AutoCAD .NET :: Printing Additional Instructions On Command Line
Sep 26, 2011I need to print additional instructions on the command line, other than just Select Objects such as select attributes etc.
View 1 Replies
ADVERTISEMENT
AutoCAD Visual LISP / AutoLISP :: Printing Dotted Pairs To Command Line?
Oct 2, 2013I have a list of dotted pairs and some of the entries are paired with a deeper list others contain mostly string data. the issue is that I need to print the data to the command line with a newline to seperate them. So I want the output to look like:
;from(customer (city . "Mesa")(zip . "85213")(project (scope (demo . "some description")(construction . "some description")) (cost (subtotal . "some subtotal") (total . "some total"))));tocity Mesazip 85213demo some descriptionconstruction some descriptionsubtotal some subtotaltotal some total
I can print the entire list easily with:
(FOREACH IDX (CDR (VLAX-LDATA-GET "JobData" "LIST")) (PRINC "
") (PRINC IDX) (PRINC "
"))
But, the issue is that when the data is a list it print it out to a single line making it very difficult to read. I tried adding another FOREACH into the loop that I had hoped would iterate through the deeper list and print those lines out in a simular fashion but I only get an "error: bad argument type: consp " and it displays the first element of my list.
I tried to evaluate the IDX and check the type, so that if it is a list then it triggers the deeper FOREACH but it seems I did it wrongly.
Illustrator :: Brushes And Appearance - Adding Additional Strokes To Same Line?
Oct 8, 2012I am working with CS6 windows. I am having a problem when I made a brush, and add additional strokes to the same line.
Here is a pic of what is happening. You can see at the beginning of the arrow, there is a blue and pink link showing around the beginning of the arrow head. I added the pink and blue lines to the same line as the brush using the appearance tab.
Now if I add a dash to the the pink and blue lines, this is what happens... There is a little pink and blue line at the very tip of the arrow head. My dash options use for both the pink and blue lines.
My question is how to I get rid of this little line? What I am trying to do is.. use the black arrowhead on line with a stoke of 1 point black, and then under that have a 3 point stroke of white. In the image what is blue would be white, and what is pink would be black, and the arrowhead is correct as it is now. I had this same setup in CS4, and did not have that little line at the beginning.
here is my brush settings..
AutoCAD 2013 :: Command Line Appears Again After Plot Command?
May 15, 2012I press CTRL+9 to make the Command Line disappear while drawing. When I plot (or when doing a plot preview) , the Command Line appears again by itself. So I always have to turn the Command Line off manually after each plot
The bug still happens;
- if Dynamic Input is turned off or on
- if I plot to a real device or in PDF
- if the Cammand Line Palette i docked or floating.
This is not an issue in AutoCAD 2012 so I guess it has to do with the new way they programmed the revamped Command Line palette in 2013.
Using Windows7
AutoCAD 2010 :: Command Not Showing Up In Command Line
Nov 27, 2012without reiterating a lot of what is said in this thread: [URL] ......
This happen outside the potential malware infection?
if you care to not click-through, the problem is that certain commands (not all of them) simply do not disply in the command line. so the MOVE command for example looks like this:
NORMAL:
Command: _move
Select objects:
NOW:
Command:
Select objects:
same with QSAVE and who knows how many others.
AutoCad :: Execute Line Command Like A Single Command?
Oct 27, 2013line command is a multiple command. there is a way to execute it like a single command?
View 4 Replies View RelatedAutoCAD 2013 :: Select Line Then Enter Command - Line Unselects
Jun 28, 2012if I select a line, then enter the move command, the line unselects also when I select a line, then hit delete, the line is still there both of these used to work
2013 Civil 3D
AutoCAD .NET :: Write A Text On Command Line At Same Line And Overwrite Existing
Jun 10, 2011Basically I got a process which is quite long , let's say 30 seconds.
I want put a counter at command line showing to
user how many objects has been processed so far. But I don't want to use New Line Feed to change the line and keep each new number at same line and same location of command line.
AutoCAD Inventor :: Fabrication / Assembly Drawings Like Lego Instructions?
Nov 20, 2012is there a way to make the drawings like Lego does for assembling the stuff? After you finish one step, of lets say three pieces put together, and you go to the next step those pieces are like grayed / shaded out and you know to build the next pieces in what position etc..
View 1 Replies View RelatedLightroom :: Print Off Instructions For Using 4?
Aug 25, 2012How do I print off the instructions for using Lightroom 4 ..when I try all I get is the comments at the bottom and none of the top info
View 3 Replies View RelatedAutoCAD Print / Plot :: Center Printing Command
Apr 24, 2012When batch plotting using an external plot utility from Model Space, I get pages with different placements on the paper, the issue appears to be that some sheets are selected for Center the Plot and some are not. Even though my plot utility has a selection for Center Plot, it won't override what is already in the page for this one option. Is there a line command I can run in a script that would allow me to set the plot to center without having to open each sheet and reset this manually?
View 3 Replies View RelatedPhotoshop :: Instructions Followed But Can't Move Layer Into File
Mar 4, 2013I was successful in following tutorial instructions to move one file into another, but one day later, I cannot drag a new file from the active window into another file. Have I inadvertently changed some setting?
View 2 Replies View RelatedPhotoshop :: Error :: The Instructions At 0x6963361ab Reference Memory Could Not Be Read
Nov 9, 2008While working on a complicated project involving copying and pasting into PSCS4 from several applications I received this error and Photoshop closed down with loss of my work.
I'm in Windows XP Pro SP3 and using a workstation with 2GB of error correcting memory. I had no such problems in PS3 and other applications work fine.
AutoCAD 2013 :: Cut Line Command?
Apr 13, 2013I've been searching for a command that could actually cut lines for purpose. For example, if I'm drawing a 2 line crossed, wish I could cut the 2 lines so they are now 4 segments. On a circle, I could actually draw a line that pass trough the circle on cut it off the way I wish. Does such command exists for autoCAD? Very often, I've many lines at the same time that I wish I could cut with a single one. The problem is that I don't wish to trim 'em and extend (losing time and long process). Sure there is also the div cmd, but this isn't what I'm seeking for.
View 7 Replies View RelatedAutoCAD Map 3D :: Command Line Next To Cursor?
Oct 18, 2012I had a problem this morning where for some reason I needed to do a drawing recovery on a map - which is fine, all seems well.
The problem is that now when I type a command, it doesn't appear next to the cursor anymore. It's not really a NEED having it there, but I've gotten to like that in the newer CAD versions, and now I can't find the setting that makes it come back. Sure I CAN type everything and have it show just at the bottom of the screen, but I'd rather have my dynamic field back.
How I can restore it?
AutoCad :: Blank Command Line?
Nov 20, 2012This is the problem I have. When I type something, ie a line length or a command, ie purge, whatever it is I type it is not shown in the command line... what am I doing wrong or what setting do I need to change..
View 3 Replies View RelatedAutoCad 2D :: Command Line For Dimension Fit?
May 3, 2011Command line for Dimension Fit
View 1 Replies View RelatedAutoCad :: Lost Command Line
Jul 26, 2011my command box has mysteriously vanished (more than likely my own doing) and I would really like it back!
View 3 Replies View RelatedAutoCAD .NET :: Getting Command-line Parameters
Jul 11, 2012From my .NET dll I need to get the command line parameters that were used when AutoCAD was launched.
In the unmanaged world I used acedGetAcadWinApp.
Is there a .NET equivalent?
AutoCAD .NET :: Get Input From Command Line?
Sep 30, 2013I am writing a API in .NET. I can send commands to the AutoCAd command line using the sendCommand feature but can i access the result returned too? I am not able to find the right class/function the redirect the command result back to my API
View 3 Replies View RelatedAutoCad :: Can't Enter Command Line
Aug 1, 2011I have a problem and as this has happened the first time I fire up autoCAD I can see that I am not going to have as easy a time as I did with 3D studio Max.
I found a tutorial on line, and it was talking about the command line, so i was entering points like it said, fine. I had to put it down as something came up at work. Go back to it to play some more, now I can no longer specify points in the command line, pressing space or enter just clears everything and asks to specify a point again.
What have I don't to make this happen, or is it a bug in the program. I have tried restarting again but still no.
AutoCad :: Command Line Changed All By Itself?
Oct 1, 2013I can't see that I changed any setting (never do) or did anything to make it so the instruction line under the Command: window at the bottom of the screen now expects me to enter text, i.e. In the Command Window we have "open", after I clicked on File / Open, but instead of being taken to the usual drop down of my hard drive the bottom line on my monitor reads, "Enter name of drawing to open <.>: The same thing happens if I try to save a drawing. This is making it extremely difficult to open and save, i.e. to work....
View 1 Replies View RelatedAutoCad 2D :: ED Command To Add Text To Dim Line
Jun 20, 2012I recently started using v2012 after some time using 2006 2008. I frequently would use the ED command to add text to a dim line but it appears 2012 uses a different command for this.
View 6 Replies View RelatedAutoCad :: Typing Cal At The Command Line
Jan 21, 2009I would like to calabrate a tablet when i type cal i get this
View 9 Replies View RelatedAutoCad :: Hidden Command Line?
Dec 30, 2013I've been trying to draw without the command line visible and am liking it. Have been using F2 if I need it while in a command but am finding the text window a bit obtrusive. It also gets hidden when you click in the drawing area.
Is there a way to activate the command line transparently? If you are in a command, Ctrl+9 cancels it.
AutoCad :: Command Line Placement
Oct 25, 2012I was going through some exercises in an ACAD book and floating my command line, etc. and now I can't get it back to it's original place. Or at least when I do it's covers everything there.How do I get it back to normal?
View 9 Replies View RelatedAutoCAD LT :: Fixing Line Weight When Printing
Apr 24, 2012I have been giving a drawing that I am unable to print dark enough with out my layers in some areas becoming way to thick and I was wondering if it is at all possible to select the whole drawing and just reset the line weights to a default setting with out having to go layer by layer.
View 2 Replies View RelatedAutoCAD LT :: Fixing Line Weight When Printing?
Oct 30, 2013I also use SpaceClaim 3D.
Generated drawing and created dwg. file.
Drawing looks good in AutoCad LT on screen.
Print Preview shows very heavy lines for dimension lines.
Dimension layer shows "Default" line weight.
Both print preview and actual printing has very heavy line weights for Dimension lines.
Not sure what to do to correct.
AutoCad 2D :: Get Line Weight In Layout? Printing OK
May 12, 2012I am aware some users like their lines very sharp and neat in the layout and make the line weight appear in the printing process.
However, I am wondering if I can see the the lines weight applied while drawing in AutoCAD. Is just I believe it will give a better "print preview" as I am working. It will be very annoying to keep going back to print layout to "hummm... How does the line look?"
PS: Yes, I know how to change the line weight.
AutoCad :: 2013 Not Printing Straight Line
May 21, 2013my autocad not printing straight line, everything look fine in PDF or autocad , but once I printed out my work the line not straight.
Version: Autocad 2013
AutoCAD LT :: Defining Attributes Using Command Line
Mar 28, 2013For some reason I cannot get the ATTDEF Dialoge box to stop appearing and get the command line prompts. I have all the system variables set correctly -
FILEDIA = 0
ATTDIA = 0
CMDDIA = 0
The ATTDIA should surpress the diaolog box and give me prompts but it does not.
