I know it can be done but have had little luck finding how. I need to Convert GIS features to an engineering friendly cad file and I'm stumped at the point of assigning blocks to the points.
Also another issue is that I would often need to assign those blocks based on field values. Noob questions I know but it's my one critical step I've not sorted out.
Is there a way to create a block with attributtes that automatically complete x, y, z, lat, long for the insertion point of the block?
I am trying to complete text in paperspace that will automatically fill in the lat long of a point in model space without using a table. I have tried field insertion with reference to a cogo point, but it doesn't give options for position on a cogo point. If I pick a block with attributes, it will let me pick any attributes, and x,y position for the block.
Cogo points show all the information I need to propagate in the properties....but how do I get that to translate into the text using fields or some other method?
Dell Precision T3600 - Windows 7 64-bit
NVIDIA Quadro 600
Intel(R) Xenon(R) CPU E5-1607 0 @ 3.00GHz 3.00GHz
8 GB ram - Two 1TB raid
How do I go about getting a custom scaled block at 1''=20' to scale (back to a 1 to 1 scale).
View 2 Replies View RelatedAll block containing Circle, Spline or Ellipse have Linetype Reset when they are scaled in a drawing who contain more that 1 ViewPort. (tested with CAD 2010 -> 2014)
View 9 Replies View RelatedGiven a feature line/polyline(FL/PL) and a series of points directly on the FL/PL, how can you assign the elevations of the points to the vertices of the FL/PL?
Without using a surface?
If i do a text box and put say 16 point text in it, then (as part of a group or folder) scale that text box (say 200%), i get irregular point sizes.
If i use the text tool and select the enlarged copy, the character palette tells me i have 16 point copy still (even though it plainly isnt).
If its a single point size and not larger headings, i can use the move tool and it will tell me the faux size - but thats no work around.
So in short, how do i scale (using the transform tool) copy and it enlarge the actual point size of the copy.
is it possible to create a block so that the base point is the only snap point on the block?
In other words supose I have a block of a simple rectangle with the base point in the center.
If I try to snap to the block, I will be able to snap to all the corners, but not the base point. I know that i can put a point at the base point, but can I turn off the snap to the corners (just for the block) in other words, have an object that is unsnapable to without turning the snap mode off.
When I import my points (.txt), all of the points go to whatever layer is current. They don't go into their repective layers anymore.
Also, for surface, the surface doesn't even show up now. This is the 1st time with this problem too. I created the surface, assigned the point group and still no contours.
Also, out of curiosity, during the point import stage....what is "assign offset to point identifiers"? does this mean, if points are right on top of each other, it will be automatically offset to read?
HP Compaq 8100 Elite
Win 7 Pro SP1 - 64Bit
8GB RAM
i7 860 @ 2.80 GHZ
AutoCad Civil 3d 2012 SP1
What I wish to do is to assign a set of points a sequence of point numbers (or custom properties) of my choosing. For example, I have the following points:
100
102
104
105
107
I wish to assign point 100 -> 1000, 105 to 1001, 107 to 1002, 104 -> 1003, and 102 ->1004. Basically, I am looking for a command or utility that implements the "TCOUNT" (using select-order) command, but for Cogo points instead of text. The renumber points command appears to only work with offsets, and does not eliminate gaps. I can sequence the points if I select the points I want, then copy them -> set duplicate points to sequence from the range I choose, but this does not allow for reordering of point numbers. I tried individually selecting them in the order I wanted, but didn't change the order in which they were numbered.
Alternatively, I can leave the point numbers the same, and assign a user defined property that I can use to sequence the points in the order of my choosing. However, I'm not sure how to go about assigning the sequence I wish short of typing in each value individually; obviously non-ideal.
A third possibility that presented itself to me was to create new, correctly sequenced points that overlap exactly with the old ones, and then somehow merge the two sets together. Would there be a way to merge the old points and the new ones based on the fact that the two points have the same X-Y coordinates? Preferably done in CAD itself; the last resort would be to export both sets of points out to excel, then do some fancy manipulation in excel, then reimport into CAD.
I render in 3ds Max and output .exr files. Whenever I open them the dialoge box pops up to ask me if I'd like to assign a working profile or assign a specific profile. Is there some way that I can tell PS to just always assign a working profile so I don't always have to go through that dialoge box?
View 13 Replies View RelatedI am trying to assign a plotstyle to attribute while creating a block. First I create the block, then I insert the Blockref, in that process I have errors assigining a plotstyle to the attribute. (I have also tried to assign the plotstyle while creating the block and attribute with poor results.)
Here is my attempt to do this:
For Each objId As ObjectId In blkTblR
Dim obj As DBObject = objId.GetObject(OpenMode.ForRead)
If TypeOf obj Is AttributeDefinition Then
[Code].....
I have a bunch (hundreds, so manual input not an option) of X,Y points without elevation data that I would like to import into a DWG and assign an elevation that is based on an existing surface object. Is there a way to do this for a point file? The command for inserting individual points would be the "Create points - Surface > Random" but I don't see a way to do this in a batch type method where i have my PNE formatted input file to just move the points to sit on the existing surface.
View 2 Replies View RelatedAfter all this time is there a way to assign layers to different objects with a block? Perhaps using Visibility states or Lookups?
As an example:
I have a dynamic block with a door swing and text. As I increase the size of the door the text changes to reflect door size. The objects are all on the 0 Layer. When I insert the block I can assign a 'Text A' Layer to the text and a 'Door A' layer to the door. So when I switch layer states around I will either see the door, the text or both. Then I move to the second floor which has been stacked on the first floor. I insert my DB and assign layers 'Text B' and 'Door B' respectively to the text and door.
Finally when I go to my layer states I either select 'First Floor' or 'Second Floor' and the respective blocks appear depending on the layer state.
I'm inserting blocks into my drawing and the block has a basepoint and a 0,0,0 point. The CAD guy who usually works with me is off today but he has a keyboard method of switching between the 2 points when inserting the block.
Its a fairly straight forward thing on his keyboard, nothing he has set up but standard in autocad.
I've had a try hitting a few keyboard buttons this morning but can't seem to do it.
If it is possible to assign multiple attributes to a single line text within a block, and be prompted for them upon insertion.
View 3 Replies View RelatedI have a need to send files saved from Inventor.dwg to AutoCAD.dwg to suppliers, however due to the quantity of files "size", I need to purge them in Autocad before I e-mail. The problem I have is that my template Inventor.dwg is 1 mg due to Sketch Symbols, plus added file size for the views etc. When I get to Autocad to purge them, my Sketch Symbols and Title Block is on the "0" Layer. I have to select everything that is on the "0" Layer and change the layer to a different layer to start a LISP routine that does a, Erase All, Purge All, to get my file size down. I have not found a way to change the layer that Sketch Symbols are created on or reside on by default or Title Block either.
Any way to do this Inside the Sketch Symbols, inside the Title Block, using the styles, anything?
I am just now going through a iLogic course and read that Layers can be hidden. Can iLogic be used to change the layer of "SketchSymbols" or "TitleBlocks" and or used to purge all Sketch Symbols during the SaveAs to Autocad.dwg process?
We're using C3D 2013 SP2. The survey company we use uses point styles to show the blocks. Say they shoot a catchbasin. Instead of inserting the block, the point shows up as the block.
I did a field check & needed to insert a missed CB. When I inserted the block, the other points that were CBs disappeared. I had to insert the block, copy it the clipboard, undo the insertion & then paste the block in. It did this on other drawings & other blocks.
my problem is whenever i make a new block a stretch point appears even if its not a dynamic block . also its not a stretch point, because when i click on it, it just move the block , and it always appear on the coordinates 0,0 it cause me a problem when I insert the block , autocad use this point as a base point , and its very far from the real block .
View 1 Replies View RelatedI am learning autolips and i found a problem that i can´t solved.
(vl-load-com)(defun c:pmb ( / ss ent pt )(prompt "
selec block : ")(setq ss (ssget '((0 . "INSERT")))) (setq ent (ssname ss 0)), (setq pt (cdr (assoc 10 (entget ent)))) (command "point" pt))
wich this code you select one block and insert one point at insert point´s block.
which this other code yo select all block and insert all point.... but in one block
(vl-load-com) (defun c:pmb11 ( / sele cod bloque nbloque lista pt ) (prompt "
block: ") (setq sele (ssget ( List'(0 . "INSERT"))) Cod 0 )cod (1+ cod) (repeat (sslength sele) (setq bloque (ssname sele cod)) (setq pt (cdr (assoc 10 ( entget bloque)))) (command "punto" pt) );repeat )
I want to move the base point of a block in the block editor. However, when I move it, the block moves accordingly in the drawing.
How can i move the base point in the editor, so that the block stays at the same position in the drawing.
Standard sheet number option gives you only 1, 2 and so on.
I want A1 where A does not change and 1 changes depending on sheet number.
Is there a way to have cad automatically create a survey point when a surface point is added manually?
Civil 3D 2013
Windows 7 64-bit
Inteel 2.40 GHz 8 GB RAM
Dell T7600
While in sketch mode, while in a part, how do I dimension a new feature to the mid point of the surface?
In the example I've attached, I am wanting to dimension the holes around the midpoint of the surface, without stopping what I'm doing, drawing a construction line, then dimensioning to the construction line?
I have a problem with adding new points to existing opening.
I tried to use the method HoleCenterPoints.Add (??), But despite the lack of generating an error points are not added.
presenting a brief example of this functionality.
Is there a way to convert a feature line elevation point to PI?
My objective here is to delete all the elevation points except one. It would be time consuming to pick each elevation point and delete them individually (in this case there are about 15 but sometimes there are more). I want to use the delete all option but keep one one of them. If I can convert that one into a PI I could then quickly delete the remaining elevation points.
I see that the Point Cloud Feature Extraction is now part of the Productivity Tools for Civil 3d 2012. Are these tools available in 2013? I am not seeing them anywhere. It seems goofy that there would be more tools available for the old release - what's the incentive to make the switch? Would you expect they will be available for 2013 sometime soon? I'm not complaining, I really like 2012
View 4 Replies View RelatedHow can I automatically get point coordinates and show it in drawing. For example I have 100 points and I need to write x and y coordinates right next to the point. (not in table or somewhere else).I guess I need a plugin or smth?
View 3 Replies View RelatedIs there any way to increase the size of the marker that shows up on the plan view when you select a PI in the elevation editor? It is so small that if I have the feature line selected I can't see the marker over the highlighted line. I generally have to zoom to a PI so I can see where I am.
View 6 Replies View RelatedC3D 2012
I want to set and Elevation Point (not a PI Point) along a feature line by entering the grade from the previous point. Currently the "Set Elevation Point" command only allows entering an elevations or getting an elevation from the surface. I know I can set an elevation point and then use the "quick elevation editor" to adjust the grade, but I don't want to go through the extra step.
I want to navigate along my feature line, viewing which point is screen is the current point at the grid.
My feature line shows its points with blue circle & square grips and the current point is showed by a green circle.
The problem is the zoom level, Grips have always the same size but circular green indicator does not.
You can only view this last at a very detailed zoom.
I'd like to have a "big" arrow or something similar.The problem is the great difficulty to identify points....
Civil 3D (2013)
trying to insert point instead of block.
(setq blok (entget (car (entsel))))
(setq point (cdr (assoc 10 blok)))
(setq XX (rtos (car point) 2 20)) ;; x koordinata bloka
(setq YY (rtos (cadr point) 2 20)) ;; y koordinata bloka
(setq ZZ (rtos (caddr point) 2 20)) ;; z koordinata bloka
(command "point" xx,yy,zz) is not working
!xx="5582453.414999999" but when i (atoi xx) i get 5582453 no dedimals...
how to create valid insertation point from xx, yy and zz?