I am using a dllimport from accore.dll, but the entry point for the method in the dll differs between 32-bit and 64-bit version of AutoCAD. How can I check whether the AutoCAD application is a 32- or 64-bit version, i.e. the dll is 32- or 64-bit?
View 7 RepliesHow do I re-install a corrupted Photoshop CC app when the Desk Top CC shows the app as "up to date"?
View 2 Replies View RelatedI bought Adobe Photoshop Elements 9 but get the following alert: "Some of the application components are missing from the Application directory, Please reinstall the application." Can it be reinstalled? It is not available under "History" and none of the available installs appear to be for Mac OS X (Version 10.7.4). S
View 2 Replies View RelatedI have PSE9 and a macbook pro 10.9. I lost the original DVD that came with my purchase of PSE. Some files must have gotten corrupted because I can't open the program without reintalling. It says, "Some of the application components are missing from the application directory. Please reinstall the application." I have the serial number and all and I registered the product. Is there somewhere I can download a new copy to install?
View 7 Replies View Relatedat photoshop cs6 extended downloaded in july, i now get the following message: "some of the application components are missing from the application directory. please reinstall the application."
View 2 Replies View RelatedSometime in the past, I've drawn an arc, probably using an old deedplotting program, and imported it into Map3D.
I now have a new parcel that I'm plotting, and need to obtain the tangent of an arc on the parcel's perimeter.
Typically I draw a line, as close to the tangent as I'm able, and then toy with the bearings until I get it as close as I can.
This is a counter-productive means of finding the tangent bearing of an arc, and I'd really like to find a better way of doing this.
Is there a succint manner that I can pull a tangent line off an existing arc?
Using osnap this afternoon I thought I could do it, with the extension, but in testing it later, I found it was off by a good 2 or 3 degrees. While indeed a minor variance, I'd like to find a better way.
I am selecting items and grabbing their DBObjects, and then reflecting on those objects to inspect properties of the object. For example, I might have a DBObject that is actually of type Pipe, Duct, DuctFitting, Line, etc, so I am using TypeDescriptor reflection to handle various cases in as abstract a way as possible.
My first question is this: Is this the smartest way to grab all of the attributes of a give object? Is there another call I can make the retrieve all of the attributes for a Pipe and a Line (to very different types of objects).
Second, when I see a property named Length and it is a double I know it has to be a length and that I can use the units from the drawing. Is there a way to programatically discover this other than the name of the property and its type (double)? In other words is there some metadata I could retrieve about any given property against which I am reflecting, or is there a smarter way to get these attributes which might provided said metadata?
How to determine the length of a multiline. With a polyline if you click on it, it's length is displayed in the properties palette, but that doesn't work for a multiline as no length property shows up in the properties palette.
View 9 Replies View RelatedI have a .dwg drawing, and the same one but in .pdf file format. On the .pdf one, there stands the scale (1:500), but on .dwg one there is no scale. I was wondering, how could I determine the scale of the .dwg one?
View 9 Replies View RelatedIs there a way to determine FeatureLineStyle layer name using .NET?
View 2 Replies View RelatedIs it possible to determine which nodes are expanded using the API?
I want to make some changes to the node information in an assembly browser but as there are many hundred parts so I only want to do the operation on the expanded nodes to keep any delay to a minimum.
How to determine the order of objects selected (i.e text, block reference...). According to type or X, Y ..?
View 8 Replies View RelatedI need to project a surface/grading (or something of that nature) across my berm and have it intersect with the inside bank. This is better explained if you see the attached image. In the plan view you see 4 featurelines. Outside TOE, outside TOB, inside TOB then inside TOE. I need to project the outside TOE across the berm (shown in the section view) then create a new featureline where the line and inside slope of the berm intersect. Note that all the elevation shots vary as does the widths across the berm. What's the best way to do this?
View 9 Replies View Relatedis there any tool in inventor that can determine size of louver or quantity of louver base on heat generated?
we are designing a sheet metal box. we need to find out how many louvers we need.
Autodesk Inventor Professional 2014
Autodesk Product Design Suite Standard 2013
Microsoft Office 2007 & 2013
Windows 7 64bit
Synergis Adept 2013
Visual Studio Express 2010
Is there a way to use interference checks to determine what material needs to be subtracted away from other parts to get the clearance needed? (See Attached) The way I typically handle this is to project the lines from one part onto the sketch of another and proceed accordingly, however as you can see, it didn't work out well in this instance as the face of the part in question is not parallel with the sketch plane in the other..Therefore making the cut location inaccurate.
View 2 Replies View RelatedI want to check for the emptiness of a drawing file. whether the model space or layout is empty. is there any way to find it out.
View 1 Replies View RelatedHow can I tell when a viewport (any viewport) in paper space is currently active.
This is actually related to a .NET programming error, whereby even when the drawing is in Paper space, if a viewport is active, I am unable to programmatically access the Layout. I need to be able to, at a minimum, detect this condition, then switch back to full paper space (i.e. de-activate the viewport) if possible.
how to determine the mass properties of bolt.
View 4 Replies View RelatedHow do I determine position of the three 5,5 mm diameter holes? I am missing dimensions for horizontal position, am not I right?
View 1 Replies View RelatedHow to display the annotations properly. Perhaps this may just be a display or view setting but I beleive I have checked them all at least 3 times =).
Even in the video he explains all the things explained here but does not explain exactly how to make the dims and ext lines notate and display properly, in model or paper view (view port). I have tried many ways to create a view port in paper space and annotation several dimensions. I constantly get different text sizes and ext line scaled differently within the same view port.....even after I have locked it.
I am also confused about notating dims in the model space within the paper space view port vs on the paper space outside of the model space view port? Perhaps this has something to do with my issues?
Again it may be because I don't understand another function/setting impacting this well enough yet?? I have tried/used every variable in the Dimension Style Manager on the Lines, Text and Fit tabs to no avail.
I have a somewhat complex document with many layers that have similar colors. Is there some way to identify the layer of a particular element using my mouse cursor in AutoCAD WS?
View 9 Replies View RelatedI have used color to determine line widths. The plotter set-up recognizes color and assigns the appropriate line width. My new company is determining line width by using polylines. Am I behind the times? Or, is this a better way. Willing to change.
View 4 Replies View RelatedAs a part of an other recent topic (Interop 32/64 COM - Acad Mechanical),In VB.NET, how can I easily be sure to be in a Mechanical AutoCAD with every specific interfaces loaded (SymBBAuto, AcadmAuto...)?
I tried to get specific system variable like "AMVER" but this does not work.
I tried a "Try... Catch" while using "GetInterfaceObject", but this does not work at any time... sometimes I got fatal errors.I don't want to use the caption of the AutoCAD window, it is not enough reliable for me.
I'm looping trough positional representations in a assembly and I would like to determine if one of them is failing.
View 4 Replies View RelatedMy problem is I have an object polyface mesh and any point, determine which points in the mesh object polyface not?
View 5 Replies View RelatedI need to extract the XY location of a surface label. Specifically, I am trying to determine the coordinates of the first picked point in a two-point slope label. But in looking at the IAeccSurfaceSlopeLabel interface in the ActiveX documentation, I'm not seeing where this data is stored. Even for a simple surface spot elevation label (IAeccSurfaceElevationLabel) I don't see a property that stores the coordinates.
View 6 Replies View RelatedUsing the mvsetup, a colleague of mine rotated the model space in the viewport. I cannot determine what angle was used, is there an setting in the properties manager to show the rotation angle or other way to find out?
View 5 Replies View RelatedI create custom sheetmetal styles from time to time via the API. It fails when the flat pattern has issues. Is there a way to determine if the flat pattern has errors/issues so I can delete it as required?
View 3 Replies View RelatedI am looking for a way to verify what version an AutoCAD file is without opening the file. I have a customer that requests the files to be in an older version of AutoCAD and for QA purposes I would like to verify that the files we are sending out are in the correct version.
View 1 Replies View RelatedIf an assembly contains unresolved file references, when I try to open it Inventor allows me to try and resolve this with the Resolve Link dialog. But if I choose to skip all for whatever reason, once I've opened the assembly there's no easy way for me to see which sub-assembly/assemblies contain the missing reference. I have to expand folders, patterns, assemblies, etc. until I find the one with the little question mark next to it. I prefer to work with unresolved links in this way sometimes because it just makes more sense working with the model than a bunch of file paths and file names in the Resolve Link dialog. But it's nearly impossible with large assemblies where the unresolved links may be burried deep.
Is there a way to list or somehow see which assemblies contain the unresolved links once I've already opened an assembly?
Is there a way to determine the number of styles in a drawing?
View 9 Replies View Related