I am attempting to import HEC-RAS data into AutoCAD Map 3D 2013 (unsuccessfully). The .sdf file created from HEC is not the same file format used in ACAD. Is there any way to import a water surface?
View 1 Replieswhen I import PNEZD format .csv using import wizard the coordinates get transformed. all points are shifted about 20' in northing and 5 feet in easting. I have to use the import wizard w/ survey database in order to process linework codes.
View 5 Replies View RelatedI am an archaeologist working with survey equipment and Map3D for a few years but now I have the following problem.
When I import the shapefiles created in my leica/topcon equipment into Map3D (mapimport) there is the possibility to select which attributes are going to be imported with an import profile file (.ipf).
How do I create the above and save it so that I do not have to go through the same process again?
I'm in the process of evaluating several video editing programs. So far I've used AVS Video Editor, Cyberlink Power Director and Adobe Premiere.With each program I've spent 30 minutes making a quick demo video to see how intuitive it is and how well it performs. Today I downloaded Corel Visual Studio and decided to give it a go.
I've run into a problem straight away.I've tried to import raw avi files.So I'm using the "Select Import Source Folders" screen.When I navigate to the folder containing the files the OK button is greyed out and won't work.It's greyed out all of the time.
I receive an "Import failed" message when trying to import my iPhoto library to my trial version of PE11. I am running Mac OS X 10.7.5 and using iPhoto 11. I have tried 4 or 5 times now with the same result.
View 3 Replies View RelatedThe usual import menue has the options for importing on the right hand side. My system is now showing an import dialouge box and the import dialouge on the right is greyed out. How do I get back to the standard import screen.
View 2 Replies View RelatedThis issue occured shortly after update to 4.2, but not directly after. I am using windows 8.
The issue that occurs is after importing images they are adjusted automatically to develop module cross process 1. After dealing with this annoyance for a bit of time I realized that I can not even "RESET ALL" the images to delete the adjustment. In delving into other images that have been in my database for quite some time, I have tried to "RESET ALL", which resets images to CROSS PROCESS 1. I have never set import to automatically adjust.
I can tell you cannot Gateway Import from a drive that is Read-Only. The clip seems to work, it just says pending render, of course when you import a large number of files it always says pending render. Unfortunately it never actually finishes pending render, and will list as failed in Backburner.
So you can for instance think you have relinked an entire timeline and start doing a fair amount of work on it, but you will then be unable to send this large timeline to your flame like you think.
There is no god damned reason it should allow you to gateway import something that you cannot actually gateway import. All it would need to do is check if the drive is read only before it does it and give you an error message IN THE APPLICATION. Rather than everything looking fine, but then making you go tease the meaning out of this from backburner:
smk001 1896942624 swBIOSubJobServer.C:298 01/21/12:18:14:05.450 1896942624 swBIOAdapter.C:403 01/21/12:18:14:06.504 Cannot process tasks 0... in /var/tmp/WireJob/SubJob0.
Read-only file system on processing S+W server..The fact that the color correct house had randomly given me an NTFS drive this time didn't occur to me for quite awhile, since the last two were both macOS.
I just upgraded from LR3.6 to 4.0. When trying to import images the import module freezes for a few minutes and then displays the import screen. However, when selecting a source the program freezes again and eventually crashes.
I had the same issue when upgrading to 3.6 some time ago and then found that disabling some USB controllers solved the problem. This works for LR4 as well. As I don't need all USB connections this is a workable solution, however, disabling controllers should not be necessary to run a program.
System is an Acer Aspire 7811 64 bits w/ Intel i7, Win 7 Home Premium, 8 GB internal mem and no external drives.
I'm using LR4 with a Canon camera setup (Wind 7 Ultimate). I've got the auto import setting all configured with an incoming folder and destination. The app recognizes when an image is put in incoming folder and in fact it moves it to the destination folder. What is really annoying is that it leaves me at the import settings dialog and then I have to make all these choices as I would if I were manually importing.
Shouldn't the images be places in the desination folder and some view of that image be displayed in LR? It could be the folder view or ideally I want to see the last image imported at 1:1 size so I can review it and see if I want to take another shot? Maybe there is some flag I've got set incorrectly.
I use Auto Import to import my RAW files. Each time LR imports my files the Previous Import count number increases. Is there a way to reset this count so it shows a true reflection of the photos from my previous import session?
Correct me if I'm wrong but if you manually import files the Previous Import count number resets itself automatically. I've Googled this problem & this question has been asked before - all users were utilising Auto Import.
I'm trying to import photos into LR3.3, and the thumbnails are grayed out, as is the import button. The photos come from two other cameras -- one Canon Elf, the other I'm not sure. I received them through dropbox, and they open fine with Bridge and Photoshop CS4.
View 4 Replies View RelatedI have some problem with import SDF to dwg. Geometry in SDF is curve with mixed linear and arc segments.
But the result is not my expected result. (see image below) . All arc segments was imported not correctly.
I'm expecting my data is correctly in the sdf files, but some import mechanism not work properly.
When I make connection through FDO it's work ok.
I am using AutoCAD LT and I have drawn up something that we were hoping on putting in out GIS system (ArcGIS).
I have been told that my dwg file is not importing into the program. We have tried many conversion programs normally used and it is not working.
Is AutoCAD LT compatible with GIS?
Im pretty new to this and what i want to do isnt that difficult im sure but i cant work it out
I have my good almost complete Dwg which is my finished product
But now ive had to go collect more data and I need to add it to my good DWG
I isolated my new information, it is in its own dwg, now i need to get that dwg info into my main dwg
I tried import but doesnt seem to be that straight formward,
How do I import a DWG file into AutoCad 3D?
View 2 Replies View RelatedI cannot import any files from my trimble handheld???
View 4 Replies View RelatedI am trying to export my SSA pipes using XML and import them back into C3D 2012. Everything looks ok, but my HGL and EGL lines do not appear when I turn them on in my pipe style. Is there a way to get these lines on in my C3D profile without hand drawing them in?
View 2 Replies View Relatedhow to use SSA 2011 standalone version (We're still using 2011 C3D here). I already have my catchments, flow paths, and impervious areas drawn with polylines in separate C3D DWGs. The SSA User Manual says that I can import elements from DWGs and that's what I'm trying to do. But SSA keeps saying that it's unable to read the DWG files. I closed C3D, so they are not open elsewhere. I've restarted SSA multiple times. I've tried to import 4 different DWGs so far and the only one that works is the "topo" drawing with the ground contours. It says it can't read the other ones.
My goal here is to use SSA to make a SWMM model of a storm sewer line. In the past, I've input the data to SWMM manually after calculating it with C3D. I was hoping that SSA would automate alot of that work for me. Should I pursue this effort or just punt now and go back to doing it manually before my project budget is blown?
I have a DXF file that was created by a PDF to DXF converter. The image is a portion of a land survey. I would like to adjust autocad dimensions to equal the dimensions of the original survey. I have played with the scale command but am not getting it right.
View 9 Replies View RelatedI have opened a drawing template with titleblock in already and then Xref'd my .dwg into it...
Now, I want to make a key of some of the blocks in the dwg, but no blocks have been imported to current dwg.
How do I import them?
I'd rather do this in one go rather than individually (around 20 blocks).
I created a fbk with trimble business center. The fbk is all coordinates. C3D 2012 implys this fbk is all control points.
Is there a way to import a fbk so that c3d reads the points as non-control points?
Is there a way to change the points attributes to non-control?
Is there a toggle in C3D so I can edit multiple points before regenerating the network?
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
Well my question in details is after making a detailed plan in Autocad, do import the plans to 3d max or make the 3d model on autocad. if i have to import it 3d max how do i make the plan on 3d max come to life. do i use the plans as reference?
View 9 Replies View RelatedIs there a way to import .sid photos to AutoCAD 2011?
View 1 Replies View RelatedI need a solution how to convert SDF line features to DWG, where only one feature converted to DWG and DWG is named after feature ID. So if i have SDF file where are 3 featured( ID's are 1,2,3) and i want to convert those features to three different DWG files(one feature per DWG):1.dwg, 2.dwg etc.
View 3 Replies View RelatedI want to import a csv file into map3D and set the layers to which the blocks with attributes are inserted on. Using
Click Home tab > Data panel > Import From Files > mapimport.
Problem is, when I do this, I do not get the dialog that the help file says I should, like a place to define an insert layer or schema. All I get is the plain dialog that asks for formatting (file format such as autodesk up loadable file), Z unit, Coordinate system, and create block.
I also want to export the attribute data into a survey point file.
I have been trying to export an autocad sewer map and import it into gis. I dont know the best way to go about this and bring along some intelligence to gis.
This autocad dwg has no real intelligence in it.I can make shp files in autocad, that seem to work of for lines, I can do a data extraction for points and texts and import the spread sheets, that works too. I want to minimize the amount of editing we will need to do to the new map in gis by importing the line sizes, pipe type from cad.
I want to simplify the updating process also.
Possible to run the 'import .xml structure' routine for an assembly BOM using either iLogic or VB?? I'm trying to replicate the Import button at the bottom of the BOM screen....
View 5 Replies View RelatedI'm using C3D 2014. I created a pipe network, exported it to Hydraflow Storm Sewer, perfermed an analysis, and have HGL/flow data. When trying to import the .STM file, nothing happens. Here's what it does:
1) Import .STM into a Blank/New Drawing -> Creates a pipe network with correct IE, Size, and HGL/Flow Data
2) Import .STM into design drawing -> Choose to Update Network -> No change in network (IE, HGL, etc.)
3) Import .STM into design drawing -> Choose to Create a New Network -> Does not create a new network
I've tried closing C3D, and checking, still no change.
I have the attributes and units I want mapped between the shp file and the import wizard but everthing still imports with default values. (like pipe size or elevation.)
The only thing that is correct is the location. I see a few people have reported this but there aren't any solutions.
I am trying to import a DGM file into Civil 3D.I do this by adding a DGM file to a surface through prospector>surfaces>surface>definition>dgm files,
however the problem I am having is that it defaults to DEM file types which through research I have found out is our american counterparts version of the DGM.