Is it possible to loft a shape which includes a hole or a section missing?
I am trying to loft the following shape but it doesn't seem to work with the missing section in the middle. Currently the 2 sketches are the same but in the actual design they aren't. i wanted to test if it would work with the same sketches but it doesn't.
I am having trouble trying to get the Loft-1 to run the same shape as Revolution-2 .Picture 1-1 shows how Loft-1 is slightly off centre to Revolution-2 at the top .could i model the Loft-1 and Revolution-2 using different tools in one command making it a smooth shape. Another problem i have is how do i make Revolution-2 at the end terminate into Revolution-1 smoothly.I tried using Loft but it kept getting fail message.Picture 1-2 shows where to terminate the end into the Revolution-1 body.
Inventor 2012
I am trying to loft a port shape for a project. I have been able to loft pretty much the same thing when part of a larger model but this time around it keeps giving me an error.
In the past i will loft the whole part then remove the inner portion to get the port.
When I make a loft, from a 12x12 square to an 8" circle (12" high for the sake of arguement), the corners of the square kind of loft up to the circle where it's corners would be...leaving a sharp break between the planes
Is there a way to make it look like the sheet metal lofted flange appears? So that the corners of the square drift to the quadrants of the circle, making a smooth transition?
Inventor 2014
Windows 7 Pro SP1
Intel(R) Core(TM) i7-3770k CPU @ 3.50GHz
16GB RAM
NVIDIA Quadro 4000
3D Connexion SpaceMouse Pro
Im trying to create a shape like the attached image using sheet metal loft from one sketch to the second sketch. No problem doing that but i want to extend the neck on the small end 1 inch like the attached image.
Currently the product is produced using 4 panels brazed together. I want to create the product with 2 bent panels 90 degrees that are split apart from the loft.
Not sure if this even possible in the real world sheet metal house to develop the flat pattern.
The objective is to section a part, selecting a center of the hole (side view, not top view) to attach the section line.
In the hole's top view we can select the center hole to attach the section view, but in the side view, i can´t find any attach point, even if i have a center line.
I know we can edit the section line later and create some construction lines to center the section line with the hole, but i wonder, there's a better process, more automatic, to achieve this?
I need a custom linetype that includes a shape - a rectangle or a star.
How do I define this "shape" in my custom linetype?
Cross section includes hidden elements,
In the attached screenshot, the columns appear in the section while they are hidden in the plan!
What might be the issue here? why the cross section includes the columns?
I have a section view in which the section lines are MIA. Is there a way to retrieve them? So I can change the scale?
View 4 Replies View RelatedI need to divide a bridge deck section (sort of trapezoidal shape with circular hollow section inside) but I need to keep the centroid level of each section to be at the same height. is there any simple way of doing it using Autocad 2014?
View 0 Replies View RelatedI have a section line that is missing one of the teminator arrows and the label.
I have checked the styles, tried to edit the style but cannot make the terminator and label visible.
Inventor 2013
Win7 x64
I've got a template with a set of Object defaults for an Inch drawing and a set for a Metric drawing. I've just noticed that within my metric set, if I insert a hole table with tapped holes, the font on the tapped holes doesn't match the other hole types. I'm searched around, but all the settings for the hole table style reference the same text style. (Please see the attached image.)
So is there a way to set a certain hole type to have a certain font or size within a hole table? Because if there is, I'd obviously like to remove it..... But I can't seem to figure out where the issue is.
I am trying to add a hole to an existing hole chart. I drop the part into a new drawing, set the ordinate "zero", and add a hole chart by selecting a few holes. When I attempt to edit the chart: click chart, right click "edit", click add hole, select new holes, right click to create, the "create" selection is greyed out and all I have to choose from is cancel. I searched the forum here but could not find a reference to this a know issue. Am I doing something wrong or is this a glitch of 2013.
We are running win7 x64 machines and this happens on both the 2013 Ultimate and Premium editions of the product.
I have had this problem intermittently for a few weeks since going to Inventor 2013 SP1.1. I have a part within an assembly and that part has holes created in it before assembling it with other parts. Now when I try and create a hole table in a drawing of the assembly I cannot select hole edges and the hole table is blank when trying to create it automatically from view selection. I originally thought it may be an alignment issue but I have since aligned everything correctly and it still persists. I can create the hole table if I import in just the part into the drawing but it will not allow me to create the table on the whole assembly.
I can also create the hole table if I use "centred pattern" and create cross hairs on all of the holes however it does not give me correct annotations for the holes as shown in attachment and I can manually change the annotations but seriously this should not be required. As shown in the screen shot it reads as A1 down to K1 instead of A1 to A10. .
Question: Is it possible to control the Hole Dimensions called out on the Hole Chart? As in controling leading/trailing zeros for main hole dim, alt home dim and tolerances? Can you combine the Main Dim with the Alt dim in a single column, separated with parentheses? (same with tolerance?)
View 5 Replies View RelatedI would like to use the hole command to place a hole in a part. When I place the hole it won't allow me to use one of the origin planes to locate the hole from. Can I only locate holes off edges?
View 4 Replies View RelatedI have an assembly that contains a part and a hole feature (the hole feature is at the assembly level). Using the api, I'm trying to get the hole location relative to the part's coordinate system in a without using the holeplacementdefinition.distance property, this way I can get the hole location regardless of the way it was defined.
View 2 Replies View Relatedi use hole feature names in hole table.
i assign hole names attribute to hole feature but dont get attribute hole table.
how to get hole names in hole table.
While creating holes in a part, a small counter shows (when you click on a point) of how many holes there are.
Programs:
Solidworks (1998-2011)
Autodesk Inventor (R8 - 2013)
Autodesk AutoCad 2D
Autodesk AutoCad 3D
Catia V5
SolidEdge
Anvil (Very old program!)
Pro/E
I am having multiple problems creating a loft. Firstly, it seems as if the "loft" command remembers and uses history of the objects to be lofted, which in my case meant that instead of lofting the scaled down (correct) version of a shape, it insisted on lofting the former, out-of-scale version. It would be great to know if there's a more conveniant workaround to this than redrawing the shapes (as I ended up doing).
Secondly - and this is where I'm stuck now - 3ds will not let me do a loft with the new, redrawn shapes. The loft accepts two of the shapes, but will not let me select the remaining three, claiming that "the shape has a different number of curves than others in the Loft". My question is thus: What should I do to be able to see and edit the number of curves in the shape, so that my Loft will be valid?
I have a polygon with a hole in it. I want to export this exterior polygon to a shapefile. I want the shape file to display as a "donut" if you get my meaning. The shape keeps coming in completely hatched ignoring the island within. Is there a way to do this with the 2008 software?
View 9 Replies View RelatedI am attempting to make a frame that includes a couple bent members.
This is a side view of my frame. I am trying to make it so that the outer members are simply one piece of angle iron that is notched and bent at the angles. I have not been able to figure out how to do this and as it stands right now, that piece of the frame is made up of 5 seperate lengths of angle iron. Is there any way to get it as one piece in the frame generator or any other way for that matter?
Autodesk Inventor Professional 2011
Windows 7 for Mac
80GB HDD Partition
Intel Core 2 Duo @ 2.66 GHz
2.75 GB Usable RAM
I have a .PNG file. I have a rounded rectangle. I want to take the .PNG shape that I have and cut that shape (transparent) into the rounded rectangle.
Using CS 5.5.
I need to shell out a Loft in the attached IV 2012 part file.The Loft i tried also as a new solid but the shell also cuts into the cylinder ( revolution 1 ) . I only want the 2 sides and bottom of the Loft to be Shelled, not the cylinder. What do i need to change to get the shell to work?
View 4 Replies View RelatedI am trying to verify the bending strength of a solid part. Need to calculate the section modulus on certain cross section. Don't know how to do it using inventor.
View 7 Replies View RelatedThe section view behaves strangely with the ‘section participation: none’ components
Invertor2012 sp2
Win7 x64
why my section is not parallel with my section line. I did constrain my section line in the section line sketch.
View 2 Replies View RelatedI'm loft retarded. What I did here was loft to a tangent work plane, then did a sketch on the top surface and extruded the shape that I want. There has to be a better & easier way.
View 9 Replies View RelatedI have a cylinder on top of a curved surface; I want to make the cylinder land adaptively to the surface, so I projected the circular face of the cylinder in the surface, which ended up being a 3D sketch. I tried to loft a solid between both curves, but it always gives me errors. Some examples are:The attempted operation did not produce a meaningful result. Try with different inputs.Multiple disjoint loops found in a profile section.
I have had success when trying to do the same thing with curved surfaces in two dimensions only (e.g. extruding a 2D curve), but I think the error is produced since the curved face I am trying to use belongs to an elipsiod.
Okay I've been building random things to teach myself how to use Inventor and right now I'm stuck on a rim I'm creating. My question is.. is there a way to copy and paste a lofted item since there are three parts to it (2 planes and 1 guide) because I need 4 more spokes and if I copy the loft it copies all three parts seperately. Then when I paste and orientate the small end of the loft to the plane I want it tells me "Unsatisfied Geometric Inputs".
View 4 Replies View RelatedI have created a loft from 4 different sketches. Now I want to make a drawing with the front, side view and the dimensions of the 4 profile sketches from the loft. But I can’t find a way to put the sketches from the part on my paper. It works with copy-paste ;^) but this is not the way I want it (it’ll not change when I change the profiles in the part).
View 6 Replies View Related