I have started a new project and would like to use the database table from a previous project with this one. Basically what I want to do is create a new shape file using the a previous database table so I do not have to create a whole new data base.
View 1 RepliesI have a 64-bit Windows 7 computer that we are running Civil 3D 2013. We have attempted to create a survey database but get the attached .NET error.
Repairing the .NET throught Control Panel as well as running the Microsoft .NET Repair Tool. (After repairing the .NET we would get another error shown below)We have changed the UAC (User Account Control) for Windows 7We have also tried to find any .LDB for the database and did not find any Checked the folder settings which this user is an admin on his computerWe also created a survey database from other computers which are using WindowsXP 32bit and he was not able to access the database that way either Second error:
'DbProviderFactories' section can only appear once per config file error
I have an AutoCAD file which includes 3d points and lines which represent an existing ground survey. The scheme is approx. 8km and points are spaced in a dense grid. The survey was undertaken using aerial (Lidar) methods, before being rationalised using aerial imagary to identify linear features such as kerbs, fencelines, etc, which are included as 3d polylines. Items have been grouped by the surveyors and adopt individual cad layers and linestyles, etc.
Basically, I want to incorporate all of the points and all 3d polylines into my Civil 3d Survey database in order develop a roads design.
We are currently using a networked Autocad 2012 Deployment. As each person opens the Autocad session, several "tmp" files are created in the "G:AutoCAD Support2012SupportToolPalette" directory. They remain when the session is closed and then several MORE are created. The directory itself is write protected for most users (engineers, etc) but open for the Drafstmen to be able to create new entries. I can see why they arent deleted becasue of this, but why are they thrown in there in the first place?
We had over 65,000 tmp listings this AM after examining all the directories associated with Autocad because ALL users were having problems opening and closing Autocad such as 3-4 minutes to open the app, and several minutes to close. Once they were deleted, Acad ran normally and no lags were detected.
I have just installed Map3d 2012 on a new windows 7 machine and connect to data using oracle! I have some .layer files that are stored on my server which worked perfectly in 2011! The problem I have now is when I use Load layer from the task pane I receive an message that reads..
Failed to open FDO connection
ORA-01005: Null password given: Logon denied
I can log in to my oracle database which gets rid of the error but no data is bought in! Also if I try to connect with query (polygon region on Map) from data connect (polygon region on Map) no data shown, just a red polygon where the data should appear!!
I have shp files and an external database file and I wish to merge the data from the External database to the Shp files OD table.They both have a column with entries matching so I figured I could use a Join to complete this. This is where I have run into difficulties.
I tried to import the spreadsheet using FDO but there is no XYZ data its just pure data. I added dummy XYZ data and tried again but I am unable to insert the data. the checkbox is greyed out, I select the Identity property to match the main title and it does not work.
I tried adding a new data source but I am unable to perform a join with this. right way to import the data from the excel sheet and add / merge the data to the FDO table created by the shp file.
I have imported csv files into my database but after closing the database and reopening I cannot import any more files. I can only import the events that I already brought in into the current drawing. Is this a common issue? How do you fix this?
C3D2012 SP2
Win7
Is it possible to disable PDF files from being automatically opened by adobe reader after they have been created from inventor drawings?
View 2 Replies View Relatedhow to turn off the automatic creation of log files in my drawing folder?
I have unchecked the <Options> <Open and Save> <Maintain a log file> but they just keep on appearing and manually cleaning them out is a real pain...
I am working on the AutoCAD customization and doing the same by VB.Net & C#.Net. But I just want to know the difference as mentioned below:
1. Insert Block In AutoCAD
Using VB.Net without using DataBase services..Only 1 statement is required to Insert the Block objAcadDocument.ModelSpace.InsertBlock(Required Arguments are here) Using C#.Net with DataBase services
There are many statments are there to insert only 1 block..Like Start Transaction, Lock the document, Get the Object Id Block etc...So my quetion is that when I have to use DataBase services and when not
what is the advantage of doing customization using DataBase services rather than go for wihout DataBase services.?
acad 2012 is creating ghost files on my desktop. How do I stop the creation of them?The files are greyed out and are titled "Drawing2.dwl2".
I remember having this annoyance, for me at least, a year or so ago but don't remember how I made them disappear.
Automator script to backup Smoke 2013 database and other vital files? If not, where could I find a list of those files?
View 5 Replies View RelatedI have for days now tried to export a 3d polyline from Autocad Map3d into ArcGis so that i may be able to view a height any where along the polyline. I just keep getting a height of zero.
View 4 Replies View RelatedWe're using AutoCAD LT 2009, so we of course do not have Aeccland.shx. I am aware that I do not have it. I don't particularly care that I don't have it.
AutoCAD, on the other hand, is very concerned. So concerned, in fact, that it will ask me for this file every time I open projects that involve baseplans shapes from this file. I would like to allay AutoCAD's concerns, and inform it that aeccland.shx is not necessary, and it can get along quite happily without aeccland.shx, and any other shape file. I would like to do this very much, as I am currently working on a project with 60 or more separate files I must pull information from to compile baseplans I can use.
When I import the shape file I created to map3d I can select and import individual shape files. I can not however, select all. When I do this I get an eror code.
View 3 Replies View RelatedI am working in AutoCAD map 3D 2011. From my research online, I understand it should be able to import shape files whereas normal versions cannot. I am unable to get my version to recognize the cesus tiger shape files. I am interested in the road information only. I have noticed online that that there should be a "map" or "mapping" option on my toolbar and there is not.
View 4 Replies View RelatedIf there is a way to import shape files into Autocad LT?
I have tried using the freeware converters such as Cad tools but have no way of opening the avx file, also tried Import Shape from ABC Autocad but have hit a wall there too. This made me wonder if its even possible in LT.
I managed to install the Import Shape program but it installs a bunch of files I don't think I am able to use. It gives me the following error when I run the SCR it installs. "Command: (defun LISP command is not available."
I received some drawings from a client that is missing some shape files, it looks for file names like Z.shx when opening the dwg's, I have asked and he says he has the same problems when he opens them so is unable to send these to me, the drawing seems to open fine and I can not seen anything that looks wrong.
Iv also had this in the past with fonts and it will change the font to another one but nags you for it each time I open the file so i would like to know how to stop that as well if its different to above.
I have to convert my ACAD drawing to shape files for a GIS user. I have figured out how create a polygon, point or line and add object data with the tables. I have my ACAD drawing setup to the requested coordinate system but when I send them the shape files they are telling me that they get a error in ArchGIS stating "an extent that is not consistent with the associated spatial reference information". I am using Civil 3D 2012.
View 3 Replies View RelatedI got some shp files from different sources and I tried to connect all together to a new (MAP 3d 2010) .dwg file.
Besides the two different positions, the size of one is too bigger than the other. However, when I use mapdist command, the measurement are practically the same.
I figure out that I can deal with some of those shp files when I assign LL coordinate system, but other files run when I assign UTM coordinate system. For example, using buffer command.
There is no defined coordinate system in any of the shp files I have.
What should I do to overlay all features on the fly?
When I import my shape file into my drawing I am not getting the text file to come in with the roads.
View 3 Replies View RelatedIn Civil 3D, what is the best method to import ESIR GIS shapefiles or geodatabases into an existing CAD drawing?
It is possible to export shape files from GIS to CAD, but how within Civil 3D, are shape files imported into a drawing?
I have a shape file containing property boundaries with ownership names and parcel numbers. I have a cad map of town where there is a creek running thru the part of town I am working on. How to get a print out, or map of all the parcels that this creek is running thru? My main goal is to create a list of property owners adjacent to this creek. I think I have all the data, but not sure how to use it.
View 1 Replies View RelatedI am using map 3d 2011 and i am running into issues with the use of multi-leaders. I have a dwg with a few shape files in it and I have added multileaders to the dwg. When I save, close and then reopen the file the multileaders show up for a brief second during the loading process but then they disappear. All my settings are correct (layers, visibility, scales) as far as the leaders go but I can't figure out what the heck is going on. I tried adding another, select similar and only the one shows up that I just added. Saved the file and reopened. Same thing, the leader I just added shows up with the others for a brief second and then "poof" gone!!!
View 1 Replies View RelatedI just upgraded to Map 3d 2014 from 2010 and cannot figure out how to control the transparency for shapefiles. I thought that it was a glitch with the upgrade so installed the servepack and still no luck. So when I go to edit style and then to the style polygon dialouge there is no control for the foreground and no control for the trasparency, there is just a the word tranparency option with "0" but no way change it. I have installed 3d on 2 computers and the same on both.
View 5 Replies View RelatedI need to convert shapefiles to a pretty old version of dxf. Shapefiles is a file format used in geographical systems.
[URL].......
For example a shapefile could contain points, lines or polygons, and attributes for each point/line/whatever.
Now I need to convert shapefiles to an old version of the dxf format, I don't even know exactly what version so I'll have to find out by trial and error I guess. (But a gut feeling says somewhere in the 90's.)
Luckily there are tools to convert shapefiles to the modern versions of DXF, but where do I go from there?
I'm new to working with GIS data imported into Civil 3d as shape files. I'm working on setting up base drawings for a new project area and I have a lot of data displayed as polygons with attributes. This is nice but I would like to be able to copy these to polylines on layers that I can have a little more freedom to work with.
For example the polygon boundaries are not exactly the boundaries that I need to show and editing the borders would be nice. Is there a better alternative to tracing the polygon boundaries? I have noticed when I extract feature geometry for line strings I get a polyIine I can use but the polygons' extracted geometry is a Mpolygon with solid fill.
Turning on / off a shape files layer on viewport, I couldn't figure out why turning off a shape file layer in a particular viewport (attached) does turn it off in all other viewports.
View 5 Replies View RelatedI was given a job where i need to create a surface from a gis file. have been messing with my civ 3d 2013 a little bit and have been able to get a surface comprised of a bunch of polylines to appear (not a true surface). I will need to create profiles so i need a true surface. I downloaded a compressed shape file from the county and need to know how to insert this into a drawing and build a surface using my own surface style.
The files i have to work with:
.dbf
.idx
.prj
.sbn
.sbx
"autocad shape source"
.shp
"autocad complied shape"
I have some shape files that data connected to my drawings and shown as a solid color polygon. I set the foreground transparency 40% in order to see the USGS map on the background. But When I print out, it print out as a solid color, not transparency.
How to work with a solid color shape files so I can see the USGS map when it prints out.
At present I am needing to export a large number of ESRI shape files from AC Map 2011 for use in a GIS application. I know that Map 3D has the export features but after completing 50 exports its does get repetitive and is time consuming.
Is there any way of specifying the name or names of the layers you wish to export and apply attributes to them without having to use the Map 3D Export process?