AutoCAD LT :: Compatible Graphics Tablet
Jul 5, 2011New user of LT 2012. Used primarily for creating schematic drawings and floor plans. Keen to integrate a graphics tablet .
View 9 Replies
ADVERTISEMENT
AutoCAD 2010 :: Wintab Compatible Digitizer - Your Pointing Device Cannot Be Used As Tablet
Mar 26, 2013We're trying to use vtablet with ACAD 2012LT and a GTCO Rollup III 3648 on Com1, 32-bit Win7 (32-bit driver) and are having a bit of trouble with the configuration.The problem is that ACAD seems to only half-recognize it.
When we try to change the pointing device to "wintab compatible digitizer", the change won't "stick" - but I don't see an error message in the status line. The "apply" button simply continues to stay grayed out and clicking on "ok" doesn't make ACAD save the change. Thus since the pointing device remains a mouse, when we try to turn the tablet on, we get an error message that says "your pointing device cannot be used as a tablet".
However, we can move the tablet's stylus and it moves the cursor. We can also draw a line in ACAD but can't calibrate (since calibrate never becomes an option since we can't turn the tablet on inside ACAD).
Yes, UAC is off. Yes the digitizer does seem to be sending regular packets. Yes the digitizer shows up in device manager as a MS Serial Ballpoint (the mouse uses USB). They both move the cursor seemingly without conflict (there is no jerkiness).
Photoshop :: Graphics Tablet
Nov 20, 2006im looking for a good affordable graphics tablet.
View 2 Replies View RelatedPhotoshop :: Graphics Tablet
Mar 28, 2007I recently bought photoshop. I am now looking into buying a graphics tablet/stylus b/c i heard it would be a very useful tool for this program. i was looking for feedback if anyone uses one, and their opinion. is this something that would be worth the money?
View 2 Replies View RelatedPhotoshop :: Graphics Tablet
Dec 21, 2007recommend a half-decent tablet,
The primary use will be drawing in Flash / Photoshop.
Photoshop :: Things To Do In PS With A Graphics Tablet
Nov 18, 2008Got one of those Graphics Tablets to draw with and would like some ideas of projects I could do in Photoshop using it. I'm guessing a lot of you use graphic tablets (like Wacom) in your work.
I just fool around in Photoshop, but would like to have some kind of goal instead of just minor edits and scribbling. Any ideas? What do you guys do with your tablet in PS?
Photoshop :: Graphics Tablet Issues
May 11, 2005I?ve been using a budget Graphics Tablet for a while now. Whilst this is fine for general brushwork I don?t get on with it enough to use as an alternative to a mouse.
I find that every time I click the button, the pointer moves. Icons move when I open an app, and objects or layers move when I open a context sensitive menu. I also find that when making selections slowly, or just generally drawing slowly, the pointer/brush is not truly steady. I?ve covered the pad with a sheet of paper which make the tip less slippery, but not enough for steady control.
GIMP :: Set Keys Of Graphics Tablet On Pen?
Dec 11, 2011My graphics tablet is Wacom CLT-470/K (pen) without buttons on tablet. But my pen have two buttons and i want to know, how to set up them. For example i want that when i tap first button, undo the last change occurred. Of course i can set in properties of tablet driver (then tap first button, ctrl+z occured), but GIMP (!) still understand that first button (near the pen tip) is right mouse button, and second is middle mouse button, ever after reload GIMP. In old version GIMP, like 2.2.17, gimp understand pen button in accordance to properties of tablet driver, but old verstion is too unstable.
View 1 Replies View RelatedPhotoshop :: Trying To Find A Good Graphics Tablet
Dec 5, 2006trying to find a good graphics tablet and I was looking at the Wacom Graphire (6x11) and the Wacom Intuos (6x8). I would use the tablet for editing photographs and brushing.
View 7 Replies View RelatedPhotoshop :: Plug & Play Graphics Tablet
Jul 24, 2009I looked around last year before university for one of these, and had no luck, so now i'm asking before university starts again.Is there such a thing as ANY graphics tablet (not nessicarily Wacomn if they don't do one) that will work as soon as it is plugged into the USB port without any softwear drivers needed to be installed first? It would be a great help for uni, because we can't install stuff there.
View 1 Replies View RelatedIllustrator :: Blinking Cursor With Graphics Tablet?
Oct 15, 2012For the past 2 months I've been using a Yiynova 10.1 tablet to design in Illustrator CS6. Later today I have an issue where the cursor would be on place but immediately move to a random area on screen. It is quick and I can keep my pen to point where I need to. However, everytime when I do close Illustrator the tablet seems to work perfectly. Photoshop and other programs seem to respond well with the pen and tablet, but Illustrator doesn't. I have ran a windows compatibility to all previous versions of windows and there are no results. I have reinstalled my Illustrator CS6 and the tablet doesn't want to play well still.
View 2 Replies View RelatedPhotoshop :: Photo Editing - Graphics Tablet Or Mouse?
Apr 5, 2012Graphic Designers and Photoshop hobbyists. This past weekend, I bought a graphics tablet. However, I’m having a hard time seeing the benefits in this thing. For those that have tried it or use it, what are your thoughts? Do you think it was a good investment or do you prefer the good old-fashioned mouse? I would use it mainly for photo editing.
It’s starting to get easier to control my cursor on screen, but when I tried photo editing, it was annoying. The precise control wasn’t there. For instance, a mouse is on a flat surface and when I need a precise edit, I can anchor my fingers on the table to move the mouse just that tiny bit that’s needed or just steady the mouse.
With the graphics tablet, I have to hoover the pen above the tablet and every movement in my hand, registers to the cursor on the screen and I couldn’t get the cursor to move just a miniscule amount because there was no way to fully steady the pen. I also had to keep leaning forward to access the CTRL or ALT keys on my keyboard. The other problem I had was that my wrist was actually starting to hurt. Although, that might have been due to how I was sitting, with the tablet in my lap – I don’t know.
Maybe I’m rushing to learn this and not giving myself enough time to get used to it and see the benefits, but as of right now, I like the mouse SO much better and am considering returning this tablet.
CorelDRAW Graphics Suite X5 :: How To Draw Perfect Polilines On Tablet PC
Mar 10, 2012I just installed cdr x5 on a tablet pc (asus slate B121) and I like it very much. But I begin to get frustrated by the Poliline tool.
Since this tool needs you to double click to end a curve I always get curves with added nodes to the ends (it's impossible to do a double-click with a pen without moving the pen between the two clicks.
The only workaround that I found is to move away the pen from the screen far enough so that you can press the space bar to end the curve without extra nodes. But this is really extra gymnastic for your arm... and quite annoying while you try to get the job done in few minutes.
So, is there a way to use the poliline tool without "putting down" the "unclicked" node while pressing the spacebar? Something similar to the freehand tool, but with the ability to draw curve-straight lines consecutively.
CorelDRAW Graphics Suite X5 :: Can Drawing Tablet Use As Sketch Book
Apr 21, 2012QUESTION:
Is it possible to obtain a drawing tablet which can be taken out, away from the computer and be used like a sketch-book when out and about? Then, after coming home with this drawing tablet, connect it into the computer and upload all the sketches you've done when out?
I presently use a Wacom Bamboo which connects into my laptop, but I sometimes would like to just take the 'Bamboo' out - draw on it like an electronic sketchbook - come home and put all my sketches into the computer for further work.
CorelDRAW Graphics Suite X5 :: Lost RIGHT CLICK Using Wacom Tablet
Dec 22, 2012I need to use CorelDraw X5 the bigger the pain in the neck the issue becomes.
The tabket is a Wacom Intuos 3 an my pen is set up to have a right click for the lower side button, double click for the upper side button and single click for the nib. In all applications and Windows this works as expected but as soon as I run X5 I lose the right click and it takes several minutes to return after I have quit X5.
While using CorelDraw the only way to get a right click is to hold down the nib to bring up a pop up menu.
Is there a setting in the tablet driver (or CorelDraw?) that will stop this happening?
CorelDRAW Graphics Suite X6 :: Pressure Tablet Doesn't Apply Pressure Using Pencil Tool?
May 20, 2012My pressure tablet doesn't apply pressure using the pencil tool -- or any other tool-- It's a CTH470 Bamboo.
View 5 Replies View RelatedAutoCAD LT :: Is Agtek Compatible With 2013
Oct 29, 2012How do you bring in a surface created in agtek into autocad lt 2013?
View 1 Replies View RelatedAutoCad :: 2006 Not Compatible With Windows 7
Apr 6, 2012I have a new computer and I am running windows 7. Autocad tells me windows 7 is not compatible with my 2006 version.
View 4 Replies View RelatedAutoCad :: How To Change BRD To CAD Compatible Format
Jul 31, 2012I made a stand up paddle board in a program called ACU shaper which is a .brd extension, I know a guy with a hotwire to cut my foam but he needs it in CAD format.
View 4 Replies View RelatedAutoCAD LT :: HP Design Jet 430 Plotter Is Not Compatible?
Aug 6, 2013Have just got new computer with Windows 7, but my HP Design Jet 430 plotter is not compatible
View 2 Replies View RelatedAutoCad 2D :: Workspace Is Not Compatible With Editable Task
Mar 16, 2012in auto cad structural detailing 2012 when i want to switch to asd reinforcement classic it will now say the workspace is not compatible with the editable task,
View 1 Replies View RelatedAutoCAD LT :: Linetype Scale Not Compatible Between Two Drawings
Feb 8, 2013I'm using AutoCAD LT 2007 and have a problem with linetype between two drawings. I have a standard key which I use on a number of drawings, problem is when I copy from my original file (in model space) to paper space on another drawing the linetype isn't viewed the same.
I've set LTSCALE to 1. PSLTSCALE to 0, Global scale factor to 1 in both files but still no joy.
AutoCAD LT :: 2012 Backwardly Compatible With 2000
Oct 24, 2011I want to upgrade from LT2000 to LT2012, will I be able to read all my files created in LT2000?
View 1 Replies View RelatedAutoCAD 2010 :: Can 2012 Compatible With MAC Lion OS
Feb 1, 2012Can AutoCAD 2012 Compatible with MAC Lion OS?
View 1 Replies View RelatedAutoCAD Map 3D :: Google Earth Extension Compatible With Vista
Dec 29, 2011Just want to know whether Google Earth Extension is compatible for Window Vista? Because received an error message when i try to load Google Earth Extension into my AutoCAD Map 3D 2010. Below are the step that i've done:
Install Google Earth Extension - No error (so i assumed the installation success).
Appload - Successfully loaded.
Menuload - Error message occurred as shown below:
AutoCAD Inventor :: Autodesk Vault Is Not Compatible With Localhost
May 14, 2011I have upgraded my inventor 2011 to 2012; I kept the 2011 inventor in my PC. Vault 2011 runs great I can log-in and out of local host on my 2011 version of the vault without any problem. I am having problem with 2012 vault log-in. in get error massage.
Autodesk vault 2012 is not compatible with the localhost.
AutoCAD Inventor :: 2012 Compatible With Vault 2010?
Apr 4, 2011curious and cant seem to locate it on the main website
View 3 Replies View RelatedAutoCAD 2010 :: Linetype Scale Not Compatible Between Two Drawings
Oct 5, 2012I work very closely with a customer, and have been asked to implement their drafting standards for a dwg file they received from another vendor. I have attached two drawings, 1 (their vendor's) and 2 (mine, in progress). When opened, I notice the linetype scale *appears* different between the drawings (note the differences within "LINE LEGEND" section of both drawings). It *appears* as though Drawing 2 has double the linetype scale of Drawing 1.
I realize that within Drawing 2 I could set the LTSCALE variable to 0.5, but that seems like a work-around and may cause problems with other aspects of the customer's drafting standards in the future.
I've already confirmed that both drawings have the same values for LTSCALE, PSLTSCALE, MSLTSCALE, CELTSCALE. I've also already confirmed that, for the "PACKAGED EQUIPMENT" entry with the legend, the properties dialog box shows the exact same values for all fields. Lastly, (trying [URL] .....) I re-loaded the linetype for PHANTOM2.
I'd like to have them both appear the same, if possible.
AutoCad :: Make File Compatible With Lightscape 2007
Apr 8, 2013I'm using Cad and i'm trying to get a floorplan drawing into Lightscape 2007. The CAD drawing appears fine when loaded into Lightscape 2012, but because of the project we have to use Lightscape 2007. Unfortunately only parts of the floorplan appear when loaded into Lightscape 2007, I've played around with layers, I've saved it as the earliest version of CAD that I can and nothing works. how to load a CAD drawing into Lightscape 2007?
View 9 Replies View RelatedAutoCAD Inventor :: Making Files Compatible With Other Versions?
May 7, 2013I have 2014 Inventor Professional at my home and I am working on a project. I would like to work on it at work on 2013 Inventor Professionl. Is there any way I can make my 2014 file open on Inventor 2013?
View 1 Replies View RelatedAutoCAD 2013 :: Make A File Compatible With Lightscape 2007?
Apr 8, 2013I'm using Cad and i'm trying to get a floorplan drawing into Lightscape 2007. The CAD drawing appears fine when loaded into Lightscape 2012, but because of the project we have to use Lightscape 2007. Unfortunately only parts of the floorplan appear when loaded into Lightscape 2007, I've played around with layers, I've saved it as the earliest version of CAD that I can and nothing works. How to load a CAD drawing into Lightscape 2007?
View 1 Replies View Related