As the other mentioned in the comments sections of the article below, I am getting a specified cast is invalid on the line td.Show(). I've tried the blank method, and passing in the main window handle with no success.
[URL]
The company i'm working used to draw their casted parts in Autocad. They added the extra material (before milling) with a dashed contour line. Now we work with Inventor 2010 and the models are all created 'finished'.
Now the situation is that the CNC-programmer is adding this 'given' material in his Gibs-cam application in order to write his program. Due to that the discussion appeared what is best. To add the material in Inventor or in Gibbs. I'm interested to hear some workaround according to this.
I have a piece that I'm trying to develop to add into an assembly. The piece I'm trying to create is a cast piece of steel that I'm trying to form to a radius. The piece basically starts out as a flat part and then is formed to a radius. I want to form it from flat to radius so that the contours will match the radius of the piece.
View 5 Replies View Relatedi have a vb.net dll in network drive,everything is OK except on one machine which installed bluebeam, error msg as below:
Unable to cast object of type 'Bluebeam.Interop.acad16.AcadDocumentClass' to type 'Autodesk.AutoCAD.Interop.IAcadDocument'.
in my code,nothing is related to Bluebeam.
I'm working in a dynamic block and I think that I've had to mark or unmark some option in the program because since yesterday I can't use as an initial point of any parameter some central points. I mean, when I try to specify the initial point of any parameter (e.g.: rotation) where the four lines converge, the program tells me that the " 2d object is not valid".
View 5 Replies View RelatedMaking a part that will have the size as an option to pick. Issue is Ilogic does not like it. I have a list that has sizes like:
3" X 2"
4" X 2"
4" X 4"
But when I put in the code
If Plate_Size = "3" X 2"" ThenParameter("Dim_X") = 3Parameter("Dim_Y") = 2Parameter("Foot_Code") = "A"ElseIf Plate_Size = "4" X 2"" Then Parameter ("Dim_ X") = 4Parameter("Dim_Y") = 2Parameter("Foot_Code") = "B"End If it gives me an error
Error on Line 4 : End of statement expected.and highlight the If Plate_Size ="3" X 2"".I know it has to do with the X but I an't remember what to do having brain fart.
This drawing appears visible in preview, but all type of AutoCad versions (full, LT from 2006 to 2013) claim it is unvalid.
It may have heavy gradients in it.Would there be any way to recover this file?
[URL]
I am having troubles attaching files to the existing .dwg file. I am trying to attach 6 drawings to one file, but evrytime i do it, it gives me a drawing id not valid error.
View 6 Replies View RelatedI lost a portion of a dwg. and downloaded a file from our backup service. When I try and open the file in Autocad, the messenger says "drawing file is not valid".
View 9 Replies View RelatedI'm trying to make a curved wall with different heights, but i can't manage to do the loft of the object. I keep getting "The selected entities are not valid."
I tried remaking all the little polylines but nothing seems to work..
A Drawing File (dwg) was accidentally delete and was retreived, but now can not be opened. Error message is "Drawing File is Not Valid". how to repair or fix this, so the drawing file can be opened.
View 6 Replies View RelatedI have AutoCAD 2010 and the drawing was saved in 2010 as no one in my company has a higher version. also unfortunately i am not able to post the drawing as it is part of a current project.
So no matter how i open the drawing it prompts me with drawing file not valid.
Using VB2010 Express to practice writing code to run things in Inventor 2012. I am an extreme beginner at this, and I am trying out a simple program that opens up Inventor, and when you click a button, it will open up the filename listed in the subroutine. I have attached a .jpg of my code. The program will open Inventor, and open the file, but as soon as the file is finished loading and displays on the screen, it throws the error you see in the .jpg.
View 2 Replies View RelatedI am using OffsetTaget.isValid in my subassembly.But i realize that when i put this formula it checks the whole drawing for that target and if the target polyline exist even a piece of polyline in the drawing then C3D considers it for all sample lines.Is ıt possible to be able to check each single sample line if it is going to intersect that target polyline or not?
Civil 3D 2014 x64
Windows 7 64-bit
16GB RAM
I'm trying to make an application that would take a drawing(dwg) and convert it to pdf. Since I can do it directly in autocad 2013, i presume that there should be a function in the API, that i could use to do the same. So far, i tried with AcadDocument.export(filename, FileExtension, AcadSelectionSet) with no luck. I cannot put PDF as a valid file extension.
Here's my code
Public sub SaveToPDF(ByVal psfilename As String)
Dim oAutocad As AutoCAD.AcadApplication = New AutoCAD.AcadApplication()
Dim oAcadDoc As AutoCAD.AcadDocument = oAutocad.Documents.Open(psfilename, True)
Dim sFolder As String = psfilename.Substring(0, psfilename.LastIndexOf("") + 1)
[code]....
I have been running AutoCAD LT2002 on a very old desktop computer and am attempting to switch to my new laptop. I have the original CD, Serial No., and CD Key. I have switched computers many times in the past and have had no problems installing this software on any of them. This time, it is giving me a "serial number not valid" message and will not let me proceed with the installation. I had some difficulty entering the number initially (the label with the s.n. was quite faded, but I KNOW that the serial number is entered correctly now-- what do I do?
View 6 Replies View RelatedI have a mixed environment where I have some users are opening .dwg files with DWG TrueView 2011 and others with AutoCad LT 2012. I am able to open the file immediately with DWG TrueView 2011, but with AutoCad LT 2012 they display an error message of "Drawing File Not Valid". In order to view the file I need to go into File>Open> Choose the file located on a mapped drive and select "Open Read-Only". Is there a way this can be changed where I can automatically open files as read only? I have changed the permissions to the share to allow full control to a particular user for testing purposes and it appears that the files are not in read only when examining the properties of it.
View 1 Replies View RelatedI don't know what happened, but my autocad file doesn't open up with a message "drawing file is not valid". I opened it at home once in Autocad 2012 - Student version and I open it at school usually every other day in Autocad 2012 - Educational version and it opens up properly at both places. But this tuesday I tried to open it, and it didn't open. I really need this file to be recovered because this drawing was complicated and I finished it. So, it will be a real pain to do it all over again plus the time I will waste. I am going to attach that file here.
View 8 Replies View RelatedOur staff can not get this file open. It says "Drawing file is not valid". It was emailed to them. He tried sending over as a 2000 drawing then tried it as 2007. We have AutoCad 2010 and 13 available to us, but no luck.
"Attached is a 2007 version of the same dwg. We have an Autodesk dwg viewer that we use here when we are sent a dwg and so far I have been able to open every file I have sent you with our viewer, so I am not sure why it is not working on your end. What I did though was opened the drawing in our autodesk viewer and then saved it from that."
I received a dwg file from my architect through e-mail. When I open it in Autocad LT 2004, a window pops up stating, "Drawing file is not valid." I forwarded the e-mail on to my boss with the same file and it opens perfectly on his version of Autocad LT 2004.
The only difference between our computers is that he is running Windows 7 and I am running Windows XP. The architect is running Windows 7.
At the end of the day yesterday our server crashed while I was working on a drawing and today when I tried to open the drawing I got the message 'Drawing File is Not Valid'. Is there a way to recover the drawing? I tried the recover command but I got the same message. i tried converting the BAK file and CAD did not respond.
View 2 Replies View Relatedi am trying to put a hatch down and am gettin this error 'Valid hatch boundary not found'. now am quite sure the area is enclosed so as far as i can see their should be an issue. the areas autocad is referring me to are are link together and have been replaced but i still get the same issue, when i max out the zoom their is only a tiny dot
View 6 Replies View RelatedI am looking for a way to have the ok and apply button gray out until there is a valid selection made in the UI. How can we control if those 2 buttons are active or not?
View 2 Replies View RelatedI have a whole folder of drawings that if I try to access I get "Drawing file is not valid".
I have read a bunch of posts and have tried the following:
1. I have tried to insert the drawing into a new blank drawing but nothing happens
2. I have searched all of our drives for BAK and SV$ files and have found none
3. This past summer our team did a clean-up of the drives and deleted all of the BAK files
4. I have tried to copy, send, or print the file and get the same error message
This file contains the base plans for a building we have that is XREFed into our furniture, electrical, security, etc. plans.
I'm getting a strange error with my iLogic code running parameters in my assembly. When I have one "if....then..." my rule runs fine. Even two statements work. But for some reason when I get to a certain number of statement I get an error: I've attached some sample code and snapshots of my error screens.
If FLANGE_STYLE_BOTTOM = "2in 150 BFV" ThenParameter("RD FLANGE:1", "OD")="6"Parameter("RD FLANGE:1", "BC")="4.75"Parameter("RD FLANGE:1", "HOLE_SIZE")=".75"Parameter("RD FLANGE:1", "NUB_HOLE")="4"Else If FLANGE_STYLE_BOTTOM="3in 150 BFV" ThenParameter("RD FLANGE:1", "OD")="7.5"Parameter("RD FLANGE:1", "BC")="6"Parameter("RD FLANGE:1", "HOLE_SIZE")=".75"Parameter("RD FLANGE:1", "NUB_HOLE")="4"Else If FLANGE_STYLE_BOTTOM="4in 150 BFV" ThenParameter("RD FLANGE:1", "OD")="9"Parameter("RD FLANGE:1", "BC")="7.5"Parameter("RD FLANGE:1", "HOLE_SIZE")=".75"Parameter("RD FLANGE:1", "NUB_HOLE")="8"Else If FLANGE_STYLE_BOTTOM="5in 150 BFV" ThenParameter("RD FLANGE:1", "OD")="10"Parameter("RD FLANGE:1", "BC")="8.5"Parameter("RD FLANGE:1", "HOLE_SIZE")=".875"Parameter("RD FLANGE:1",
[code]...
my code is:
Dim AcadDoc As Document = Application.DocumentManager.MdiActiveDocument Dim CurDb As Database = AcadDoc.Database Dim lt As LayerTable = DirectCast(tr.GetObject(CurDb.LayerTableId, OpenMode.ForRead), LayerTable)
if fails on last line with error:-
Operation is not valid due to the current state of the object.
Is using nullptr (instead of NULL) valid in an Inventor Addin?
(I'm trying to drag myself into the second decade of the 21st century)
I just installed AutoCAD Civil 3D 2012 last week from upgrading from 2011. I just noticed that when I set up a new drawing coordinate system for a horizontal datum, I get a message "Coordinate System Code is not Valid". I know the files are loaded under the documents and settings folder, but I don't know why it's not reading them.
View 2 Replies View RelatedI have recently acquired AutoCAD 2012, I have a book called "AutoCAD 2000 Bible", and I was wondering if the contents of this book (based on AutoCAD 2000) can guide me through AutoCAD 2012 as well.
View 2 Replies View RelatedI've created a simple cutdown kerb in Subassembly Composer 2013. I can't add Point, Link or Shape Codes & get the error message " The code (Flange for example) is not a valid input parameter or variable.
View 1 Replies View RelatedI'm having issues trying to create a point table. I have used this process before with no problem but now for some reason C3D won't create the table. I get an "NO VALID SELECTION" after selecting the C3D points. Why I'm getting this error? All my points are C3D points and C3D recognizes the points while the POINT TABLE CREATION menu is still visible but once it goes to create the table i get that error message.
View 2 Replies View Related