, and the blocks are automatically numbered in the sequence of the polyine start to finish.
View 9 Replies
View Related
Aug 8, 2012
I know how to retrieve the entity information from the block, but can't figure out how to write the loop statement to loop, look for first attribute, assign to a variable, goto next attribute, assign to different variable, etc., etc...
In my research, most programs I've seen it execute the loop, assign to a variable, then print/put that data somewhere, loop again and utilize the same variable to print/put the next data somewhere.
I would like each attribute within a block to be assigned a separate variable.
View 7 Replies
View Related
Oct 3, 2012
How to create a lisp to automatically export attributes from selected blocks to defined txt file without having to everytime confirm the file name, location and if the file shall be replaced?
Meaning is that I often export attributes to txt file for further use. It is always the same file (I just overwrite it always).
The way I do it now is selecting blocks, using ATTOUT command, then going to the desktop, selecting ATT.txt file and confirming that it is to be replaced.
Is there a way to make lisp or script that will just do all it in at once?
I found on forum such a lisp as below, but it exports all ablocks on drawing and it exports to txt file which is located in same place as drawing and with same name as drawing. Tried to modify it but without success:
(defun cut-att ()
(load "attout")
(setq fna (strcat (getvar "dwgprefix")
(acet-filename-path-remove (acet-filename-ext-remove (getvar "dwgname")))
".txt"
))
(setq ss (ssget "X" '((0 . "INSERT") (66 . 1))))
(bns_attout fna ss)
)
Same question for ATTIN - I use attin and always same file name from same location - how to automate it with one command?
View 9 Replies
View Related
Nov 16, 2012
I am looking for a way to create a master list of construction notes then use blocks attributes with fields to link to that master list. That way if the master list changed the note bubbles would change as well.
Sheet sets are being used with this project but I can't think of a way to make it work with the existing sheet set technology.
View 1 Replies
View Related
Mar 21, 2013
This time I'm wrestling with getting the values from multiple blocks. The blocks all have the same name but at least the attributes have names this time. Each block have exactly 4 attributes, like: att1 (a number representing chronological order), att2 (some data), att3 (the actual date as a string of when the data was added), att4 (some more data)
I need to get and store the attribute's values. I was hoping to make a selectionset of the blocks and step through using the chronological order number.
At this point I have tried several combinations of foreach and ssget "x" (list (cons 2 MYBLOCK)), but I keep getting errors that I'm sure are telling me that I'm not passing the correct information to the function for iterating through. I'm banging my head.
(DEFUN c:GFOR (/ ATTLST REVBLK CNT CNT1 BLK RBLK ATTVAL ATT REV#)
(SETQATTLST(LIST "R#" "INIT" "DATE" "DESC")REVBLK(ssget "x" (list (cons 0 "INSERT") (cons 2 "REVISION")))CNT0CNT10 )
(vlax-ldata-put "dict" "RevTotal" (BLKCNT "REVISIONS")) (FOREACH BLK REVBLK (SETQ RBLK (ssname BLK CNT1)) (setq ATTVAL (mapcar '(lambda (x) (vla-get-TextString x)) (vlax-invoke (vlax-ename->vla-object RBLK) 'GetAttributes))) (foreach ATT ATTLST (SETQ REV# (STRCAT "REVISION" (1+ CNT)))
(vlax-ldata-put "dict" REV# (member ATTVAL)) (setq CNT (1+ CNT)) ) (SETQ CNT1 (1+ CNT1)) ) (PRINC))
View 9 Replies
View Related
Mar 23, 2003
I have a lisp routine that uploads all the blocks contained within a specific folder and inserts or redefines all blocks of the same name within the current drawing.
My problem is that when I run the routine I prompts me that it can't fine the folder? I created a folder called "blocks" and is located straight onto my C:..........but it still doesn't work.
;FUNCTION TO UPDATE ALL BLOCKS WITHIN A DRAWING
;FROM A SPECIFIC DIRECTORY
(defun c:bup()
(SETVAR "cmdecho" 0)
(setq sst (ssget "X" (list (cons 0 "INSERT"))))
(setq c1 0)
[code].......
View 3 Replies
View Related
Oct 30, 2012
I am looking for a lisp routine or rename mulitple blocks by keeping the same name, but adding a suffix to it.
I have used "rename" block to add a prefix to multiple drawings, but it doesnt let you add a suffix. (As far as I can see)
View 7 Replies
View Related
Jan 23, 2012
I was able to find/update a LISP program that returns the dynamic block to its original state, overriding the anonymous name and make the actual block name the effective name. I am in the process of manipulating the LISP program so I can select multiple blocks rather than one at a time.
(defun CYMEFFEC ()(vl-load-com) (setq obj (vlax-ename->vla-object (car (entsel "Select blocks: ")))) (vlax-put obj 'Name (vlax-get obj 'Effectivename)))
View 3 Replies
View Related
Feb 4, 2013
I have to update a block in literally thousands of cad files. I have the book "AutoCAD Secrets Every User Should Know About" and the author gives examples of this by using a Batch File, Script File, and then Lisp Routine. Any easier way to do the following:
Insert "Gennnotes=" (updating the block) into any drawing that has this block in the drawing already, if not Quit.
Typically to do this I would open the drawing "insert" "gennotes=", then cancel the command and save the drawing. I have a lot of subfolders that also hold drawings so the command would have to search through each subfolder for dwgs.
Like I mentioned above, I tried to use the Batch File/Script Method but my batch file failed. It could find the folder Autocad 2012 - English. For some reason it was not seeing the spaces in between. Not sure. Here's the batch file portion of the routine:
Batch file:
For /r C:Sybex %%f in (c:sybex*.dwg) do start /wait
C:ACAD2012Autocad 2012 - Englishacad.exe "%%f" /b
C:gennotesupdate.scr
View 4 Replies
View Related
Dec 27, 2013
I have a CAD file with a couple hundred detail blocks in it, and I am trying to standardize them without haing to block edit each detail block.
What i am trying to do in each block is as follows:
- Explode all dimensions, leaders, and blocks
- Change all objects to layer "0"
- Change all lineweights to default
- Change all object on colors 7 and bylayer to byblock
- Change all text and mtext to arial font
- Delete all points
Civil 3D x64 2012
Win 7 x64 Ultimate
I7 3820 (3.6ghz quad core with HT)
32gig RAM (Corsair XMS3 4x8g)
Intel x z79 mobo (BOXDX79TO 2011 socket)
Radeon HD 7850 2gb GDDR5
View 3 Replies
View Related
Oct 2, 2013
I don't give the right keywords with Google !?So from a classic selection (or ALL for ALL Blocks of the DWG) of entities,
we will keep ONLY blocks (Static or Dynamic)I am looking for a Lisp/VLisp routine to update all Color of Hatches inside Blocks when the Hatch Color is xxx If the color hatch is NOT XXX we don't update !
The problem : update all hatch from blocks where Color = 255 (or any other value)
---> other classic Color (1-256)
--> RGB Color 255,255,255 or any other
I don't know at all how to switch hatch entities from classic color to RGB color inside a Block..And dynamic block in Lisp/VLisp are far from my level 0.2 in Lisp ...
View 5 Replies
View Related
Nov 1, 2013
I have 4 Dynamic Blocks with the same name, but each are on different layout pages. I need to change the visibility state of all 4 to the same value. So far every attempt of mine has failed.
My process at this point is to: build a selectionset of all 4 Dynamic Blocks with the same effective name, convert the selectionset to a list of entity names, then use a foreach to change the visibility states one at a time. Currently, I get "error: bad argument type: lselsetp <Entity name: 7ffff7b6c90>". <Entity name: 7ffff7b6c90> is the entity name of the first block in the list. I'm guessing it's because the block is found on a non-current tab
(defun chgdynprop (e propname newval / obj v vval sal tot i) (setqobj (if(= (type e) 'vla-object) e (vlax-ename->vla-object e))) (if (= (vlax-get-property obj
View 3 Replies
View Related
Sep 5, 2013
I am trying to select multiple objects and change them. However, the following code lets me only change one at a time. Even when I select a window around obejcts, it only changes a single item.
start of Same_Cannoscale.lsp(defun C:SCS ( / anno-v ent dict cansc entsc sc-list test oce)
(setq anno-v (getvar "ANNOALLVISIBLE")) (setvar "ANNOALLVISIBLE" 1) (if (= (getvar "CVPORT") 1) (princ "
In Paperspace. ") (if (setq ent (ssget ":S:L"))
[Code] ........
View 5 Replies
View Related
Feb 6, 2012
We have a few hundred drawings that we need to change certain block attributes. We need to change the valve of the text in that attribute from whatever it is (doesn't matter what it is) to a specific text string.
For example: If the attribute is called "name" and has the text string of ALAN in it in some drawing or BRUCE in other drawings, we want to chaneg all drawings to TOM.
View 4 Replies
View Related
Apr 12, 2012
Is there a way to change a specific attribute in a block found over x-amount of papers pace tabs?
At current I can only change one tab at a time.
View 7 Replies
View Related
Jul 18, 2013
I have an attribute blocks and this att block has two tag values , is there a simple code for to change 1st tag values automaticly according to 2nd values ?
for example :
1st tag (50x50) - 2nd tag ( 100 ) ==> 50x50-100
if i enter 201 valuse to 2nd tag then 1 st tag has to change as 100x100
if i enter 501 valuse to 2nd tag then 1 st tag has to change as 150x510
I attached a jpg file for explain much better
View 9 Replies
View Related
Feb 28, 2011
(defun CELBLKS ( / e blk ss blkl)
(setq blkl "" ss (ssadd))
(while (setq e (entsel "
[Code]....
i have this lsp, it works great but how can modify it if i want select with a window.? exemple: if i have 3 differentes blocks, i want to select them with windows and the lisp select all blocks that are identical of those 3.?
View 9 Replies
View Related
Jan 24, 2012
I have a project in 3D that I would like to export to Stadd. This requires lines rather than blocks. Is is possible to convert the blocks in the attached dwg file to to lines that are centered on those blocks?
View 9 Replies
View Related
Nov 18, 2011
I have this snippet that inserts a block “Exit_Arrow”. The block has one attribute. Is it possible to force the attribute to remain at “0” rotation regardless what angle the bock is rotated?
(defun C:Exit_Arrow (/ LA DS)
(setq LA (getvar "clayer"))
(setq DS (getvar "dimscale"))
(C:TTEXT)
(command "._insert" " Exit_Arrow " pause DS "")
(setvar "clayer" LA)
(princ))
Is it possible to create blocks whose attributes remain at "0" rotation regardless the host block's rotation?
View 9 Replies
View Related
May 16, 2013
I isolated 3 attributes as you can see with my code. My object is too take the value of blkDESC1 and set it as blktag, and then take blkDESC2 and set it as blkDESC1, and erase blkDESC2.
(defun c:aup (/ dxf ent dxf1 ent1) (defun dxf (code ent) (cdr (assoc code (entget ent))))
(progn (if (and (setq ent (car (entsel "
Select an Attributed Block: ")))
(eq "INSERT" (dxf 0 ent))
[code]........
View 1 Replies
View Related
Aug 6, 2013
I have a block named "WD_MLRH". There are 3 specific attributes which I want to change in it. The attribute names are.
RUNGCNT, RUNGDIST and RUNGFIRST.
RUNGCNT will = 20
RUNGDIST will = 1.0 (or 1 will suffice)
RUNGFIRST will be decided by a user input.
Something along the lines of...
(setq RUNGFIRST (getint "Enter first rung number: "))
I'm sure this is completely wrong, but i hope that portray what I'm trying to accomplish.
View 9 Replies
View Related
Sep 12, 2013
I have searched the web and the Autodesk Discussion Group for a LISP Routine that allows me to convert all attributes in a drawing to Layer 0 but i have had no luck. It would be great if the LISP could edit xrefs as well although not sure if this is possible.
**BATTMAN command will take too long for the hundreds of blocks, xrefs and drawings i need to edit.
View 2 Replies
View Related
Oct 16, 2012
I downloaded a lisp routine that will align block attributes. The problem is I can only select the attributes one at a time. I'd like to be able select multiple attributes using the selection window or a crossing window, but I haven't had much luck. If you use the AEATTSHOW command, it give you a prompt to "select using window" by pressing W. I'd like to have the same functionality for my Align attributes routine.
Below is the portion of code I currently have to select attributes one at a time:
;* Select all attributes to align with the parent selected above and add the attribute entname and the block
;* entname to a list in format ( (AttrEntName BlkEntName) (AttrEntName BlkEntName) (AttrEntName BlkEntName) )
;*
while (/= TempAttr nil)
(setq
TempAttr (nentsel "
Select Attributes to align: ")
[Code] .........
View 5 Replies
View Related
Oct 11, 2011
I have to go through quite a few drawings and extract the attribute vales of the whole drawing and then a subset contained within a couple of polylines.
The whole drawing is Ok as I can use at out or the data extraction, but its the ones contained within a polyline. How do I do that?
View 9 Replies
View Related
