Unable to plot with AutoCAD Map 3d. Problem just began. Reinstalled program. Installed SP-1. AutoCAD will not plot to ANY device. Previews just fine. Printer icon behaves as if plotting. Stays at that point until plot is cancelled.
View 7 RepliesI have one workstation running Autocad LT 2007 on a windows 7 32 bit OS, and needs to print to a non plot printer, which is a Kyocera KM-4050 KX. I am unable to print to this printer through Autocad LT 2007 and recieve the following error message . . .
"\ServerNamePrinterName: This plotter configuration conanot be used for one of these reasons: The driver cannot be found, the device can not be found, or the driver has a problem. The None plot device has been substituted."
The Printer works fine with all other applications, and the rest of the users who have Autocad LT 2011 have no issue printing.
I followed the instructions in [URL] ..... and did not see my printer model in the list and was unable to load the driver from a disk.I believe the file it was looking for was .hif, which could not be found.
I also uninstalled and reinstalled the printer driver, and did some testing, so the printer works fine except for this application. According to the user the print function never worked for them in Autocad LT 2007.
how to find out using the .NET API if a plot device requires a file name when ploting?
E.g. choosing the plot to PDF device would require a file name.
my app permits to the users select multiple DWG files, inserting them into a MSHFLEXGRID.
After this the user can select a DWT file and store in a matrix (PC) all its AcadPlotConfigurations.
The user can select distinct Page Layout for each DWG file selected.
Then running the code below, each file is opened in ACAD and then printed using the specific Page Layout.
This was running very good in ACAD 2002. After migrate to ACAD 2005 only the first file is printed. The others DWG files return FALSE to the PlotToDevice command.
Is it missing some command ?Does ACAD 2005 need anything extra to run ?
Obs: the DWT Page Layouts were created for MODELs and the files to be printed are using only the model space too.
'################################
' PLOT SAMPLE
'################################
Dim PC() As AcadPlotConfiguration
Private Sub Plot_Click()
Dim Layout As AcadLayout
Dim LayoutBase As AcadLayout
Dim indice As Integer
Dim retorno As Boolean
[code].....
Two different plot settings (saved as page setups) will produce different results for exactly the same 34"x22" output. I have been bucking this problem since I started using AutoCAD C3D. I have a program to adjust the label scaling of my point labels so they are readable in both model space and layouts and when non-raster plotters are used, but now I must adapt it for other C3D labels before I can use them.
Below is my setup for plotting ANSI-D (34"x22") TIFF files at 288dpi. I have been using this plot device and setup almost exclusively since about 2001. The output is 9792 pixels x 6336 pixels which is set as a custom paper size to match my 288 dpi resolution (it is 288dpi because that is a multiple of 72dpi which is the default resolution of AutoCAD's TIFF raster output. It is 72dpi regardless of the fact that the plot scale is specified as 288 pixels = 1 unit or 288dpi). I must reset the dpi to 288 using image software so the resulting PDF will have a size of 34"x22" instead of 136"x88". You can see in the preview output I captured that their size difference cannot be attributed to these size differences. The plots are of the exact same layout showing point labels with only the page setup changed.
TIFF Plot Setup
PDF Plot Setup
TIFF Plot Output (34"x22")
PDF Plot Output (34"x22")
how to get Autodesk to address or even acknowledge this label scaling error?
Windows 7 Professional 64-bit - Service Pack 1
Intel﴾R﴿ Core﴾TM﴿ i7-3820 CPU 3.60GHz; 16 GB DDR3 Dual Channel RAM
nVidia Quadro 4000; AutoCAD Civil 3D 2013, sp1
Now I'm going to write a code that will change current plot device of the drawing and there isn't a problem here:
acPlSetVdr.SetPlotConfigurationName(acPlSet, newPrinter, "A4");
But how can I leave default paper size not "A4"? For example if there is "A3" it should stay "A3". Because if I go through each drawing I don't know what is the current paper size I just need to change the plot device becuse default has been crashed for example. But if I write "A4" each drawing will have "A4".
I have been using LT2000 and LT2006 for years. A few months back we purchased LT2013. It took me a little while to get comfortable with the workspace. Then I found the AutoCad LT Classic option. All was good.
My normal procedure with drawings is to take a screen shot, crop it in paint and paste it to ppt and save that ppt as a pdf. This method allows me to share a small portion of a detailed drawing with customers and vendors for review. I am now to a point with one particular drawing where I would like to plot to PDF. This is something I have never had an issue with using the two previous LT versions. When I go through the motions as I always have before…all I get is a blank page. Preview is blank. I am stuck and can’t seem to figure it out in 2013.
I have been making drawings mostly from objects I copy/pasted from objects in previous drawings in my company's database. I had to draw some additions and it is these objects which will not print (everything copy/pasted plots fine).
When I look at the layers window, nothing is out of the ordinary (all layers thawed, unlocked etc).
This is AutoCAD MAP 3D 2009 by the way!
I am running Windows 7 Professional 64 bit, plotting to HP 4500 DesignJet. If I attempt to plot an oversized map the plotter either spits out a blank page or says it plotted the map and no map prints. We have another machine running Vista 64 bit and Map 3D 2011 and it is able to plot just fine. Another machine is running XP and Map 2008 and can plot fine.
I have updated plotter drivers, settings, and I have tried plotting off several .pc3 configurations all ending with the same result. As of right now when I need to plot large maps I have to send an e transmit to my other machine in order to plot, which just isn't going to work.
I am new to autocad, I downloaded autocad 2013, When I tried to print/plot it always blank(white), Is there any settings I need to for print/plot?
View 1 Replies View RelatedI am unable to plot PDF files from my AutoCad 2011. Plots OK in Word etc so Windows 7 printer seems ok. Get error message : Job: - Canceled
Job ID: 8
Sheet set name:
Date and time started: 4/07/2011 11:48:32 AM
Date and time completed: 4/07/2011 11:48:33 AM
UserID: user
Profile ID: AutoCAD 2011 Prosteel Ribbon
Total sheets: 1
Sheets plotted: 0
Number of errors: 1
Number of warnings: 0
Sheet: - Canceled
File: D:ProjectsP079 - PDG Engineering for Standard Stacking ConveyorC DrawingsdwgsP079-BMSPR01-0000-SS-DR-0059 to 0066.dwg
Category name:
Page setup:
Device name: Adobe PDF_A3.pc3
Plot file path:
Paper size: A3
MESSAGE: Error : A StartDocPrinter call was not issued.
ERROR: The device has reported an unknown error.
Job: - Canceled
I`m using the AutoCad Version 2010 and since last friday I`m not able to Plot PDF datas anymore.It shows the Error "Invalid Window"..But it worked hundreds of times before in the same way.
View 3 Replies View RelatedThe product is AutoCAD 2013 Architecture. It installed fine. Typically, as part of the install routine, I go in to the Plot dialog and set the plot style table to monochrome.ctb.
However, on this particular install... something is different. When I open the screen, typcially the plot style table is set to 'none' and I then set it to monochrome.ctb. That is not the case on this one. It is defaulting to AEC Standard.stb and monochrome is not in the list.
1.jpg
I read elsewhere to run CONVERTPSTYLES at the command line. I tried that and it did work..however it does not hold the setting. If I close and restart CAD, I am right back to the AEC Standard.stb default again.
This seems to just be a problem with new drawings? If I open one from the network, it does have the monochrome.ctb setting already set.
I assumed it must have been a problem with the default in options, but I believe I have it set correctly? See below.
2.JPG
If I interpret the above correctly, the plot style table drop down box should be defaulting to 'none' ? but it does not... it defaults to AEC Standard.stb.
I have already tried a complete uninstall/Reinstall of CAD and still have the same issue.
I am unable to plot lineweight in Mtext while printing the drawing. I have checked the 'Scale Line weight' in Page Setup Manager but the Mtext is not get weighted while other entities gets lineweight when printed with the same options.
View 4 Replies View RelatedI have one drawing per file at model tab. When I need to plot a multiple page file, I use:
Print > Batch Plot.
The problem is that I have to set plot configurations ( plot style table, plot area, paper size, etc) in each file before use Batch Plot.
Now I received 722 files with a wrong Plot Style Table. For this time I change the associated *.ctb file at Plot Style folder, but I will need to associate the right *.ctb to each drawing. It's also common to have to change other properties.
I’m trying to create a plot command that reads settings in from a variable stored in a text file but its becoming muddled up somewhere.
(defun c:MYPLOT ();Setting nessesary variables...(setq fname "C:/ICT/AutoCAD_Architecture_Suite_2012/CUSTOM/TREADSTONE/PEN/MYOUTPUTDEVICE.PEN")(if(setq f(open fname "r"))(while (setq MYOUTPUTDEVICE (read-line f))(close)))(setq fname "C:/ICT/AutoCAD_Architecture_Suite_2012/CUSTOM/TREADSTONE/PEN/MYPAPERSIZE.PEN")
[code].......
I've never had to rebuild a PC for drafting until now. We are using a VERY old batch processing program called ScriptEase. However, on the rebbuilt PC, when processing a batch, AutoCAD will not prceed because it stops and says:
"Can not use None device for plotting"
How, in the plot settings, can the correct printer and paper sized be saved? I've looked all over and cannot get it to save. Under the options and Print and Plot Devices, it is there but when manually going to PLOT, it just says NONE and will not remember the default printer.
We are using AutoCAD LT 2007
I am a Mac user and new to AutoCAD. I am enrolled in a CAD class this semester and the instructor for my session is requiring Windows. Supposedly this is because AutoCAD for Mac does not allow for proper printing on their plot style setting.
I understand that I can install Bootcamp and Windows on my computer, but I'd really like to avoid that if I can. If I were to do my work on my Mac and then digitally transfer my files to a PC for printing purposes, would my files become corrupted or compromised in any way?
Where else do they keep this setting? I only have found it in Active Layout in extended dada
(entget (vlax-vla-object->ename(vla-get-activelayout (vla-get-activedocument(vlax-get-acad-object)))) '("*"))
The last pice of extended data is:
("PLOTTRANSPARENCY" (1071 . 0))
When i change it to 1
(setq layout(vla-get-activelayout (vla-get-activedocument(vlax-get-acad-object))))
(vla-getXdata layout "PLOTTRANSPARENCY" 'type 'data)
(vlax-safearray-fill data '("PLOTTRANSPARENCY" 1))
(vla-setXdata layout type data)
it stays there (extended data), but the setting in Plot dialog box doesn't change!!! And it still prints no transparency.
It takes to save the drawing and reopen it again to see the change.
The command -PLOT does not have this setting as well, so my options back to VBA or Lisp, but HOW?
I have a problem to plot thin lines and dots when Plot Transparency option is On in the Plot dialog box.
The lineweight is a half of the original. I think i have tried everything.
It shows correctly in the Plot Preview but when printed there are no dotted hatches and lines are much thinner.
Can users with a 64 bit computer share pc3's and pmp's with 32 bit users without adverse effects?
View 1 Replies View Relatedhow can i catch the plotting information (paper size and scale ... ) using plotting device??
View 9 Replies View RelatedI wanted too add a rubber sleeve onto a device I made. The sleeve would be adjustable to the size of the pole. How do I make this flexable rubber sleeve knowing the distance it can stretch?
View 8 Replies View RelatedI am unable to install AutoCad LT 2013 on my Windows 7 x64 system. Everytime I try to install I get the error message:
"The system cannot open the device or file specified.
C:UsersEricAppDataLocalTemp\_AI194B.tmpx86en-usComponentsadr2013SetupDesignReview2013.msi."
I can go to that folder and that file is there. However, if I try to run that file it then gives me errors about other missing files, that are not in that folder.
I have tried this with Multiple Logins, including the Adminstrator. I have also, completely wiped out the system and reinstalled Windows 7 from scratch.
I have set the UAC to the lowest level.I have also tried another DVD, and tried copying the files to the machine. No matter what I try I get this same message.One other thing, this is the 2013 Upgrade.
I am converting from a R14 and a digitizer to ACA2009 and a Mouse.I am not thrilled with the way the mouse interacts with the screen, accuracy, lag time? I am using a wireless optical mouse and keyboard.What is the preferred pointing device for AutoCAD?
Further more I am a slab and have no room on my desk for a mouse cord,What is the preferred wireless pointing device?
When I publish a drawing as a multipage DWFx (or PDF for that matter) with "Include Layer Information" selected, the Plot Stamp (Simple Date/Time and Text) comes out but on different layers on different layouts.
Example:
First Layout : Plotstamp resides on Layer 0
Second Layout: Plotstamp resides on Layer 3P
Third Layout: EQPT-VC
etc
Some general information:
Autodesk AutoCAD 2011 64bit
Autodesk DesignReview - 2012
Adobe Acrobat X Professional
Layer 0 Is thawed/plotable and on in all layouts, viewports all layers, viewports. It has at least one entity per layout
Is there anyway to rectify this and still use the built-in Plot Stamp?
So the firm I work at has AutoCAD 2000 and 2007. 2000 is installed on 5 out of the 7 computers, and 2007 installed on 6 of the 7 computers. 2 of the computers running just ACAD 2007 are Windows Vista, while all the other computers are Windows XP. We have an OCE TDS320 CAD Printer, an HP Wide Format Printer and a Panasonic 330 Copier/Fax/Printer. Our Problem is that When you try to plot an ACAD2007 drawing it will only plot it in color. This problem did not exist before 1/12/12.
When I select the Plot Style to print I select "monochrome.stb" which has always worked, now all of a sudden it doesnt. The only way i have found to fix this problem is to change my drawing to layer "0" which is white, so when it tries to print in color it will print black. Another Guy in the firm i work at has ACAD2007 on his computer running XP, he also has 2000 running on the same computer. When he tries to plot on ACAD2007 the same thing happens, so it is not isolated to my computer.
There is a difference though between his Plot Styles on his computer and the ones on mine. His end with .ctb, which works. It only doesnt work when he tries to print a drawing i made off of my computer. Because of this we copied his Plot Style folder for AutoCAD 2007 and installed it into the folder with all of my plot styles on my computer, replacing the ".stb" with ".ctb" That did not work at all. The last thing we tried was to copy over a file that plotted correctly, delete the drawing and draw what we needed, This also did not work. So basically we are thinking that ACAD2007 is not reading the Plot Styles correctly, or the Plot Styles are wrong or currupt.
I have several objects on various layers in model space and they are exposed through a viewport in a paperspace layout. I also have a corporate CTB plot style.
Here is my problem: If i plot the objects from model space, they all plot with the correct lineweights as defined in our corporate CTB, but when i plot them from the paperspace layout, some but not all objects plot with a heavier lineweight than what is defined in the CTB.
I thought the CTB was supposed to override any settings applied to individual objects, but more importantly, why the different results, on the same objects, depending upon the space from which they're plotted?
I have found that when I Publish, the drawing comes out shifted about 1/8" down and 1/8" left as compared to when I use Plot. Which of course is just enough to cut off the sheet border which is 1/2" from the paper edge. I am using the same Page Setup for both Publish and Plot, same drawing.
This is to an Oce TDS600, and it only happens with 15x21 paper size. All paper sizes are set to 0" border. Probably an Oce issue, but have any of you seen this before?
I recently upgraded from 2010 to 2012 and when trying to plot, using the very same page setups as before the upgrade, the quality (or resolution) of the plot is very poor and pixelated. I am using very high resolution aerial imagery. The output is not at all high resolution (totally pixelated, not presentable as professional). It seems like AutoCAD is reducing the image quality now. Is this a system variable that can be adjusted?
View 1 Replies View RelatedI have a stationing line. I've used the block PTTICL to make ticks. The ticks display perfectly. I'll run through a plot preview and the ticks show on the plot preview. I push plot go to the printer and the ticks are not plotted.
I've checked the layer. They are on a layer that should print.
I've checked the block. The block is created on a layer that should print.
I've run through a number of options regarding the alignment label properties and found "display" to be equal to "true."
Everything else plots just fine. Only the station label ticks refuse to plot. My project is fairly short so the work around was to put a poly line right on top of the tick mark.
AutoCAD Civil 3D 2013.