AutoCAD LT :: Lines Are White Although They Should Be Red
May 19, 2011
I have encountered a following anomality in AutoCAD LT 2011 with W7 64-bit operating system. Graphics card is Nvidia Quadro FX 380 with 265.70 drivers. The problem is that all red lines apper white in the model ie. layer tells that the line is red but it appears white.
This anomality has happened in multiple dwg's. There is no clear logic why or when this happens. When AutoCAD has started situation seems to be normal (red lines are red) for a while. After a while every red line turns white. This color changing does not concern dimensions, only lines and polylines.
View 9 Replies
ADVERTISEMENT
Sep 23, 2012
I would like to draw parts in 3d view which look very basic, i.e. out of a book.
Example:
white block with black lines so you can see it is 3d.background should also be white.
How do i set autocad (2012/2013) to do this. I would like the model space to be the same and not just for printing.
View 6 Replies
View Related
Jan 26, 2012
When I work in modelspace, the lines on layer 0 turn white after I have done some text editing and then panned away. The only way to get them back to default colors is to switch to paperspace and then come back to modelspace. It is only changing the display color on the monitor. The colors are still set in the layer controls. I am using Architecture 2009.
View 7 Replies
View Related
Oct 22, 2012
Everytime I print a drawing anyting done in white comes out fuzzy/doubled up. (dwg) in autocad 2010
How to sort this out, I have never had this issue before.
View 4 Replies
View Related
Aug 14, 2013
I'm new to Map 3D and not to Civil 3D. I connected to a roads and streams shp file from a ArcGIS directory. Everything came in great and I even was able to get everything named all at once from the attibute directory. The problem is that the features seem to only plot in the colors that I see them as. If I change them all to black, then I see can't see them at all. I have been spening the past 3 hours trying to get them to jus plot black. We also have to stick with stb plot styles in our department.
View 3 Replies
View Related
May 4, 2012
when I am working on a large drawing and/or pasting as a block, all the grey lines (colour 8) turn to white. When I select a grey line, it flicks back to grey, but de-select, and it's white again.
If I toggle on hardware acceleration, the problem is fixed for a short while, and also if I turn it off, it is fixed for a short while, and also if I save, close and re-open it's good untill I paste a block....
I suspect it may be because of my setup and an un tested graphics card:
Windows 7 64 bit Ultimate - running through bootcamp on a macbook pro
Autocad 2012 Lt
Machine Configuration
---------------------
Processor Speed : 2.2 GHz
RAM : 8103 MB
3D Device
---------
Name : AMD Radeon HD 6750M
Manufacturer : AMD
Chip set : Radeon HD 6750M
Memory : 707 MB
Driver : 8.17.0010.1063
Your machine contains a 3D Device that is not certified.
View 1 Replies
View Related
Apr 10, 2013
I'm working as a Typograf. I've a problem with the new Photoshop CS6 and flattened PDF 1.3 After opening the PDF File in Photoshop we see white lines. The page is cut in many tiles.The same PDF open in Photoshop CS5.1 the white lines are not here.
Is this a bug in CS6 or are there some Preferences to change on my CS6?
View 6 Replies
View Related
May 5, 2013
Im trying to get rid of the black and white lines in this picture .
View 2 Replies
View Related
May 1, 2013
how do i get rid of black and white lines in this pic
View 9 Replies
View Related
May 10, 2013
swatch that I have created in illustrator. Once the swatch is applied as a fill there is a white line surrounding the original pattern. I have read other blog posts about the issue that state that the lines are just on screen and dissapear when you export as a PDF and when you print. I printed the design today at three different scales (100%, 40%, 20%) and all showed a white line but only on the horizontal axis. Both horizontal and vertical lines are visible when exported as a PDF. The original design is vector.
Here is a screen shot of the design from my computer:
Here is a photo of what the design looked printed (notice that the white lines are ony visible on the vertical axis):
View 5 Replies
View Related
Dec 18, 2011
How i can remove this lines Because when im zooming in picture very closely they appear and i cant see pixels.
View 2 Replies
View Related
Oct 17, 2013
I've tried everything I could find, but still the white lines and fuzziness around each of the microphones remains.
View 2 Replies
View Related
Jan 17, 2013
When I trace an image in CorelDRAW (v15), I get of course a banding of colors, but unfortunately the regions with different colors are displayed with very thin white lines as borders. This look is retained when published to pdf. How can I get rid of these white borders?
I attach a photo for you to see ...
View 14 Replies
View Related
Feb 20, 2009
I just created an image for our website in Photoshop. When I put it on the page, it has white lines on both sides.
View 1 Replies
View Related
Oct 12, 2004
I have attached a photo for an example. Please advise me on how I can have meshlike lines on my images.
View 3 Replies
View Related
Feb 5, 2013
I designed a vector in Adobe Illustrator CS6, but when saved as an .eps file, white vertical lines appear in my gradient.
What is happening? I've tried rasterizing the vector at 300 PPI with anti-aliasing, but the edges look jagged (but I really want to keep it as a vector anyway)
I don't know whether it's relevant, but I'm using process colours (but that's only because I couldn't get spot colours to work properly).
View 13 Replies
View Related
Mar 17, 2014
When a pdf is taken from illustrator, white lines appears on images. How can be avoided it?
I use illustrator cs5. It occures mostly on the cover pages of brochures which contains images, texts and some effects such as drop shadow etc.
View 4 Replies
View Related
Sep 13, 2013
I keep getting a white outlined box around type in my Illustrator artwork.It’s a simple logo design with a gradient circle with an S on top.
Text is converted to curves.Text and circle gradient are on different layers.Colors are CMYK. Not spot.Looks fine in Illustrator, Photoshop and InDesign but shows up when exported or printed to Acrobat.Also shows up in MSWord 2010 and 2013.Exporting artwork to EPS, BMP, EMF, TIF, JPG, all produce the same result.Flattening the artwork doesn’t fix the issue.Having this issue with both Illustrator CS6 and CC.
View 8 Replies
View Related
May 24, 2013
I am getting white lines around anything with a drop shadow or outer glow after flattening the transparency in Illustrator CS6. The only thing I have found that remedies this is to rasterize all objects with effects. Is there another way with out having to rasterize the transparencies?
View 8 Replies
View Related
Nov 30, 2013
I just started using PS CC (Mac, v14.1.2) and tried out Photomerge with a set of 40 (4 rows, 10 cols) raw images (Pentax PEF format), resulting in a 0.3 gigapixel image.
When I have them stitched by Photomerge, I see fine white lines at the merge points.
I had enabled all 3 options (blend images together, vignette removal, geometric distortion correction), using cylindrical layout.
When I first convert the PEFs to TIFFs and use Photomerge with the same options, there are no such white lines.
An example of the bad output:
These unwanted lines are, of course, at the edges where the images are getting joined.
Also, when using only a few images (2x2 or 3x3, or even 4x5), I do not get this effect.
I noticed that when using less images, the blend masks' edges are not straight - but they are when I see this issue. This suggests that at some point the merge operation gets overwhelmed and switches to a simpler algorithm, which in turn has this "bug" with RAW images, apparently.
Is this a known issue, and is there a way to get this working right with this many RAW/PEF images?
View 2 Replies
View Related
Jan 19, 2008
i have seen some concept drawings JUST DRAWINGS where the pen lines n stuff have been turned into white and the background has been turned into black its sort of like a blackborad and chalk effect and it looks really good for presentational ideas... can anyone possibley tell me how i can achieve this myself if i were to scan in my own drawings?
View 1 Replies
View Related
Jun 11, 2012
I can change the dark color in the border to any color I want using the stroke color. But I can not change what appears to be white, the area surrounding the darker color, in the border, to any other color. If I change the fill color it changes the gold colored area. All I want is to change the white lines in the border area.
View 3 Replies
View Related
Jul 1, 2012
This is my deconstructed crest logo, all pieces taken apart. I tried to find the source of the problem but it doesn't seem to be anything that I can track.
This problem ocurrs (the white lines on the "body" and on the two "wings") only when I use Save for Web with the GIF, JPEG and PNG options. If I use the WBMP, SWF, or SVG options then the white lines do not appear. They also do not appear if I use the regular Save As, or if I export to PNG, JPEG, etc.
The black forms are just shapes with black fills (no strokes) on them - so there is no reason that I can find for this happening.
View 1 Replies
View Related
Sep 19, 2012
I'm trying to create a compound path in order to mask off some bits and create letters, but there seems to be some kind of overlap and its leaving a white line where there shouldn't be one. Its all set up to snap-to and both shapes are perfectly in line, but its still leaving this white border.
The top of each letter is basically just 2 semi circles, the diameter being where the white line is. the lines are still visible on low-res monitors...
how to get rid of this line or if it will even print?
View 4 Replies
View Related
Apr 3, 2013
I used trace to do a trace of my image. I then used live paint to paint chunks of it. When I hovered over each bit, it would come up with a thick pink line and would fill in that line. So all was going well, I got everything the colour I wanted it, etc. I tried to export my image to a PDF and the purple lines that were so useful to me when I was doing live paint still showed up, but showed up as a white outline. I read forums and tried everything-deselected the keep ability to edit in illustrator and create acrobat layers from top level layers. But every time I try to open it in preview on the mac, the purple lines are still there. I can "click off of them" within illustrator, ie-select somewhere else on the page and it makes them go away, but even if they aren't showing up when I save it, they still show up on preview. I can't print it out like it is now!
View 8 Replies
View Related
Jul 27, 2012
I'm a furniture maker in Japan, and usually take photos of my work on the road next to my shop. I like the texture of the blacktop. Using Gimp, I'm working up the learning curve, and don't know how to remove the white lines and dirt at the upper corners, and extend the pavement to cover it. I'm hopeful that with Gimp, it can be accomplished.
Attached File(s) rockingchair1.jpg (214.16K)
View 4 Replies
View Related
Mar 2, 2013
I am getting horizontal white lines one inch apart when I print an Ai file
View 13 Replies
View Related
Nov 27, 2013
I Keep having this reoccuring problem today - white lines keep appearing attatched to certain & all layers in photoshop files that I have, the only solution that seems to get rid of them is to put a mask on the layer and mask the line away, these are appearing on text, smart objects & rastersized layers.
They were not there when I previously saved the file and they should not be there now, I then went to open another file I had and white lines started to appear on the files. This is really frustrating because some of the website documents have alot of layers. I have attatched an example below, they only appear to be 1 pixel and can range up to 2500pixels wide and they overlap making the line look thicker sometimes.
View 9 Replies
View Related
Oct 6, 2013
Just grabbed Scott's book from amazon and can't wait to get a better understanding about some of the tools I've been using. In the meantime I just noticed that I have some white trails or fine lines in an image I'm working on that appear after I have been moving things around and deleting sections etc.
It's no problem on a little image like this to run around with the brush to tidy it up and then fill white/transparent, but I'm wondering if there is there a setting or an order of working that avoids making the lines in the first place?I have filled the background in black to show the trails...
View 9 Replies
View Related
Feb 17, 2014
I recently invested in CS6 Production Premium and I've just tested legacy support by saving an Illustrator CS6 image in CS4 format.
The image contains a number of semi-transparent gradient meshes used for highlights.
Having loaded the saved CS4 .ai file in CS6, white lines appear along my semi-transparent gradient meshes (see the attached screenshot).
What's happening is that the anchor points with 0% opacity in CS6 suddenly have 100% opacity when I load the saved CS4 files in CS6.
Is this a known error? If so, how/where do I report it?
Here are the relevant CS6 and CS4 files: [URL] ....
There are no white lines when I save the image in CS5 format and load it in CS6.
View 2 Replies
View Related
Nov 3, 2013
I've received two orders of CDs for a client, and in the printed artwork there are some flaws that have me wondering what to do to avoid this.
Files were submitted in PDF format with text converted to curves. I believe the artwork is then imported into AI at the other end before going to print.
Along the edge of an object with a drop shadow, there is a fine white line showing. On the two products with identical artwork, the line shows on different edges, but appears to be where the drop shadow ends.
In other spots, there is what I would call "scratches", where, within an image there is a fine white line. This is not an edge or overlap, so I'm at a loss for this.
In another place, one character in a word essentially did not print. So I'm wondering what my "best practice" would be to avoid this. Should I "flatten" everything when I'm done, essentially converting the entire page to a single 300DPI bitmap?
Should I include text in the flattened bitmap, or is it best to leave as curves? My gut says leaving as curves preserves maximum resolution, but does it matter if it is not being scaled?
I've never before had issues with getting artwork printed from PDFs. In most cases, I imagine the print is created directly from my submitted PDF.
View 1 Replies
View Related
