AutoCAD Inventor :: Putting Multibody Part Into Assembly?
Dec 21, 2013
I created a multibody part: a plug and a socket are the two bodies. The socket mounts on a surface. In order to create an assembly so I can check for interference, I want to place this first body onto a surface in an assembly/ Then I need to connect the two objects with a cord. I suspect that the "cord" could be represented as a "hose". I need to make sure that the 10-inch cord will fold up properly inside the case. I have measured the minimum bend radius of the cord, which is about one inch.
I do not seem to be able to find how to get the pipe-and-tube library into my copy of Inventor 2014. Besides, I'm only guessing that this will be the right way to model the cable that connects the plug and socket.
View 3 Replies
ADVERTISEMENT
Sep 11, 2013
For some multibody parts I use view representation in order to show for example one or more bodies only. For that I lock the view representation. Usually I have more than 3 of them. The part can have different configurations. The problem is that when a new solid is made, it will be visible in the locked view representations also. I thought the lock option should work in the same way like for assemblies, because if you lock the view in an assembly new parts wont be visible.
AIP 2014
Windows 7 x64
Dell Precision T7400 Intel(R) Xeon(R) CPU X5472 @ 3.00GHz (4 CPU's), 8Gb RAM, NVIDIA Quadro FX 5600 1536MB GDDR3
View 5 Replies
View Related
Aug 23, 2010
I am trying to access the material and/or renderstyle for each solid in a multibody part document, but it seems like this is not supported in the API.Is this correct?
If this is correct, why the HasMultipleSolidBodies property?
View 3 Replies
View Related
Dec 21, 2013
What I have is a sketch of a hole. The hole has a flattened side to prevent the part from rotating. What I want to be able to do is to put this "part" (an ipt file with just the sketch in it) on any surface of any case, top, left, right, bottom, or even the front or back. So it needs to rotate 90 degrees in x, y or z or combination thereof.
I've been told several things by the local assistants, such as "copy it, place it on the desired plane in the .ipt file, delete the original sketch, then insert it into the assembly", which doesn't work, or use the Component>Rotate command, which gives me infinite degrees of freedom, making it hard to tell when I've rotated 90 degrees in the correct axis.
The sketch will be used in a number of assemblies, including machined aluminum, 3D printing, and laser-cut acrylic.
In essence, I want to place this sketch flat on a surface, then extrude "To" the other side of the surface. I want the flat edge of this sketch (the side that keeps the part that will be inserted in the hole from rotating) constrained to be parallel to one of the edges. I have looked around a lot through the documentation and several other Web sites, and there does not seem to be an answer to this.
The sketch is simple: a circle with a flattened side, so if that sketch needs to be discarded, it is no major "expense" to me in effort. But given my projected series of projects, creating reusable drawings is going to be important. So how should I be thinking of this?
View 9 Replies
View Related
Sep 1, 2012
Is there a way to automatically put the part list on many pages, instead of warping it on the same page?
View 3 Replies
View Related
Mar 28, 2012
Dear Sir, In particular project, when I insert part in Assembly file, It is inserted as a Tube & Pipe run part. so that It is not Grounded automatically. What is the settings by which I can insert as a normal part in assembly file ? I have attached herewith the JPG file also.
View 3 Replies
View Related
Apr 1, 2013
I`m looking for the iLogic code that can change one parameter (user defined) for each (ipt) part in assembly (iam)
The one below doesn`t work.
Sub Main Dim oApp As Inventor.Application = ThisApplication Dim oAssy As Inventor.AssemblyDocument = oApp.ActiveDocument For Each oSubDoc as Inventor.Document In oAssy.AllReferencedDocuments On Error Resume Next Parameter(oSubDoc, "FH") = 15.26 Next End Sub
View 5 Replies
View Related
Dec 11, 2013
I would like to simplify this assembly into one seamless part for FEM calculation:The assembly consists out of parts that, in reality, will be welded together. Due to their form, there is no way to place them exactly onto each other, therefore there are slight gaps between the parts:
Now when I try to merge the assembly into one part via "simplify" --> "create simplified part" and choose "single solid body with seams between planar faces merged", Inventor does not fill these gaps (even though it displays only one part in the bottom right corner of my window). Unfortunately, the remaining gaps brings "contact" problems in the FEM simulation.
how to close the gaps and really merge the assembly into one part?
View 6 Replies
View Related
Nov 15, 2013
New user 2014
Part created in assembly does not update to part file.
View 9 Replies
View Related
Mar 29, 2012
I have a part that has protrusions. When i mate that part up to another part that second part needs to have cutouts/holes to receive those protrusions.
i mainly use it in sheetmetal parts. and use the rectangular protrusions on de contour to mate up with corresponding cutouts in the other sheet. this works with positioning and also makes for a nice weld spot/area.
But also for making holes to accommodate a mold pin used in custom punch dies. I want the intervening part to receive a corresponding (propperly tolleranced) hole automatically. Much like a bolted connection does.
same for parts like circlips. i want them to automatically generate the seat in the part it's mated to. Rather than using the axle generator.
Ofcourse one can place the parts and do an in assembly interpart projection and go from there, but i want the part to generate the (predifined) modification to the other part. It would save time and also reduces problems as the parts are moved about or even removed.
View 7 Replies
View Related
Jul 1, 2013
I have an assembly with 10 parts in it. We use many assembly features at the assembly level (Revolve cut, Extrusion cut..etc). How to find the mass difference of each part by comparing at its parts level and its assembly level.
View 1 Replies
View Related
Oct 3, 2013
I have a two part duct fire damper assembly. The IDW has the combined two part assembly, which I know how to turn the CoG on, so that it can be dimensioned. The problem is each piece will more than likely be hoisted separately so I would like to show the CoG for each piece, not the combined master assy.is there a way to do this?
Inventor 2014
Windows 7 Pro SP1
Intel(R) Core(TM) i7-3770k CPU @ 3.50GHz
16GB RAM
NVIDIA Quadro 4000
3D Connexion SpaceMouse Pro
View 5 Replies
View Related
Aug 20, 2013
If I want to find part which is inside another part or assembly, which means no matter how I turn camera, I always cannot see that part.
Does inventor has this function? Or is it possible to develope by .NET API?
View 4 Replies
View Related
Feb 7, 2013
I can't seem to find how to use the Inventor 2012 API to project an entire sketch profile from one .ipt to another .ipt file from within an .iam file.
i7-2720QM Dell Precision M6600, Win 7 Pro 64-bit, 8GB RAM
Autodesk Product Design Suite Ultimate 2013
Autodesk Vault Professional 2013
View 2 Replies
View Related
Dec 3, 2013
Why when I mirror a part in an assembly the mirrored part gets a new part number? I want to mirror only the position of the part which is always the same part. Is it possible to do that in Inventor?
View 7 Replies
View Related
Sep 30, 2013
I'm doing a fairly big one-off for use at our factory so am going the multibody ipt route. I have a design view setup within the ipt with nearly all solids switched off but when working within a sketch this seems to be ignored. I want to make sure I am projecting from sketches not bodies so if I need to tweak things later and bodies change the model won't fail.
I.e. the bodies all become visible when working in a sketch where as before going into the sketch the bodies weren't showing.
IV2014 SP1 64bit
Dell Precision T7500, Geforce GTX 480, DirectX11 306.97
SpaceExplorer 4.04, 3DxWare 3.12.2
Twin Intel Xeon E5506 2.13GHz, 12GB RAM, Win7 Pro SP1 64bit
View 9 Replies
View Related
May 8, 2013
I am in Inventor customization using VB.net as development language.
There is one issue which is troubling me from some time.
Is it possible to identify the name of parent assembly of part/sub-assembly.
For Instance there is a Sub-Assembly/Part, how can i identify the parent assembly using VB.net without opening that assembly.
View 7 Replies
View Related
Oct 1, 2013
I have an assembly of stair made from steel. There are lots of part the same. Is there a way to make a hole (inside assembly) to one and that hole would appear on all of them.
And another problem, how can I made cut (inside assembly) through more then one part so that would affect a part also when I open it alone.
View 9 Replies
View Related
Oct 6, 2012
I am capturing a book-case design that I made long ago into Intentor. I am almost finished, and I want to produce .dwg files and a bill of materials of parts that can be held.
For various reasons, almost all the items in the existing design are assemblies, and the underlying parts correspond more or less to half of physical parts that are contained inside a repeating cell. I will almost certainly continue using this approach.
A simplified design that shows this is at [URL]..... in the file Display.iam
I created the file Slat.ipt by using derive (Slat.iam).
If I replace the Slat assemblies with the file Slat.ipt, the bill of materials will show parts that correspond to physical parts that I can hold in my hand, or list on an invoice. I can do this with many, many mouse operations.
To make this modification quickly, I attempted to do Component -> replace on the Slat assembly. I use this operation a lot to replace one version of an assembly with another. When I do it with a .ipt file, the system pauses for some tens of seconds, then crashes.
A brute force work around is to use the mouse to do the replacement, essentially rebuilding the entire project in place.
View 1 Replies
View Related
Sep 27, 2013
When i create a part in an assembly, i select a plane or face with the cursor, but then i select again a plane for the sketch.
Why this double selection, and what does the first selection do, if the part is actually sketched on the plane i selected in the second time.
View 8 Replies
View Related
May 28, 2013
Normally you start with new models/assemblies/and drawings when you use the templates the naming by default is part1.ipt, assembly1.iam, drawing1.idw
I am currently at part431.ipt and assemby57.iam
I am concerned I may eventually reach part1000.ipt LOL
Currently using Inventor2012.
View 6 Replies
View Related
Aug 1, 2013
as you can see from the image, the blue cone isnt transparent. i set the material properties to "clear blue" to make it "see through", i want to show whats under the cone. however the cone isnt transparent. how can i get the cone to be transparent? is there a step im missing?
View 7 Replies
View Related
Nov 25, 2013
I've created a BOM of parts from a large assembly and it has an item just listed as pt.1.
View 9 Replies
View Related
Sep 14, 2012
I have a part that is inserted in an assembly. If I change the color of certain portions of the part it isn't reflected in the assembly.
View 5 Replies
View Related
Mar 26, 2012
I have written a program where i will copy inventor assembly tree to custom form in tree format. Now my problem is whenever i click a part in tree i must edit the part. I am trying to access the Fx parameter/IAssembly to use it but not getting desired results .
View 8 Replies
View Related
Jul 30, 2012
I need to use parameters of a part in an assembly. How to do this? Do i need to define a rule? How is this done?
Can i do it without using an Excel sheet as a parameter source for both the assembly and the part? The target is to have inventor update an array of assets as soon as the width of a part is changed whether in Excel or in the Factory properties of the asset.
View 5 Replies
View Related
Aug 29, 2013
I have an assebly where i have imported parts and other assemblies. Unfortunatly during process of assigning them together they have rotated by various angles.Is it possible to somehow "reset" the rotation of part according to global xyz?
View 3 Replies
View Related
May 16, 2013
My need is to assembly parts into an assembly by a known position in the assembly. The part has a UCS and I create UCS on the assembly programatically. What I cannot do is to constrain the two UCS. I tried this (Inventor 2013 x64 on W7/W8 64, c++ 2010 by the way DEBUG mode is not working from the IDE):
CAssemblyComponentDefinition compDef = doc.get_ComponentDefinition();
// MOdules UCS
CUserCoordinateSystems coords = compDef.get_UserCoordinateSystems();
CTransientGeometry geom = m_InventorApp.get_TransientGeometry();
CMatrix matrix = geom.CreateMatrix();
[code]...
View 3 Replies
View Related
Aug 5, 2013
What is the meaning of the (*) sign near the part (see picture atttached)?
View 1 Replies
View Related
Sep 14, 2012
I'm using 2010 and maybe this has been addressed in subsequent versions, i don't know.i've designed parametic platform that I would like to insert into an assembly and have it prompt me for elevation and orientation. Short of VBA code, i'm not sure I can do this. I AM trying to make the process as simple as possible for use by people who will not be overly familiar with Inventor. The easier it can be done, the sooner it can be adopted and more people taught how to actually use it.
I know I can bring it in and constrain it different axes and planes.
I also know that I can insert a piece into an assembly and ground it at 0,0,0. Using that I can ground it at 80 feet in the air or whatever elevation I choose using the occurrence tab of iproperties for the part/assembly. That in and of itself goes a long way toward what i'm trying to do. There's also a rotational setting there that would work for setting an orientation, but it's greyed out. In fact, in any example I try and make, it's always greyed out.
I've tried doing it as an iassembly as well, but there doesn't seem to be any provision in iassemblies for making custom values like there is in an ipart.
Either a dialog to prompt for the info or via something like the occurrence tab is fine.each identical assembly/part has to be individually constrained to get the correct orientation?
View 9 Replies
View Related
Nov 3, 2013
I'm trying to design a linear bearing that is composed of a billet of material to which six ball bearings are bolted. I was able to create a part representing the ball bearing from the manufacturer's dimensions. I then modeled a lock washer as a part, then an assembly consisting of a ball bearing and a lock washer. I then created an assembly from that assembly, with six of these ball bearing/lock washer assemblies in the desired orientations.
Now that I have the ball bearings oriented in space the way I need them, I need to model the billet to which they will all mount. I did things in this order because the ball bearings are metric, yet the rest of my design is in imperial units, and it just seemed easier to orient the bearings (which will interface with yet another assembly that I have yet to design) first.
I'd like to create my billet using the assembly as a reference. The assembly will tell me where I need holes in the billet to mount the bearings, where I need to cut out material for clearances, etc. I can't figure out how (or if) I can import my assembly into my part file, or what other tools are available to accomplish this task.
I'm attempting to model something similar to this. I've got the six bearings oriented in space, now I need to make the block to which they mount.
View 5 Replies
View Related
