AutoCAD .NET :: How To Unload DLL

May 23, 2012

How to unload a .net dll? It's to trouble for me to debug a little programm of CAD.net.

View 8 Replies


ADVERTISEMENT

AutoCAD .NET :: How To Unload The DLL

Jan 2, 2012

How to Unload the DLL from Autocad...

the reason is after loading the dll files..

Autocad was creating fatal error..

View 9 Replies View Related

AutoCAD .NET :: How To Unload Application DLL File

Aug 7, 2013

I have made the .NET application with class library which provide us Application DLL file which will used to do our customization.

Once I have loaded my DLL and after that if I make change any thing in the Code and than I rebuilt it, I am getting the following error message:

Error    15    Unable to copy file "objReleaseSemiAuto.dll" to "binReleaseTest.dll".

The process cannot access the file 'binReleaseTest.dll' because it is being used by another process.   

Error    14    Could not copy "objReleaseTest.dll" to "binReleaseTest.dll". Exceeded retry count of 10. Failed.    SemiAuto

View 1 Replies View Related

AutoCAD Inventor :: What Could Be Causing All Add-ins To Spontaneously Unload Themselves

Oct 18, 2011

what could be causing all of my add-ins to spontaneously unload themselves?  For the second time in a week, I opened Inventor to have all of my add ins unloaded, and the "Load at Startup" and "Loaded/Unloaded" checkboxes are unchecked.  I am not doing this and I am the only user on this machine.  System stats and version below.

[URL]

View 4 Replies View Related

AutoCad :: Load And Unload ARX Applications Dynamically

Jul 12, 2013

I have few .arx applications for AutoCAD. In these applications few are menu based and others are command line. Now what I am trying to do is,Load the .arx app, run it and then unload it once the .arx application runs through a LISP command. .arx applications run once the user clicks on the tabs that are provided. .arx applications are written in VC++. Now I have a lisp file, which gets loaded once the user starts AutoCAD. In the lisp files I have declared these functions for various .arx applications;

(defun c:XYZ_program() (command) (command) (arxload "C:/ABC/XYZ.arx") (command "XYZ_program") (arxunload "XYZ.arx") )

It works fine for Programs which need input data from Menu based forms, but says error unloading xyz.arx for programs which need command line input. I was wondering if there were any commands in LISP that will make sure arxunload "XYZ.arx" will execute only once (command "XYZ_program") is executed.

[URL]

View 0 Replies View Related

3ds Max :: How Load/ Unload MAT File

Feb 28, 2011

I have loaded a material library file to material editor. Now every time open a file and I open the material editor I found those material libraries loaded, I don't want those files now, how do I can unload them?

View 4 Replies View Related

Revit :: Manage Links - Can't Unload Or Remove Linked DWG

Feb 11, 2010

I linked in a cad.dwg survey into my Revit model and I don't like the result. I'm trying to unload or remove the linked file now and I get an error message, "A serious error has occurred. It is strongly recommended that you use Save As to save your work in a new file before continuing."

Saving to a new file does not change this problem. I've tried cleaning up the survey file, moving the file to another location, changing from relative to absolute path. Revit shouldn't even be finding this file any more. Isn't linking similar to x-refing in AutoCAD?

How to get this dwg out of my Revit file?

View 3 Replies View Related

AutoCAD 2010 :: Load Statement In Profile To Automatically Load / Unload Cuix?

Jun 4, 2013

Is it possible to use a load statement in a profile to automatically load/unload a cuix?

View 7 Replies View Related

Photoshop :: Printing Problem -I Did Unload The Photoshop 6

May 1, 2004

Being new to this type of graphic program it made no sense to me have buy photoshop 6. The photoshop elements that came with my computer seems like the same program. I
can't do much with elements. The help pages in elements are confusing enough.

View 1 Replies View Related

AutoCAD 2010 :: Error / A Software Problem Has Caused Autocad To Close Unexpectedly

Jan 16, 2013

When i use AutoCad 2010, that is on a wind 7 OS, appear a message that indicate the next.

A software problem has caused autocad to close unexpectedly.

View 1 Replies View Related

AutoCAD LT :: Hatch Missing In Transparent Zoom In Autocad 2014

Oct 2, 2013

In Autocad 2014 when I use the zoom or pan command transparently some information disappears (hatch) and only reappears when I finish the command. This did not happen with version 2009.

View 2 Replies View Related

AutoCAD 2010 :: AutoCAD Could Not Open This File Or Could Not Parse A Fle Of This Type

Mar 22, 2013

I'm trying to attach a hyperlink to a PDF but I keep getting the error message " AutoCAD could not open this file or could not parse a fle of this type".  It also won't link to a Word document or speadsheet, but will link to a web page and a notepad text file.

View 3 Replies View Related

AutoCAD LT :: DWG To PDF

Oct 3, 2011

Why when making PDF out of DWG, many lines comes out vague?

It can be part of a line/block/text.

It shows only on the screen and not on paper in case I print it.

View 1 Replies View Related

AutoCAD LT :: Use DWG To PDF

Apr 2, 2012

I run ACAD LT 2010 on a Windows XP machine and also a Vista Laptop. I have tried to print the same drawing on both machines using the DWG to PDF facility with in AutoCAD. The drawing is a third party drawing in as much as I didn't draw it although it is an authentic ACAD DWG.

I get the same message but referring to different fonts - the message reads on the Vista machine:

"Cannot find or create the font "ArialMT". Some characters may not display or print correctly"

On the Windows XP machine it reads:

"Cannot find or create the font "Tahoma". Some characters may not display or print correctly"

The message seems to be generated by Adobe Reader.

View 6 Replies View Related

AutoCad :: How To Let It Use More RAM

Mar 8, 2012

My computer has 8 GB of RAM. However my autocad is not faster than a computer with 2 GB of RAM. I have Windows 7. Is there a way I can allocate more RAM to Autocad to make it run faster?

View 9 Replies View Related

AutoCad :: What Does XID Mean

Dec 8, 2011

I downloaded a titleblock to look at and one of his layers for the lines that made up the bounderies of the titleblock, was placed on the "XID" layer. It was interesting to see that the lines had the properties of Polyline, although to my eyes it looked like a line segment.

what XID stands for in this case?

View 4 Replies View Related

AutoCAD Map 3D :: Import SDF To DWG?

Jun 23, 2012

I have some problem with import SDF to dwg. Geometry in SDF is curve with mixed linear and arc segments.

But the result is not my expected result. (see image below) . All arc segments was imported not correctly.

I'm expecting my data is correctly in the sdf files, but some import mechanism  not work properly.

When I make connection through  FDO it's work ok.

View 2 Replies View Related

AutoCAD Map 3D :: GEO MAP Command

May 6, 2013

I've been attempting to use the GEOMAP command to bring satellite imagery into one of my maps.  I have followed theses steps:

1.  Signed into my Autodesk360 account.
2.  Assigned a coordinate system (SC83F) to my map.
3.  Entered the GEO MAP command and selected "A" for aerial image.

Following these steps, I am unable to display the aerial imagery.  

View 1 Replies View Related

AutoCAD LT :: PC3 And PMP Errors

Apr 12, 2010

I've created system printers for our office using the "Add Plotter" application of AC. I've filtered paper sizes for the different printers. However, these filtered paper sizes are not the same for all workstations.

E.g. If I filter out all paper sizes and only check ISO A0 and ISO A1, on some of the workstations there are other paper sizes available. How do I avoid this from happening?

View 8 Replies View Related

AutoCAD LT :: How To Make PDF Out Of DWG

Oct 10, 2011

How to make PDF's which were made out of DWG"s less vague?

Same lines can come out looking good or vague. Sometime part of blocks appear vague while the other side appear good.

View 4 Replies View Related

AutoCAD 2013 :: DWG To DGN

Nov 13, 2012

Using 2013, I have a drawing created in that other software ( Micro station). I opened it in autocad, and did some work to it.

View 2 Replies View Related

AutoCAD VB :: Plot To PDF

Dec 20, 2012

I have created a batch routine that plots PDF’s of a list of drawings.  Everything is working ok. It opens the drawing, turns on and off layers, and then plots to PDF.  The plots come out fine, but after each plot, it opens the PDF.  This would not be a problem for one or two drawings, but when doing a few hundred, it becomes quite frustrating.

I can see how to change this using the plot dialogue box, selecting DWG To PDF.pc3 and editing the custom properties. But no matter how many times I change it does not save, and will open the PDF.

I have found a work around by killing the process Acrobat.exe at the end of the plot.  But is there a better way of doing this?

View 1 Replies View Related

AutoCAD Inventor :: DWG To STP

Jan 7, 2013

we modeled prototypes of trains (locomotives) in 3dsMax, these models will be used to produce molds and thumbnails of these, you must give the producer STP files, max does not export these files, and we have exported in various formats supported by some programs if exported STP, eg Inventor, we have exported files are STL, oBJ and DWG, so far so good, all save the parts or layers without problem.

The problem comes when exporting from Inventor to STP, nothing happens, the STP file is as if you were empty, there is nothing ..

I have attached the DWG file, if possible, have 17 CAD models for export to STP. 

View 2 Replies View Related

AutoCAD .NET :: Cannot Set MdiActiveDocument

Aug 22, 2013

I cannot seem to set the MdiActiveDocument synchronously.

I have code inside a <CommandMethod> that creates a drawing and then writes any error information to the command line.  Since this is started in one document, if  a fatal error occurs and the drawing does not get created, that message goes to the original document's command line.

In the case where a drawing gets created with errors (say partial success), I would like the errors to appear in the new drawing (new active document's) command line.

The behavior when setting Core.Application.DocumentManager.MdiActiveDocument is peculiar.  The application can hang for a long time if you do not click anything.  If you click the document (from the taskbar or clicking on the window), it breaks out of the hang and continues to execute, but the active document is not changed.  The MdiActiveDocument still points to the original document.  You can also see that it does not change because doc.IsActive = False.  This state could be because when you clicked, you really did make the original document active (again? still?).  To break the hang, I think the click has to be on the original document.

On an example like [URL] ... there is no action taken after MdiActiveDocument is set, so I assume that it is actually set when the command is completed, not synchronously.  I am not absolutely certain of this, though.

 <CommandMethod("AUTODRAWPN")> _
 Public Sub DrawPartNumber()
 Dim ed As Editor = Core.Application.DocumentManager.MdiActiveDocument.Editor
If IsNothing(drwr) Then

[Code] ....... 

Is there a way to set the MDIActiveDocument?  Should it be hanging like this?  Should I be looking at an altogether different way to handle this?

Trying to use doc.Editor without setting the active causes a eNotApplicable error, so that is not a way out.

I am using AutoCAD 2013.  The following link implies that this could be a 2013 specific problem, but I do not know that for sure. [URL] .....

View 1 Replies View Related

AutoCAD LT :: LT Keeps Shutting Down

Jun 12, 2012

I downloaded the LT trial version with a new computer with Windows 7 Pro and LT keeps shutting down.  If I close a file the whole program shuts down or sometimes it just randomly shuts down.

View 2 Replies View Related

AutoCAD VB :: DWG To PDF Without Program

Aug 29, 2013

The purchasing group in my company need to batch plot autocad dwg files to pdf files to send to vendors. They do not have AutoCAD on their computers. I have done searches on the internet for programs, but I am leary of donwloading them. If I use the AtoCAD API in a program can I make it so they don't need AutoCAD to plot?

View 2 Replies View Related

AutoCAD Map 3D :: Plotting To PDF

Feb 25, 2011

I have plotted to PDF before, but on this particular drawing I'm losing some part of the drawing. 

Two viewports at different scales.  The larger viewport (zoomed in) plots perfectly.  The smaller viewport (zoomed out) only plots the CAD layer (green line), but does not plot the Shapefiles (green dots and gray lines).  Shapefiles are on their own layer, that layer is turned on. These are the only three items in model space; the black text and arrows are in paper space on the layout tab and render correctly in the large viewport. 

Is it a scale issue with the shapefiles in the small viewport or a plotting issue?

View 9 Replies View Related

AutoCAD Map 3D :: Connect JP2 Via FDO

Mar 7, 2012

I can connect to jp2 aerials via FDO but the images do not come in. They work fine with raster insert, why not FDO?

View 3 Replies View Related

AutoCAD .NET :: UCS Of Database

Aug 20, 2011

Is it possible to take Current User Coordinate System of external Database object, like

Application.DocumentManager.MdiActiveDocument.Editor.CurrentUserCoordinateSystem?

View 7 Replies View Related

AutoCAD LT :: Converting DWG To PDF

Jul 9, 2013

I have upgraded my Adobe reader to XI and when converting DWG to PDF the files comes out very heavy (heavier than the DWG!) and all curved lines comes out very very light comparing to straight lines.

View 2 Replies View Related

AutoCAD .NET :: How To Add Toolbar Using CUI

Jan 20, 2013

there is a problem with my code,when I load this dll,the toolbar‘s name can be fond in the customization dialog,but never shows in the UI(AutoCAD custom WS)。。。。It crush me up。。
     
[CommandMethod("AddToolBar")]
        public void AddToolBar()
        {
            CustomizationSection cs = new CustomizationSection(
                "C:\Users\Administrator\appdata\roaming\autodesk\autocad 2012 - simplified chinese\r18.2\chs\support\acad.cuix");
            CAD.Document doc = CAD.Application.DocumentManager.MdiActiveDocument;
            Toolbar newTb = new Toolbar("MyTool", cs.MenuGroup);
            newTb.ToolbarVisible = ToolbarVisible.show;
  
[Code]...

i dont no y

i am a chinese,know little english.so it is hard for me to find codes of this aspect at this website,can u get me the link of the code?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved